Case 1: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

• 1.1 Constructing test variables - PASS
• 1.2 Create and Apply cell file - PASS
• 1.3 Create and Install ONOS package - PASS
• 1.4 Starting ONOS service - PASS
• 1.5 Checking if ONOS CLI is ready - PASS
• 1.6 Starting Mininet Topology - PASS
• 1.7 Check whether the flow count is bigger than 116 - PASS
• 1.8 Check whether all flow status are ADDED - PASS
• 1.9 Check full connectivity CASE1 - PASS

Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

• 2.1 Create and Apply cell file - PASS
• 2.2 Create and Install ONOS package - PASS
• 2.3 Starting ONOS service - PASS
• 2.4 Checking if ONOS CLI is ready - PASS
• 2.5 Starting Mininet Topology - PASS
• 2.6 Check whether the flow count is bigger than 350 - PASS
• 2.7 Check whether all flow status are ADDED - PASS
• 2.8 Check full connectivity CASE2 - PASS

Case 3: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

• 3.1 Create and Apply cell file - PASS
• 3.2 Create and Install ONOS package - PASS
• 3.3 Starting ONOS service - PASS
• 3.4 Checking if ONOS CLI is ready - PASS
• 3.5 Starting Mininet Topology - PASS
• 3.6 Check whether the flow count is bigger than 15 - PASS
• 3.7 Check whether all flow status are ADDED - PASS
• 3.8 Check full connectivity CASE3 - PASS

Case 4: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

• 4.1 Create and Apply cell file - PASS
• 4.2 Create and Install ONOS package - PASS
• 4.3 Starting ONOS service - PASS
• 4.4 Checking if ONOS CLI is ready - PASS
• 4.5 Starting Mininet Topology - PASS
• 4.6 Check whether the flow count is bigger than 116 - PASS
• 4.7 Check whether all flow status are ADDED - PASS
• 4.8 Check full connectivity CASE4 - PASS

Case 5: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

• 5.1 Create and Apply cell file - PASS
• 5.2 Create and Install ONOS package - PASS
• 5.3 Starting ONOS service - PASS
• 5.4 Checking if ONOS CLI is ready - PASS
• 5.5 Starting Mininet Topology - PASS
• 5.6 Check whether the flow count is bigger than 350 - PASS
• 5.7 Check whether all flow status are ADDED - PASS
• 5.8 Check full connectivity CASE5 - PASS

Case 6: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

• 6.1 Create and Apply cell file - PASS
• 6.2 Create and Install ONOS package - PASS
• 6.3 Starting ONOS service - PASS
• 6.4 Checking if ONOS CLI is ready - PASS
• 6.5 Starting Mininet Topology - PASS
• 6.6 Check whether the flow count is bigger than 15 - PASS
• 6.7 Check whether all flow status are ADDED - PASS
• 6.8 Check full connectivity CASE4 - PASS