Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 33 Next »

SCPFscaleTopo at 23 Jul 2016 23:03:11

Case 1: Constructing test variables - PASS

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Starting up Mininet and verifying topology - PASS

Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS

  • 10.1 Starting up TORUS 10x10 topology - PASS (tick)

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 10x10 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - FAIL (error)
    • ONOS3 Topology doesn't match Mininet

Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 10x10 - PASS

Balance masters to make sure each controller has some devices and stop ONOS node 3 service.

  • 100.1 Bringing down node 3 - PASS (tick)

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 10x10 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - FAIL (error)
    • ONOS2 Topology doesn't match Mininet

Case 200: Bring ONOS node 3 up and balance masters: TORUS 10x10 - PASS

Bring node 3 back up and balance the masters

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 10x10 - PASS

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - PASS (tick)

Case 1000: Checking logs for errors, warnings, and exceptions - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Starting up Mininet and verifying topology - PASS

Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS

  • 10.1 Starting up TORUS 15x15 topology - PASS (tick)

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 15x15 - PASS

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - PASS (tick)

Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 15x15 - PASS

Balance masters to make sure each controller has some devices and stop ONOS node 3 service.

  • 100.1 Bringing down node 3 - PASS (tick)

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 15x15 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - FAIL (error)
    • ONOS2 Topology doesn't match Mininet

Case 200: Bring ONOS node 3 up and balance masters: TORUS 15x15 - PASS

Bring node 3 back up and balance the masters

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 15x15 - PASS

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - PASS (tick)

Case 1000: Checking logs for errors, warnings, and exceptions - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Starting up Mininet and verifying topology - PASS

Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS

  • 10.1 Starting up TORUS 20x20 topology - PASS (tick)

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 20x20 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - FAIL (error)
    • ONOS3 Topology doesn't match Mininet

Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 20x20 - PASS

Balance masters to make sure each controller has some devices and stop ONOS node 3 service.

  • 100.1 Bringing down node 3 - PASS (tick)

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 20x20 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - FAIL (error)
    • ONOS2 Topology doesn't match Mininet

Case 200: Bring ONOS node 3 up and balance masters: TORUS 20x20 - PASS

Bring node 3 back up and balance the masters

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 20x20 - FAIL

  • No labels