Case 1: Constructing test variables - PASS

• 1.1 Constructing test variables - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Starting up Mininet and verifying topology - PASS

Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS

• 10.1 Starting up TORUS 10x10 topology - PASS

Case 300: - PASS

• 300.1 Balancing Masters - PASS

Case 11: Verifying topology: TORUS 10x10 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

• 11.1 Comparing MN topology to ONOS topology - FAIL
• ONOS3 Topology doesn't match Mininet

Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 10x10 - PASS

Balance masters to make sure each controller has some devices and stop ONOS node 3 service.

• 100.1 Bringing down node 3 - PASS

Case 300: - PASS

• 300.1 Balancing Masters - PASS

Case 11: Verifying topology: TORUS 10x10 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

• 11.1 Comparing MN topology to ONOS topology - FAIL
• ONOS2 Topology doesn't match Mininet

Case 200: Bring ONOS node 3 up and balance masters: TORUS 10x10 - PASS

Bring node 3 back up and balance the masters

Case 300: - PASS

• 300.1 Balancing Masters - PASS

Case 11: Verifying topology: TORUS 10x10 - PASS

Pinging all hosts and comparing topology elements between Mininet and ONOS

• 11.1 Comparing MN topology to ONOS topology - PASS

Case 1000: Checking logs for errors, warnings, and exceptions - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Starting up Mininet and verifying topology - PASS

Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS

• 10.1 Starting up TORUS 15x15 topology - PASS

Case 300: - PASS

• 300.1 Balancing Masters - PASS

Case 11: Verifying topology: TORUS 15x15 - PASS

Pinging all hosts and comparing topology elements between Mininet and ONOS

• 11.1 Comparing MN topology to ONOS topology - PASS

Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 15x15 - PASS

Balance masters to make sure each controller has some devices and stop ONOS node 3 service.

• 100.1 Bringing down node 3 - PASS

Case 300: - PASS

• 300.1 Balancing Masters - PASS

Case 11: Verifying topology: TORUS 15x15 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

• 11.1 Comparing MN topology to ONOS topology - FAIL
• ONOS2 Topology doesn't match Mininet

Case 200: Bring ONOS node 3 up and balance masters: TORUS 15x15 - PASS

Bring node 3 back up and balance the masters

Case 300: - PASS

• 300.1 Balancing Masters - PASS

Case 11: Verifying topology: TORUS 15x15 - PASS

Pinging all hosts and comparing topology elements between Mininet and ONOS

• 11.1 Comparing MN topology to ONOS topology - PASS

Case 1000: Checking logs for errors, warnings, and exceptions - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Starting up Mininet and verifying topology - PASS

Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS

• 10.1 Starting up TORUS 20x20 topology - PASS

Case 300: - PASS

• 300.1 Balancing Masters - PASS

Case 11: Verifying topology: TORUS 20x20 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

• 11.1 Comparing MN topology to ONOS topology - FAIL
• ONOS3 Topology doesn't match Mininet

Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 20x20 - PASS

Balance masters to make sure each controller has some devices and stop ONOS node 3 service.

• 100.1 Bringing down node 3 - PASS

Case 300: - PASS

• 300.1 Balancing Masters - PASS

Case 11: Verifying topology: TORUS 20x20 - FAIL

Pinging all hosts and comparing topology elements between Mininet and ONOS

• 11.1 Comparing MN topology to ONOS topology - FAIL
• ONOS2 Topology doesn't match Mininet

Case 200: Bring ONOS node 3 up and balance masters: TORUS 20x20 - PASS

Bring node 3 back up and balance the masters

Case 300: - PASS

• 300.1 Balancing Masters - PASS

Case 11: Verifying topology: TORUS 20x20 - FAIL