FUNCipv6Intent at 28 Sep 2017 19:42:28
commit 0c484a7072f54189210033a4bc9d63d230c34618 (HEAD, origin/master, origin/HEAD, master)
Author: Ray Milkey [ray@opennetworking.org]
AuthorDate: Wed Sep 27 17:25:45 2017 -0700
Commit: Thomas Vachuska [tom@opennetworking.org]
CommitDate: Thu Sep 28 17:10:33 2017 +0000
Constructor is needed by the serializer
Case 1: Pull onos branch and build onos on Teststation. - PASS
For loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Uninstalling ONOS package - PASS
- 2.3 Creating ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up ONOS secure SSH - PASS
- 2.6 Checking ONOS service - PASS
- 2.7 Starting ONOS CLI sessions - PASS
- 2.8 Checking that ONOS is ready - PASS
- 2.9 setup the ipv6NeighbourDiscovery - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Discover all hosts - PASS
- 13.1 Discover all hosts using pingall - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - FAIL
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 1000.1 IPV6: Add host intents between h1 and h9 - FAIL
- IPV6: Host intent test failed between two IPV6 hosts
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
- DUALSTACK: Host intent test failed between twodual stack host using IPV6
- 1000.3 1HOP: Add host intents between h1 and h3 - FAIL
- 1HOP: Host intent test failed between twohost using IPV6 in the same switch
- 1000.4 VLAN: Add vlan host intents between h5 and h24 - FAIL
- VLAN1: Host intent test failed between twohost using IPV6 in the same VLAN