Page History

...

commit 65b38cb6c0fa8ab371f9b9a7c8878e94f98a12d2 5be3e820cfeedd763b874e6581161f7e1a0e4850 (HEAD, origin/master, origin/HEAD, master)
Author: Hyunsun Moon [hyunsun.moon@gmailHIGUCHI Yuta [y-higuchi@ak.jp.nec.com]
AuthorDate: Fri Tue May 6 183 13:2751:37 42 2016 -0700
Commit: Hyunsun Moon [hyunsun.moon@gmail.comYuta HIGUCHI [y-higuchi@onlab.us]
CommitDate: Fri Mon May 6 189 23:2939:27 00 2016 -0700
Fixed consistent map event listener remove+0000

ONOS-4417 Remove OtuPort out of core.

<iframe src="https://onos-jenkins.onlab.us/job/HAclusterRestart/plot/Plot-HA/getPlot?index=2&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe>

...

• 2.1 Assign switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS FAIL
• ONOS shows 0 SCCs
• 8.7 Device information is correct - PASS FAIL
• Device information is incorrect
• 8.8 Links are correct - PASS FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

...

• 3.1 Install reactive forwarding app - PASS
• 3.2 Check app ids - PASS
• 3.3 Discovering Hosts( Via pingall for now ) - PASS ) - FAIL
• Reactive Pingall failed, one or more ping pairs failed
• 3.4 Uninstall reactive forwarding app - PASS
• 3.5 Check app ids - PASS
• 3.6 Add host intents via cli - PASS FAIL
• Error looking up host ids
• 3.7 Intent Anti-Entropy dispersion - FAIL PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS FAIL
• ONOS shows 0 SCCs
• 8.7 Device information is correct - PASS FAIL
• Device information is incorrect
• 8.8 Links are correct - FAIL
• Links are
correct - PASS
• incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS FAIL
• Intents have not been installed correctly, pings failed.

Case 5: Setting up and gathering data for current state -

...

FAIL

• 5.1 Check that each switch has a master - PASS
• 5.2 Get the Mastership of each switch from each controller - PASS
• 5.3 Check for consistency in roles from each controller - PASS
• 5.4 Get the intents from each controller - PASS
• 5.5 Check for consistency in Intents from each controller - PASS
• 5.6 Get the flows from each controller - PASS
• 5.7 Check for consistency in Flows from each controller - PASS
• 5.8 Get the OF Table entries - No Result
• 5.9 Start continuous pings - No Result
• 5.10 Collecting topology information from ONOS - No Result
• 5.11 Host view is consistent across ONOS nodes - PASS FAIL
• ONOS nodes have different views of hosts
• 5.12 Each host has an IP address - PASS
• 5.13 Cluster view is consistent across ONOS nodes - PASS
• 5.14 Cluster view correct across ONOS nodes - PASS FAIL
• ONOS shows 0 SCCs
• 5.15 Comparing ONOS topology to MN - PASS FAIL
• ONOS7 hosts don't match Mininet
• 5.16 Device information is correct - PASS FAIL
• Device information is incorrect
• 5.17 Links are correct - PASS FAIL
• Links are incorrect
• 5.18 Hosts are correct - PASS FAIL
• Hosts are incorrect

Case 14: Start Leadership Election app - PASS

...

• 6.1 Checking ONOS Logs for errors - No Result
• 6.2 Killing ONOS nodes - PASS
• 6.3 Checking if ONOS is up yet - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS FAIL
• ONOS shows 0 SCCs
• 8.7 Device information is correct - PASS FAIL
• Device information is incorrect
• 8.8 Links are correct - PASS FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

...

• 3.1 Install reactive forwarding app - PASS
• 3.2 Check app ids - PASS
• 3.3 Discovering Hosts( Via pingall for now ) - PASS FAIL
• Reactive Pingall failed, one or more ping pairs failed
• 3.4 Uninstall reactive forwarding app - PASS
• 3.5 Check app ids - PASS
• 3.6 Add host intents via cli - PASS FAIL
• Error looking up host ids
• 3.7 Intent Anti-Entropy dispersion - FAIL PASS

Case 7: Running ONOS Constant State Tests - FAIL

...

• 7.1 Check that each switch has a master - PASS
• 7.2 Read device roles from ONOS - PASS
• 7.3 Check for consistency in roles from each controller - FAIL
ONOS nodes have different views of switch roles
• consistency in roles from each controller - PASS
• 7.4 Get the intents and compare across all nodes - PASS
• 7.5 Check for consistency in Intents from each controller - PASS
• 7.6 Get the OF Table entries and compare to before component failure - FAIL
• Changes were found in the flow tables
• 7.7 Leadership Election is still functional - FAIL
Something went wrong with Leadership election
• PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.3 Check leadership of topics - PASS 4.4 Wait a minute then ping again - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.

Case 15: Check that Leadership Election is still functional -

...

PASS

• 15.1 Run for election on each node - PASS
• 15.2 Check that each node shows the same leader and candidates - FAIL
Nodes have different leaderboards
• PASS
• 15.3 Find current leader and withdraw - FAIL
Node was not withdrawn from election
• PASS
• 15.4 Check that a new node was elected leader - FAIL
Something went wrong with Leadership election
• PASS
• 15.5 Check that that new leader was the candidate of old leader - FAIL
Incorrect Candidate Elected
• PASS
• 15.6 Run for election on old leader( just so everyone is in the hat ) - FAIL
App failed to run for election
• ) - PASS
• 15.7 Check that oldLeader is a candidate, and leader if only 1 node - FAIL
Something went wrong with Leadership election after the old leader re-ran for election
• PASS

Case 17: Check for basic functionality with distributed primitives - PASS

...

• 9.1 Kill Link between s3 and s28 - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS FAIL
• ONOS shows 0 SCCs
• 8.7 Device information is correct - PASS FAIL
• Device information is incorrect
• 8.8 Links are correct - PASS FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS FAIL
• Intents have not been installed correctly, pings failed.

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

...

• 10.1 Bring link between s3 and s28 back up - PASS

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS - FAIL
• ONOS shows 0 SCCs
• 8.7 Device information is correct - PASS FAIL
• Device information is incorrect
• 8.8 Links are correct - PASS FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.3 Check leadership of topics - PASS 4.4 Wait a minute then ping again - PASS
• 4.4 Wait a minute then ping again - FAIL
• Intents have not been installed correctly, pings failed.

Case 11: Killing a switch to ensure it is discovered correctly -

...

FAIL

• 11.1 Kill s5 - PASS FAIL
• Failed to kill switch?

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS FAIL
• ONOS shows 0 SCCs
• 8.7 Device information is correct - PASS FAIL
• Device information is incorrect
• 8.8 Links are correct - PASS FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS FAIL
• Intents have not been installed correctly, pings failed.

Case 12: Adding a switch to ensure it is discovered correctly -

...

FAIL

• 12.1 Add back s5 - PASS FAIL
• Failed to add switch?

Case 8: Compare ONOS Topology view to Mininet topology -

...

FAIL

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS FAIL
• ONOS shows 0 SCCs
• 8.7 Device information is correct - PASS FAIL
• Device information is incorrect
• 8.8 Links are correct - PASS FAIL
• Links are incorrect
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents -

...

FAIL

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS FAIL
• Intents have not been installed correctly, pings failed.
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS FAIL
• Intents have not been installed correctly, pings failed.

Case 13: Test Cleanup - PASS

...