commit 389f10819030763a39900e23d614b5afe1d9d23b (HEAD, origin/onos-1.6, onos-1.6)
Author: Thomas Vachuska [tom@onlab.us]
AuthorDate: Wed Jun 8 17:57:28 2016 -0700
Commit: Thomas Vachuska [tom@onlab.us]
CommitDate: Wed Jun 8 17:57:28 2016 -0700

Starting snapshot 1.6.0-SNAPSHOT

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

• 1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS
• 2.7 Checking that ONOS is ready - PASS
• 2.8 setup the ipv6NeighbourDiscovery - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 1000.1 IPV6: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 1HOP: Add host intents between h1 and h3 - PASS
• 1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS