Master-FUNCipv6Intent

FUNCipv6Intent at 22 Nov 2018 19:32:03

FUNCipv6Intent

commit 926e6bdcf3a4a5494348a02244c03c44c428ee34 (HEAD -] master, origin/master, origin/HEAD)
Author: Ray Milkey [ray@opennetworking.org]
AuthorDate: Wed Nov 21 16:35:55 2018 -0800
Commit: Ray Milkey [ray@opennetworking.org]
CommitDate: Wed Nov 21 16:35:55 2018 -0800

Fix sonar scanning problems

Case 1: Pull onos branch and build onos on Teststation. - PASS

For loading from params file, and pull and build the latest ONOS package

1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - FAIL

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling Atomix - PASS
2.3 Uninstalling ONOS package - PASS
2.4 Creating ONOS package - PASS
2.5 Installing Atomix - PASS
2.6 Installing ONOS package - PASS
2.7 Set up ONOS secure SSH - PASS
2.8 Checking ONOS service - PASS
2.9 Starting ONOS CLI sessions - PASS
2.10 Checking ONOS nodes - PASS
2.11 Checking ONOS applications - PASS
2.12 Checking that ONOS is ready - PASS
2.13 setup the ipv6NeighbourDiscovery - FAIL

Failed to cfg set ipv6NeighborDiscovery

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

13.1 Discover all hosts using pingall - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

1000.1 IPV6: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 1HOP: Add host intents between h1 and h3 - PASS
1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS
2000.2 IPV6: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV6 point intent
Initial Intent State Failed
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Passed
Link Down Intent State Failed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Passed
Link Up Intent State Failed
Remove Intents Failed

2000.3 IPV6_2: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV6 no mac address point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV6 using ICMP point intents
Initial Intent State Failed
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV6 using TCP point intents
Initial Intent State Failed
Initial Flow Count Passed
Initial Flow State Passed
Initial Iperf6 Passed
Remove Intents Failed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - FAIL

Assertion Result for Dualstack1 IPV6 with mac address point intents
Initial Intent State Failed
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Passed
Link Down Intent State Failed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Passed
Link Up Intent State Failed
Remove Intents Failed

2000.7 VLAN: Add point intents between h5 and h24 - FAIL

Assertion Result for VLAN IPV6 with mac address point intents
Initial Intent State Failed
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Passed
Link Down Intent State Failed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Passed
Link Up Intent State Failed
Remove Intents Failed

2000.8 1HOP: Add point intents between h1 and h9 - FAIL

Assertion Result for 1HOP IPV6 with no mac address point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

3000.1 NOOPTION: Add single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent with no options set
Initial Intent State Failed
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Passed
Link Down Intent State Failed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Passed
Link Up Intent State Failed
Remove Intents Failed

3000.2 IPV6: Add single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent with IPV6 type and MAC addresses
Initial Intent State Failed
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

3000.3 IPV6_2: Add single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent with IPV6 type and no MAC addresses
Initial Intent State Failed
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

3000.4 VLAN: Add single point to multi point intents - FAIL

Assertion results for IPV6 single to multi point intent with IPV6 type and MAC addresses in the same VLAN
Initial Intent State Failed
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Passed
Remove Intents Failed

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL