commit 91c7c9a706234e77f5a9235aca4ab09bc4b56f29 (HEAD, origin/onos-1.6, onos-1.6)
Author: Carmelo Cascone [carmelo@onlab.us]
AuthorDate: Fri Jun 24 15:21:38 2016 -0700
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Wed Jun 29 22:02:18 2016 +0000

Fixed stack overflow bug when using BMv2 table entry service

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

• 1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

• 10.1 Starting mininet and LINC-OE - PASS

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

• 21.1 Discover Hosts through Pingall - PASS

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

• 22.1 Send arping between all hosts - PASS

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 23.1 Comparing Mininet topology to ONOS topology - PASS

Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

• 31.1 Adding point intents - FAIL
• Failed to add point intents
• Skipping the rest of this case.

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

• 32.1 Adding host intents to h1 and h2 - FAIL
• Some of the intents are not in INSTALLED state
• 32.2 Removing host intents - FAIL
• Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

• 10.1 Starting mininet and LINC-OE - PASS

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

• 21.1 Discover Hosts through Pingall - PASS

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

• 22.1 Send arping between all hosts - PASS

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 23.1 Comparing Mininet topology to ONOS topology - PASS

Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

• 31.1 Adding point intents - FAIL
• Failed to add point intents
• Skipping the rest of this case.

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

• 32.1 Adding host intents to h1 and h2 - FAIL
• Some of the intents are not in INSTALLED state
• 32.2 Removing host intents - FAIL
• Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

• 10.1 Starting mininet and LINC-OE - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

• 21.1 Discover Hosts through Pingall - PASS

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

• 22.1 Send arping between all hosts - PASS

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 23.1 Comparing Mininet topology to ONOS topology - PASS

Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

• 31.1 Adding point intents - FAIL
• Failed to add point intents
• Skipping the rest of this case.

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

• 32.1 Adding host intents to h1 and h2 - FAIL
• Some of the intents are not in INSTALLED state
• 32.2 Removing host intents - FAIL
• Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

• 10.1 Starting mininet and LINC-OE - PASS

Case 17: Enable intent compilation using Flow Objectives - PASS

• 17.1 Enabling Flow Objectives - PASS

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

• 21.1 Discover Hosts through Pingall - PASS

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

• 22.1 Send arping between all hosts - PASS

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

• 23.1 Comparing Mininet topology to ONOS topology - PASS

Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

• 31.1 Adding point intents - FAIL
• Failed to add point intents
• Skipping the rest of this case.

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

• 32.1 Adding host intents to h1 and h2 - FAIL
• Some of the intents are not in INSTALLED state
• 32.2 Removing host intents - FAIL
• Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

• 19.1 Copying karaf logs - PASS