Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
Test Results - Segment Routing
For test details, check out the test plans for Segment Routing on the CORD wiki.
| Page Tree | ||
|---|---|---|
|
...
Case 1: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
- 1.1 Constructing test variables - PASS
- 1.2 Create and Apply cell file - PASS
- 1.3 Create and Install ONOS package - PASS
- 1.4 Starting ONOS service - PASS
- 1.5 Checking if ONOS CLI is ready - PASS
- 1.6 Starting Mininet Topology - PASS
- 1.7 Check whether the flow count is bigger than 116 - PASS
- 1.8 Check whether all flow status are ADDED - PASS
- 1.9 Check full connectivity CASE1 - PASS
Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
- 2.1 Create and Apply cell file - PASS
- 2.2 Create and Install ONOS package - PASS
- 2.3 Starting ONOS service - PASS
- 2.4 Checking if ONOS CLI is ready - PASS
- 2.5 Starting Mininet Topology - PASS
- 2.6 Check whether the flow count is bigger than 350 - PASS
- 2.7 Check whether all flow status are ADDED - PASS
- 2.8 Check full connectivity CASE2 - PASS
Case 3: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
- 3.1 Create and Apply cell file - PASS
- 3.2 Create and Install ONOS package - PASS
- 3.3 Starting ONOS service - PASS
- 3.4 Checking if ONOS CLI is ready - PASS
- 3.5 Starting Mininet Topology - PASS
- 3.6 Check whether the flow count is bigger than 15 - PASS
- 3.7 Check whether all flow status are ADDED - PASS
- 3.8 Check full connectivity CASE3 - PASS
Case 4: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
- 4.1 Create and Apply cell file - PASS
- 4.2 Create and Install ONOS package - PASS
- 4.3 Starting ONOS service - PASS
- 4.4 Checking if ONOS CLI is ready - PASS
- 4.5 Starting Mininet Topology - PASS
- 4.6 Check whether the flow count is bigger than 116 - PASS
- 4.7 Check whether all flow status are ADDED - PASS
- 4.8 Check full connectivity CASE4 - PASS
Case 5: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
- 5.1 Create and Apply cell file - PASS
- 5.2 Create and Install ONOS package - PASS
- 5.3 Starting ONOS service - PASS
- 5.4 Checking if ONOS CLI is ready - PASS
- 5.5 Starting Mininet Topology - PASS
- 5.6 Check whether the flow count is bigger than 350 - PASS
- 5.7 Check whether all flow status are ADDED - PASS
- 5.8 Check full connectivity CASE5 - PASS
Case 6: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
...