Page History

...

HTML

<img src="https://jenkins.onosproject.org/view/QA/job/postjob-VM/lastSuccessfulBuild/artifact/FUNCintent_onos-2.2unexpected ONOS branch_20-builds_graph.jpg", alt="FUNCintent", style="width:525px;height:350px;border:0">

commit a800c001e939e96936ddd1d62d41b78ebb49a162 5fbf6bfe080b602de7263f1549090eef490c09ce (HEAD, origin/onos-2.2, onos-2.2review/andrea_campanella/24493)
Author: Jian Li Andrea Campanella [pyguni@gmailandrea@opennetworking.comorg]
AuthorDate: Fri Mar 19 1526 10:0334:32 30 2021 +09000100
Commit: Jian Li Andrea Campanella [pyguni@gmailandrea@opennetworking.comorg]
CommitDate: Sat Fri Mar 20 0126 21:2503:00 51 2021 +0900
Minor fix on floating IP and SNAT feature at kubevirt networking0100

[VOL-3922] Invalidating the pipeliner cache if the driver for a device changes

Case 1: Pull onos branch and build onos on Teststation. - PASS

...

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules -

...

FAIL

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

...

FAIL

Assertion Result for VLAN Encapsulated host intent
Install Intent State Passed
Encapsulation intents check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents PassedAfter removing intents Flow State Failed

1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules -

...

FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
FAIL

Assertion Result for NOOPTION point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

2000.2 IPV4 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
FAIL

Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

2000.3 IPV4_2 2000.7 VLAN: Add point intents between h5 h1 and h21 h9 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
FAIL

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

2000.4 SDNIP-ICMP: Add 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

FAIL

Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL

Assertion Result for Dualstack1 IPV4 with mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

2000.7 VLAN: Add point intents between h5 and h21 - FAIL

Assertion Result for VLAN IPV4 with mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Intent State Passed
Link Down Intent State PassedLink Down Flow State PassedFailed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Pingall Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State PassedFailed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State PassedFailed

6000.2 Installing Multi to Single Point intents with partial failure allowed 2000.8 VLAN: Add point intents between h5 and h21 - FAIL

Assertion results Result for VLAN IPV4 multi to single with partial failures allowedpoint intents with VLAN treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State PassedInitial
Intial Flow State PassedFailed
Initial Connectivity Check Ping Passed
Link Down Passed
Link Down PassedLink Down Intent State Passed
Link Down Flow State PassedFailed
Link Down Topology State Passed
Link Down Connectivity Check Pingall PassedIsolation link Down
Link Up Passed
Partial failure isolation link Down Link Up Intent State PassedPartial failure isolation link Down
Link Up Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Failed
Link Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State PassedFailed

6000 2000.3 NOOPTION: Install and test single point to multi point intents 9 1HOP: Add point intents between h1 and h3 - FAIL

Assertion results Result for 1HOP IPV4 single to multi point intent with no options setmac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State PassedInitial
Intial Flow State PassedFailed
Initial Connectivity Check Ping Passed
Link Down Passed
Link Down PassedLink Down Intent State Passed
Link Down Flow State PassedFailed
Link Down Topology State Passed
Link Down Connectivity Check Pingall PassedIsolation link Down
Link Up Passed
Isolation link Down Link Up Intent State PassedIsolation link Down
Link Up Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Failed
Link Up Topology State Passed
Link Up Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State PassedFailed

6000.4 NOOPTION: Install and test single 2000.10 Add point to multi point intents with partial failures allowed using VLAN Encapsulation - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowedInstall Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State PassedInitial
Intial Flow State PassedFailed
Initial Connectivity Check Ping Passed
Link Down Passed
Link Down PassedLink Down Intent State Passed
Link Down Flow State PassedFailed
Link Down Topology State Passed
Link Down Connectivity Check Pingall PassedIsolation link Down
Link Up Passed
Partial failure isolation link Down Link Up Intent State PassedPartial failure isolation link Down
Link Up Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State PassedFailed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State PassedFailed

Case

...

