Master-FUNCipv6Intent

FUNCipv6Intent at 14 May 2018 19:41:46

FUNCipv6Intent

commit f5d5782ecf67530476f3e3d312569d6669c98a95 (HEAD -] master, origin/master, origin/HEAD)
Author: Jonghwan Hyun [jonghwan@opennetworking.org]
AuthorDate: Wed May 9 10:19:50 2018 -0700
Commit: Carmelo Cascone [carmelo@opennetworking.org]
CommitDate: Tue May 15 00:27:42 2018 +0000

[ONOS-7654] Fix int.p4 to correctly specify src/sink

Case 1: Pull onos branch and build onos on Teststation. - PASS

For loading from params file, and pull and build the latest ONOS package

1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling ONOS package - PASS
2.3 Creating ONOS package - PASS
2.4 Installing ONOS package - PASS
2.5 Set up ONOS secure SSH - PASS
2.6 Checking ONOS service - PASS
2.7 Starting ONOS CLI sessions - PASS
2.8 Checking that ONOS is ready - PASS
2.9 setup the ipv6NeighbourDiscovery - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

13.1 Discover all hosts using pingall - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

1000.1 IPV6: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 1HOP: Add host intents between h1 and h3 - PASS
1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS
2000.2 IPV6: Add point intents between h1 and h9 - PASS
2000.3 IPV6_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h24 - PASS
2000.8 1HOP: Add point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

3000.1 NOOPTION: Add single point to multi point intents - PASS
3000.2 IPV6: Add single point to multi point intents - PASS
3000.3 IPV6_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - PASS