Case 1: Constructing test variables and building ONOS - PASS

• 1.1 Constructing test variables - PASS

Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

• 2.1 Create and Apply cell file - PASS
• 2.2 Create and Install ONOS package - PASS
• 2.3 Starting ONOS service - PASS
• 2.4 Checking if ONOS CLI is ready - PASS

Case 3: Start Leaf-Spine 2x2 Mininet Topology - PASS

• 3.1 Starting Mininet Topology - PASS
• 3.2 Check whether the flow count is bigger than 80 - PASS
• 3.3 Check whether all flow status are ADDED - PASS

Case 4: Check full connectivity - PASS

• 4.1 Check full connectivity1 - PASS

Case 4: Check full connectivity - PASS

• 4.1 Check full connectivity1 - PASS

Case 10: Logging test for 2x2 - PASS

Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow - PASS

• 2.1 Create and Apply cell file - PASS
• 2.2 Create and Install ONOS package - PASS
• 2.3 Starting ONOS service - PASS
• 2.4 Checking if ONOS CLI is ready - PASS

Case 3: Start Leaf-Spine 2x2 Mininet Topology - PASS

• 3.1 Starting Mininet Topology - PASS
• 3.2 Check whether the flow count is bigger than 80 - PASS
• 3.3 Check whether all flow status are ADDED - PASS

Case 4: Check full connectivity - FAIL

• 4.1 Check full connectivity1 - FAIL
• Full connectivity failed

Case 4: Check full connectivity - PASS

• 4.1 Check full connectivity1 - PASS

Case 10: Logging test for 2x2 - PASS