3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

3000.2 IPV4: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

3000.3 IPV4_2: Add single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed
After removing intents Flow State Failed

3000.4 VLAN: Add single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

3000.5 VLAN: Add single point to multi point intents - FAIL

Assertion results for single to multi point intent with VLAN treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

This test case

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

3000 4000.1 NOOPTION: Install and test single Add multi point to multi single point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

FAIL

Assertion results for NOOPTION multi to single point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

4000.2 IPV4: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Bad Sender Ping Passed
Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

4000.3 IPV4_2
4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

FAIL

Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State PassedInitial
Intial Flow State Failed
Initial Ping PassedInitial Connectivity Check
Bad Sender Ping Passed
Link Down Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State PassedFailed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State PassedFailed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State PassedFailed

6000.2 Installing Multi to Single Point intents with partial failure allowed 4000.4 VLAN: Add multi point to single point intents - FAIL

Assertion results for IPV4 multi to single with partial failures allowedpoint intent with IPV4 type and no MAC addresses in the same VLAN
Install Intent State Passed
Flow duration check Passed
Initial Intent State PassedInitial
Intial Flow State Failed
Initial Ping PassedInitial Connectivity Check
Bad Sender Ping Passed
Link Down Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State PassedFailed
Link Down Topology State Passed
Link Down Connectivity Check Pingall PassedIsolation link Down
Link Up Passed
Partial failure isolation link Down Link Up Intent State PassedPartial failure isolation link Down
Link Up Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Failed
Link Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State PassedFailed

6000 4000.3 NOOPTION: Install and test single 5 VLAN: Add multi point to multi single point intents - FAIL

Assertion results for IPV4 multi to single to multi point intent with no options setVLAN ID treatment
Install Intent State Passed
Flow duration check Passed
Initial Intent State PassedInitial
Intial Flow State Failed
Initial Ping PassedInitial Connectivity Check
Bad Sender Ping Passed
Link Down Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State PassedFailed
Link Down Topology State Passed
Link Down Connectivity Check Pingall PassedIsolation link Down
Link Up Passed
Isolation link Down Link Up Intent State PassedIsolation link Down
Link Up Flow State Failed
Link Up PassedIsolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State PassedFailed

6000 4000.4 NOOPTION: Install and test single 6 ENCAPSULATION: Add multi point to multi single point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi VLAN Encapsulation multi to single point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State PassedInitial
Intial Flow State Failed
Initial Ping PassedInitial Connectivity Check
Bad Sender Ping Passed
Link Down Bad Recipient Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State PassedFailed
Link Down Topology State Passed
Link Down Connectivity Check Pingall PassedIsolation link Down
Link Up Passed
Partial failure isolation link Down Link Up Intent State PassedPartial failure isolation link Down
Link Up Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Failed
Link Up Topology State Passed
Link Up Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State PassedFailed

Case

...

5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - FAIL

Assert result for IPV4 host intent between h1, moved, and h9
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Pingall Passed
Remove Intents PassedAfter removing intents Flow State Failed

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Failed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Failed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Failed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Failed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Intial Flow State Failed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Failed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Failed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Failed

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Failed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

...

Failed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow

...

Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000 5000.2 DUALSTACK1IPV4: Add host intents between h3 h1 and h11 h9 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Failed
After removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down PassedIsolation
Partial failure isolation link Down Intent State Passed
Isolation Partial failure isolation link Down Flow State Passed
Isolation Partial failure isolation link Down Topology State Failed
Isolation Partial failure isolation link Down Connectivity Check PassedIsolation
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall
Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State FailedPassed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter PassedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.2 IPV4: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
Initial Iperf Failed
Remove Intents Passed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point
1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS 1000
2000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check failed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents PassedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.

...

0 - Using Flow

...

Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 0 OVS running in Mininet and compile intents using Flow RulesObjectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.

...

0 - Using Flow

...

Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 0 OVS running in Mininet and compile intents using Flow RulesObjectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.

...

0 - Using Flow

...

Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.

...

0 - Using Flow

...

Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State PassedFailed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received PassedRecieved Failed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case

...

10: Start Mininet topology with OF 1.

...

0 switches - PASS

Start mininet topology with OF 1.3 0 switches to test intents, exits out if topology did not start correctly

11 10.1 Starting Mininet topology with OF 1.3 0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 0 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.

