Page History

...

commit 950310c913797c859cd4fad23cfa0ab8057ef39c 3ea539086a089374ffd66041ef5dad4b89f24b39 (HEAD, origin/master, origin/HEAD, master)
Author: Andrea Campanella [andrea@onlab.usMichele Santuari [michele.santuari@create-net.org]
AuthorDate: Fri Mon Feb 12 1815 11:1421:38 56 2016 -0800+0100
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Wed Feb 17 0116:5603:55 43 2016 +0000

fix egress packet treatment ONOS-3929 Netconf Device Factory3467

Case 1: Constructing test variables and building ONOS package - PASS

...

• 16.1 Stopping and Removing Scapy Host Components - PASS
• 16.2 Stopping Mininet Topology - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Start Mininet topology with OF 1.0 switches - PASS

Start mininet topology with OF 1.0 switches to test intents, exits out if topology did not start correctly

• 10.1 Starting Mininet topology with OF 1.0 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.0 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.0 - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
• Assertion Result for dualstack IPV4 with MAC addresses
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS
• 1000.7 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.0 - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.0 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• Assertion Result for NOOPTION point intent
• 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 point intent
• 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL
• Assertion Result for Dualstack1 IPV4 with mac address point intents
• 2000.7 VLAN: Add point intents between h5 and h21 - FAIL
• Assertion Result for VLAN IPV4 with mac address point intents
• 2000.8 1HOP: Add point intents between h1 and h3 - FAIL
• Assertion Result for 1HOP IPV4 with no mac address point intents

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 16: Stop Mininet and Scapy - FAIL

Stopping the current mininet topology to start up fresh

• 16.1 Stopping and Removing Scapy Host Components - PASS
• 16.2 Stopping Mininet Topology - FAIL
• Failed to stop mininet

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS
• 1000.7 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
• 2000.2 IPV4: Add point intents between h1 and h9 - PASS
• 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h21 - PASS
• 2000.8 1HOP: Add point intents between h1 and h3 - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - PASS

Case 16: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

• 16.1 Stopping and Removing Scapy Host Components - PASS
• 16.2 Stopping Mininet Topology - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Uninstalling ONOS package - PASS
• 2.2 Apply cell to environment - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Create scapy components - PASS

• 13.1 Create scapy components - No Result
• 13.2 Start scapy components - PASS

Case 15: Discover all hosts using scapy - PASS

• 15.1 Send packets from each host to the first host and confirm onos discovery - PASS
• 15.2 Populate hostsData - PASS

Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 - FAIL

This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 1000.1 IPV4: Add and test host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
• Assertion Result for dualstack IPV4 with MAC addresses
• 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL
• Assertion Result for dualstack2 host intent
• 1000.4 1HOP: Add host intents between h1 and h3 - PASS
• 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
• 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS
• 1000.7 Confirm that ONOS leadership is unchanged - PASS

Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - FAIL

This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9 - FAIL
• Assertion Result for NOOPTION point intent
• 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 point intent
• 2000.3 IPV4_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV4 no mac address point intents
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-TCP IPV4 using ICMP point intents
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL
• Assertion Result for Dualstack1 IPV4 with mac address point intents
• 2000.7 VLAN: Add point intents between h5 and h21 - FAIL
• Assertion Result for VLAN IPV4 with mac address point intents
• 2000.8 1HOP: Add point intents between h1 and h3 - FAIL
• Assertion Result for 1HOP IPV4 with no mac address point intents

Case 5000: Test host mobility with host intents - FAIL

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV4: Add host intents between h1 and h9 - FAIL
• Assert result for IPV4 host intent between h1, moved, and h9

Case 16: Stop Mininet and Scapy - FAIL

Stopping the current mininet topology to start up fresh

• 16.1 Stopping and Removing Scapy Host Components - PASS
• 16.2 Stopping Mininet Topology - FAIL
Failed to stop mininet