Page History

...

commit 8aec1a16be9add093fe950c8a46dce1d7aa0c329 0f6677d8b3525e944f59d910e8bd14d85f7c076b (HEAD, origin/master, origin/HEAD, master)
Author: Brian O'Connor [bocon@onlab.us]
AuthorDate: Wed Apr 6 1423:1026:43 51 2016 -0700
Commit: Brian O'Connor [bocon@onlabThomas Vachuska [tom@onlab.us]
CommitDate: Wed Fri Apr 6 148 02:1224:24 02 2016 -0700
Updating OSGiWrapper to use Builder+0000

Buckifying DHCP app

Case 1: Constructing test variables and building ONOS package - PASS

...

• 1.1 Constructing test variables - PASS

Case 2: Starting up 7 node(s) ONOS cluster -

...

FAIL

Set up ONOS with 7 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS FAIL
• Failed to install ONOS package
• 2.5 Starting ONOS service - PASS

Case 20: Add Network configurations to the cluster - PASS

Add Network Configurations for devices not discovered yet. One device is allowed, the other disallowed.

• 20.1 Add Net Cfg for switch1 - PASS
• 20.2 Add Net Cfg for switch3 - PASS
• 20.3 Check net config - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 21: Check Devices After they initially connect to ONOS - PASS

• 21.1 Check net config - PASS
• 21.2 ONOS should only show devices S1, S2, and S4 - PASS
• 21.3 Check device annotations - PASS

Case 22: Add Network configurations for connected devices to the cluster - PASS

Add Network Configurations for discovered devices. One device is allowed, the other disallowed.

• 22.1 Add Net Cfg for switch2 - PASS
• 22.2 Add Net Cfg for switch4 - PASS
• 22.3 Check net config - PASS

Case 23: Check Devices after all configurations are set - PASS

• 23.1 Check net config - PASS
• 23.2 ONOS should only show devices S1 and S2 - PASS
• 23.3 Check device annotations - PASS

Case 24: Testing removal of configurations - PASS

• FAIL
• ONOS service did not start properly
• 24.1 Remove 'allowed' configuration from all devices - PASS
• 24.2 Check net config - PASS
• 24.3 Delete basic config for s1 and s2 - PASS
• 24.4 Check net config - PASS
• 24.5 Delete the net config for S3 - PASS
• 24.6 Check net config - PASS
• 24.7 Delete the net config for all devices - PASS
• 24.8 Check net config - PASS
24.9 Assert the net config for devices is empty - PASS