Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 73 Next »

USECASE_SegmentRouting at 23 May 2016 02:44:27

Case 1: Constructing test variables and building ONOS - PASS

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

  • 2.1 Create and Apply cell file - PASS (tick)
  • 2.2 Create and Install ONOS package - PASS (tick)
  • 2.3 Starting ONOS service - PASS (tick)
  • 2.4 Checking if ONOS CLI is ready - PASS (tick)

Case 3: Start Leaf-Spine 2x2 Mininet Topology - PASS

  • 3.1 Starting Mininet Topology - PASS (tick)
  • 3.2 Check whether the flow count is bigger than 80 - PASS (tick)
  • 3.3 Check whether all flow status are ADDED - PASS (tick)

Case 4: Check full connectivity - PASS

  • 4.1 1st Check full connectivity - PASS (tick)
  • 4.2 2nd Check full connectivity - PASS (tick)

Case 10: Logging test for 2x2 - PASS

Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow - PASS

  • 2.1 Create and Apply cell file - PASS (tick)
  • 2.2 Create and Install ONOS package - PASS (tick)
  • 2.3 Starting ONOS service - PASS (tick)
  • 2.4 Checking if ONOS CLI is ready - PASS (tick)

Case 3: Start Leaf-Spine 2x2 Mininet Topology - FAIL

  • 3.1 Starting Mininet Topology - PASS (tick)
  • 3.2 Check whether the flow count is bigger than 80 - FAIL (error)
    • Flow count looks wrong: False
  • 3.3 Check whether all flow status are ADDED - PASS (tick)

Case 4: Check full connectivity - FAIL

  • 4.1 1st Check full connectivity - FAIL (error)
    • Full connectivity failed
  • 4.2 2nd Check full connectivity - FAIL (error)
    • Full connectivity failed

Case 10: Logging test for 2x2 - PASS

Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

  • 2.1 Create and Apply cell file - PASS (tick)
  • 2.2 Create and Install ONOS package - PASS (tick)
  • 2.3 Starting ONOS service - PASS (tick)
  • 2.4 Checking if ONOS CLI is ready - PASS (tick)

Case 3: Start Leaf-Spine 4x4 Mininet Topology - PASS

  • 3.1 Starting Mininet Topology - PASS (tick)
  • 3.2 Check whether the flow count is bigger than 80 - PASS (tick)
  • 3.3 Check whether all flow status are ADDED - PASS (tick)

Case 4: Check full connectivity - PASS

  • 4.1 1st Check full connectivity - PASS (tick)
  • 4.2 2nd Check full connectivity - PASS (tick)

Case 10: Logging test for 4x4 - PASS

Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow - PASS

  • 2.1 Create and Apply cell file - PASS (tick)
  • 2.2 Create and Install ONOS package - PASS (tick)
  • 2.3 Starting ONOS service - PASS (tick)
  • 2.4 Checking if ONOS CLI is ready - PASS (tick)

Case 3: Start Leaf-Spine 4x4 Mininet Topology - PASS

  • 3.1 Starting Mininet Topology - PASS (tick)
  • 3.2 Check whether the flow count is bigger than 80 - PASS (tick)
  • 3.3 Check whether all flow status are ADDED - PASS (tick)

Case 4: Check full connectivity - FAIL

  • 4.1 1st Check full connectivity - FAIL (error)
    • Full connectivity failed
  • 4.2 2nd Check full connectivity - FAIL (error)
    • Full connectivity failed

Case 10: Logging test for 4x4 - PASS

  • No labels