...
- 6000.1 Installing Multi to Single Point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with no options set
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.2 IPV4: Add multi point to single point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with IPV4 type and MAC addresses
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State PassedFailed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check PassedFailed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.3 IPV4_2: Add multi point to single point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with IPV4 type and no MAC addresses
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.4 VLAN: Add multi point to single point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with IPV4 type and no MAC addresses in the same VLAN
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check PassedFailed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.5 NOOPTION: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent end point failure with no options set
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.6 IPV4: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent end point failure with IPV4 type and no MAC addresses
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.7 IPV4_2: Add single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent endpoint failure with IPV4 type and no MAC addresses
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State FailedPassed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.8 VLAN: Add single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent endpoint failure with IPV4 type and MAC addresses in the same VLAN
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
...
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 3 NODE(S) - OF 1.3 -
...
PASS
This test case tests Host intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 1000.1 IPV4: Add host intents between h1 and h9 - FAIL
- Assertion Result for IPV4 host intent with mac addresses
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Failed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Failed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
- Assertion Result for dualstack IPV4 with MAC addresses
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Failed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Failed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - FAIL
- Assertion Result for dualstack2 host intent
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Failed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Failed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.4 1HOP: Add host intents between h1 and h3 - FAIL
- Assertion Result for 1HOP for IPV4 same switch
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Failed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Failed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - FAIL
- Assertion Result vlan IPV4
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Failed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Failed
- Link Up Pingall Passed
- Remove Intents Passed
- 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - FAIL
- Assertion Result different VLAN negative test
- 1000.7 Confirm that ONOS leadership is unchanged - FAIL
- ONOS Leader Mismatch
...
- PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 DUALSTACK2: Add host intents between h1 and h11 - PASS
- 1000.4 1HOP: Add host intents between h1 and h3 - PASS
- 1000.5 VLAN1: Add vlan host intents between h4 and h12 - PASS
- 1000.6 VLAN2: Add inter vlan host intents between h13 and h20 - PASS
- 1000.7 Confirm that ONOS leadership is unchanged - PASS
Case 2000: Point Intents Test - 3 NODE(S) - OF 1.3 - FAIL
This test case will test point to point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 2000.1 NOOPTION: Add point intents between h1 and h9 - PASS
- 2000.2 IPV4: Add point intents between h1 and h9 - PASS
- 2000.3 IPV4_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
- Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h21 - PASS
- 2000.8 1HOP: Add point intents between h1 and h3 - PASS
Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 -
...
PASS
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 2000 3000.1 NOOPTION: Add Install and test single point to multi point intents between h1 and h9 - FAIL
- Assertion Result for NOOPTION point intent
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Failed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Failed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.2 IPV4: Add point intents between h1 and h9 - FAIL
- Assertion Result for IPV4 point intent
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Failed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Failed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- - PASS
- 3000.2 IPV4: Install and test single point to multi point intents - PASS
- 3000.3 IPV4_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - PASS
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 4000.1 NOOPTION: Add multi point to single point intents - PASS
- 4000.2 IPV4: Add multi point to single point intents - PASS
- 4000 2000.3 IPV4_2: Add multi point to single point intents between h1 and h9 - FAIL - PASS
- 4000.4 VLAN: Add multi point to single point intents - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - PASS
Case 6000: Test Multi to Single End Point Failure - FAIL
- 6000.1 Installing Multi to Single Point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with no options set
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up
- Assertion Result for IPV4 no mac address point intents
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Failed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Failed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
- Assertion Result for SDNIP-ICMP IPV4 using TCP point intents
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL
- Assertion Result for Dualstack1 IPV4 with mac address point intents
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Failed
- Link Down Pingall Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State FailedPassed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 2000 6000.7 VLAN2 IPV4: Add multi point intents between h5 and h21 to single point intents - FAIL
- Assertion Result results for VLAN IPV4 with mac address point intents
- 2000.8 1HOP: Add point intents between h1 and h3 - FAIL
- IPV4 multi to single point intent end point failure with IPV4 type and MAC addresses
- Assertion Result for 1HOP IPV4 with no mac address point intents
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State FailedPassed
- Link Down Pingall Connectivity Check PassedLink Up
- Isolation link Down Passed
- Link Up Isolation link Down Intent State PassedLink Up Failed
- Isolation link Down Flow State Passed
- Link Up Isolation link Down Topology State FailedPassed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Link Up Scapy Packet Received Passed
- Remove Intents Failed
Case 3000: Single to Multi Point Intents Test - 3 NODE(S) - OF 1.3 - FAIL
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 3000.1 NOOPTION: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent with no options set
- 3000.2 IPV4: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses
- 3000.3 IPV4_2: Add single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent with IPV4 type and no MAC addresses
- 3000.4 VLAN: Add single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent with IPV4 type and MAC addresses in the same VLAN
Case 4000: Multi To Single Point Intents Test - 3 NODE(S) - OF 1.3 - FAIL
This test case will test single point to multi point intents using 3 node(s) cluster; Different type of hosts will be tested in each step such as IPV4, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- Passed
- 6000.3 IPV4_2: Add multi point to single point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with IPV4 type and no MAC addresses
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.4 VLAN: Add multi point to single point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with IPV4 type and no MAC addresses in the same VLAN
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.5 NOOPTION: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent end point failure with no options set
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.6 IPV4: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent end point failure with IPV4 type and no MAC addresses
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.7 IPV4_2: Add single point to multi
- 4000.1 NOOPTION: Add multi point to single point intents - FAIL
- Assertion results for NOOPTION multi to single point intent
- 4000.2 IPV4: Add multi point to single point intents - FAIL
- Assertion results for IPV4 multi to single point intent with IPV4 type and MAC addresses
- 4000.3 IPV4_2: Add multi point to single point intents - FAIL
- Assertion results for IPV4 multi to single point intent with IPV4 type and no MAC addresses
- 4000.4 VLAN: Add multi point to single point intents - FAIL
- Assertion results for IPV4 single to multi to single point intent endpoint failure with IPV4 type and no MAC addresses in the same VLAN
Case 5000: Test host mobility with host intents - FAIL
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV4: Add host intents between h1 and h9 - FAIL
- Assert result for IPV4 host intent between h1, moved, and h9
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Ping Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State FailedPassed
- Link Down Pingall Connectivity Check PassedLink Up
- Isolation link Down Passed
- Link Up Isolation link Down Intent State PassedLink Up Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Link Up Topology State Failed
- Link Up Pingall Passed
- Remove Intents Passed
Case 6000: Test Multi to Single End Point Failure - FAIL
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed
- 6000.8 VLAN: Add single point to multi
- 6000.1 Installing Multi to Single Point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with no options set
- 6000.2 IPV4: Add multi point to single point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with IPV4 type and MAC addresses
- 6000.3 IPV4_2: Add multi point to single point intents - FAIL
- Assertion results for IPV4 multi to single point intent end point failure with IPV4 type and no MAC addresses
- 6000.4 VLAN: Add multi point to single point intents - FAIL
- Assertion results for IPV4 single to multi to single point intent end point failure with IPV4 type and no MAC addresses in the same VLAN
- 6000.5 NOOPTION: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent end point failure with no options set
- 6000.6 IPV4: Install and test single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent end point failure with IPV4 type and no MAC addresses
- 6000.7 IPV4_2: Add single point to multi point intents - FAIL
- Assertion results for IPV4 single to multi point intent endpoint failure with IPV4 type and no MAC addresses
- 6000.8 VLAN: Add single point to multi point intents - FAIL
- endpoint failure with IPV4 type and MAC addresses in the same VLAN
- Initial Intent State Passed
- Initial Flow State Passed
- Initial Connectivity Check Passed
- Link Down Passed
- Link Down Passed
- Link Down Intent State Passed
- Link Down Flow State Passed
- Link Down Topology State Passed
- Link Down Connectivity Check Passed
- Isolation link Down Passed
- Isolation link Down Intent State Failed
- Isolation link Down Flow State Passed
- Isolation link Down Topology State Passed
- Isolation link Down Connectivity Check Passed
- Isolation link Down Connectivity Check Failed
- Link Up Passed
- Link Up Passed
- Link Up Passed
- Link Up Intent State Passed
- Link Up Flow State Passed
- Link Up Topology State Passed
- Link Up Scapy Packet Received Passed
- Remove Intents Passed Assertion results for IPV4 single to multi point intent endpoint failure with IPV4 type and MAC addresses in the same VLAN
Case 17: Stop Mininet and Scapy - PASS
...