commit 86a54ac4d869908e14c2efbf40ecb12b13b650b9 (HEAD, origin/onos-1.6, onos-1.6)
Author: Bob Lantz [rlantz@cs.stanford.edu]
AuthorDate: Wed Jun 29 18:26:06 2016 -0700
Commit: Bob Lantz [lantz@onlab.us]
CommitDate: Thu Jun 30 21:24:03 2016 +0000

unpackONOS: check for failure when extracting tar archive
--
(cherry picked from commit a2ccaa56726b3e4f488882353b879d9e8aa50158)

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

• 1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS
• 2.7 Checking that ONOS is ready - PASS
• 2.8 setup the ipv6NeighbourDiscovery - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 1000.1 IPV6: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 1HOP: Add host intents between h1 and h3 - PASS
• 1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS
• 2000.2 IPV6: Add point intents between h1 and h9 - PASS
• 2000.3 IPV6_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h24 - PASS
• 2000.8 1HOP: Add point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 3000.1 NOOPTION: Add single point to multi point intents - PASS
• 3000.2 IPV6: Add single point to multi point intents - PASS
• 3000.3 IPV6_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV6: Add multi point to single point intents - PASS
• 4000.3 IPV6_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - PASS

Case 5000: Test host mobility with host intents - PASS

• 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
• 5000.2 IPV6: Add host intents between h1 and h9 - PASS

Case 6000: Test Single to Multiple End Point Failure - PASS

• 6000.1 NOOPTION: test end point failure for multi point to single point intents - PASS
• 6000.2 IPV6: test end point failure for multi point to single point intents - PASS
• 6000.3 IPV6_2: test end point faliure for multi point to single point intents - PASS
• 6000.4 VLAN: test end point failure for multi point to single point intents - PASS
• 6000.5 NOOPTION: test end point failure for single point to multi point intents - PASS
• 6000.6 IPV6: test end point failure for single point to multi point intents - PASS
• 6000.7 IPV6_2: test end point failure for single point to multi point intents - PASS
• 6000.8 VLAN: test end point failure for single point to multi point intents - PASS

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

• 14.1 Stopping Mininet Topology - PASS