...

0 - Using Flow

...

Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 0 OVS running in Mininet and compile intents using Flow RulesObjectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.

...

0 - Using Flow

...

Objectives -

...

FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 0 OVS running in Mininet and compile intents using Flow RulesObjectives

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
FAIL

Assertion Result for NOOPTION point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.2 IPV4 2000.9 1HOP: Add point intents between h1 and h3 h9 - PASS FAIL

Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.3 IPV4_2: Add point intents between h1 and h9 2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for 4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

...

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.

...

0 - Using Flow

...

Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000 4000.2 IPV4: Add host intents between h1 and h9 multi point to single point intents - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

6000.1 6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case

...

17.1 Enabling Flow Objectives - PASS

...

1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow

...

Rules - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesRules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow

...

Rules -

...

PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesRules

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

PASS
2000.2 IPV4: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

...

PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow

...

Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesRules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow

...

Rules - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow ObjectivesRules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Rules

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Rules - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Rules - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 - PASS
2000.9 1HOP: Add point intents between h1 and h3 - PASS
2000.10 Add point to point intents using VLAN Encapsulation - PASS
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000.1 NOOPTION: Install and test single point to multi point intents - PASS
3000.2 IPV4: Install and test single point to multi point intents - PASS
3000.3 IPV4_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS
3000.5 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed - FAIL

Assertion results for IPV4 multi to single with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point 4 NOOPTION: Install and test single point to multi point intents with partial failure failures allowed - FAIL

Assertion results for IPV4 single to multi to single point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State FailedPassed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved FailedReceived Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Failed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved Failed
Remove Intents FailedAfter removing intents Flow State Passed

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

Case 18: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

18.1 Stopping and Removing Scapy Host Components - PASS
18.2 Stopping Mininet - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

13.1 Create scapy components - No Result
13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

15.1 Send packets from each host to the first host and confirm onos discovery - PASS
15.2 Populate hostsData - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

17.1 Enabling Flow Objectives - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
1000.4 1HOP: Add host intents between h1 and h3 - PASS
1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
1000.6 VLAN2: Add vlan host intents between h4 and h13 - PASS
1000.7 Encapsulation: Add host intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL

Assertion Result for NOOPTION point intent
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV4 no mac address point intents
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point 1000.1 IPV4: Add host intents between h1 and h9 - PASS
1000 2000.2 6 DUALSTACK1: Add host point intents between h3 and h11 - PASS 1000
2000.3 DUALSTACK27 VLAN: Add host point intents between h1 h5 and h11 h21 - PASS 1000
2000.4 1HOP8 VLAN: Add host point intents between h1 h5 and h3 h21 - PASS
1000 2000.5 VLAN19 1HOP: Add vlan host point intents between h4 h1 and h12 h3 - PASS 1000
2000.6 VLAN2: Add vlan host intents between h4 and h13 10 Add point to point intents using VLAN Encapsulation - PASS 1000.7 Encapsulation: Add host
2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS
1000.8 Confirm that ONOS leadership is unchanged - PASS

...

FAIL

Assertion Result for BANDWIDTH ALLOCATION for point intent
Install Intent State Passed
Bandwidth Allocation check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Failed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives -

...

PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

2000 3000.1 NOOPTION: Add Install and test single point to multi point intents between h1 and h9 - PASS 2000
3000.2 IPV4: Add point intents between h1 and h9 - PASS
2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h21 - PASS
2000.8 VLAN: Add point intents between h5 and h21 Install and test single point to multi point intents - PASS 2000.9 1HOP
3000.3 IPV4_2: Add single point intents between h1 and h3 to multi point intents - PASS
2000 3000.10 4 VLAN: Add single point to multi point intents using VLAN Encapsulation - FAIL

Assertion Result for VLAN Encapsulation Point IntentInstall Intent State Passed
Encapsulation intents check Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Ping Failed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Pingall Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

- PASS
3000.5 VLAN: Add single point to multi point intents 2000.11 BANDWIDTH ALLOCATION: Checking bandwidth allocation for point intents between h1 and h9 - PASS

Case

...

4000: Multi To Single

...

