Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
Test Results - Segment Routing
For test details, check out the test plans for Segment Routing on the CORD wiki.
| Page Tree | ||
|---|---|---|
|
...
Case 1: Constructing test variables and building ONOS - PASS
- 1.1 Constructing test variables - PASS
Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
- 2.1 Create and Apply cell file - PASS
- 2.2 Create and Install ONOS package - PASS
- 2.3 Starting ONOS service - PASS
- 2.4 Checking if ONOS CLI is ready - PASS
Case 3: Start Leaf-Spine 2x2 Mininet Topology - PASS
- 3.1 Starting Mininet Topology - PASS
- 3.2 Check whether the flow count is bigger than 80 - PASS
- 3.3 Check whether all flow status are ADDED - PASS
Case 4: Check full connectivity - PASS
- 4.1 Check full connectivity - PASS
Case 10: Logging test for 2x2 - PASS
Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow - PASS
- 2.1 Create and Apply cell file - PASS
- 2.2 Create and Install ONOS package - PASS
- 2.3 Starting ONOS service - PASS
- 2.4 Checking if ONOS CLI is ready - PASS
Case 3: Start Leaf-Spine 2x2 Mininet Topology - PASS
- 3.1 Starting Mininet Topology - PASS
- 3.2 Check whether the flow count is bigger than 80 - PASS
- 3.3 Check whether all flow status are ADDED - PASS
Case 4: Check full connectivity - FAIL
- 4.1 Check full connectivity - FAIL
- Full connectivity failed
Case 10: Logging test for 2x2 - PASS
Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
- 2.1 Create and Apply cell file - PASS
- 2.2 Create and Install ONOS package - PASS
- 2.3 Starting ONOS service - PASS
- 2.4 Checking if ONOS CLI is ready - PASS
Case 3: Start Leaf-Spine 4x4 Mininet Topology - PASS
- 3.1 Starting Mininet Topology - PASS
- 3.2 Check whether the flow count is bigger than 80 - PASS
- 3.3 Check whether all flow status are ADDED - PASS
Case 4: Check full connectivity - PASS
- 4.1 Check full connectivity - PASS
Case 10: Logging test for 4x4 - PASS
Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow - PASS
- 2.1 Create and Apply cell file - PASS
- 2.2 Create and Install ONOS package - PASS
- 2.3 Starting ONOS service - PASS
- 2.4 Checking if ONOS CLI is ready - PASS
Case 3: Start Leaf-Spine 4x4 Mininet Topology - PASS
- 3.1 Starting Mininet Topology - PASS
- 3.2 Check whether the flow count is bigger than 80 - PASS
- 3.3 Check whether all flow status are ADDED - PASS
Case 4: Check full connectivity - FAIL
- 4.1 Check full connectivity - FAIL
- Full connectivity failed
...