Point Intents Test - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

3000 4000.1 NOOPTION: Install and test single Add multi point to multi single point intents - PASS 3000
4000.2 IPV4: Install and test single Add multi point to multi single point intents - PASS
3000 4000.3 IPV4_2: Add single multi point to multi single point intents - PASS
3000 4000.4 VLAN: Add single multi point to multi single point intents - PASS 3000
4000.5 VLAN: Add multi point to single point to multi intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case

...

5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives

...

- FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Isolation link Down Intent State Passed
Isolation link Down Flow State Passed
Isolation link Down Topology State Failed
Isolation link Down Connectivity Check Passed
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents PassedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed

This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet and compile intents using Flow Objectives

4000.1 NOOPTION: Add multi point to single point intents - PASS
4000.2 IPV4: Add multi point to single point intents - PASS
4000.3 IPV4_2: Add multi point to single point intents - PASS
4000.4 VLAN: Add multi point to single point intents - PASS
4000.5 VLAN: Add multi point to single point intents - PASS
4000.6 ENCAPSULATION: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.3 - Using Flow Objectives - PASS

5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.3 - Using Flow Objectives - FAIL

6000.1 Installing Multi to Single Point intents with no options set - FAIL

Assertion results for IPV4 multi to single point intent end point failure with no options setwith partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down PassedIsolation
Partial failure isolation link Down Intent State Passed
Isolation Partial failure isolation link Down Flow State Passed
Isolation Partial failure isolation link Down Topology State Failed
Isolation Partial failure isolation link Down Connectivity Check PassedIsolation
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State PassedFailed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received PassedRecieved Failed
Remove Intents PassedAfter FailedAfter removing intents Flow State Passed

6000.2 Installing Multi to Single Point intents with partial failure allowed 3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi to single with partial failures allowedpoint intent with no options set
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation Isolation link Down Intent State PassedPartial failure isolation
Isolation link Down Flow State Passed
Partial failure isolation Isolation link Down Topology State Failed
Partial failure isolation Isolation link Down Connectivity Check PassedPartial failure isolation
Isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State FailedPassed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Recieved FailedReceived Passed
Remove Intents FailedAfter removing intents Flow State Passed

6000.3 NOOPTION: Install and test single point to multi point intents - FAIL

Assertion results for IPV4 single to multi point intent with no options set
After removing intents Flow State Passed

6000.4 NOOPTION: Install and test single point to multi point intents with partial failures allowed - FAIL

Assertion results for IPV4 single to multi point intent with partial failures allowed
Install Intent State Passed
Flow duration check Passed
Initial Intent State Passed
Initial Flow State Passed
Initial Connectivity Check Passed
Link Down Passed
Link Down Passed
Link Down Intent State Passed
Link Down Flow State Passed
Link Down Topology State Passed
Link Down Connectivity Check Passed
Isolation link Down Passed
Partial failure isolation link Down Intent State Passed
Partial failure isolation link Down Flow State Passed
Partial failure isolation link Down Topology State Failed
Partial failure isolation link Down Connectivity Check Passed
Partial failure isolation link Down Connectivity Check Passed
Link Up Passed
Link Up Passed
Link Up Passed
Link Up Intent State Passed
Link Up Flow State Passed
Link Up Topology State Passed
Link Up Scapy Packet Received Passed
Remove Intents FailedAfter removing intents Flow State Passed

...

Page tree

Page History

Versions Compared

Old Version 54

New Version 55

Key

Case 1: Pull onos branch and build onos on Teststation. - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules -

FAIL

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules -

FAIL

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case

3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case

5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case 19: Copy karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 5000: Test host mobility with host intents - 1 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 6000: Test Multi to Single End Point Failure - 1 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Case 13: Create scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

Case 16: Balance mastership of switches - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Rules - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow

Rules - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 5000: Test host mobility with host intents - 3 NODE(S) - OF 1.0 - Using Flow Objectives - PASS

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Objectives - FAIL

Case 6000: Test Multi to Single End Point Failure - 3 NODE(S) - OF 1.0 - Using Flow Rules - FAIL

Case 18: Stop Mininet and Scapy - PASS

Case 19: Copy karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS