Case 1: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - FAIL

• 1.1 Constructing test variables - PASS
• 1.2 Create and Apply cell file - PASS
• 1.3 Create and Install ONOS package - PASS
• 1.4 Starting ONOS service - PASS
• 1.5 Checking if ONOS CLI is ready - PASS
• 1.6 Starting Mininet Topology - PASS
• 1.7 Check whether the flow count is bigger than 116 - PASS
• 1.8 Check whether all flow status are ADDED - PASS
• 1.9 Check full connectivity - PASS
• 1.10 Kill link between spine101 and leaf2 - PASS
• 1.11 Check full connectivity CASE1_Failure - PASS
• 1.12 Restore link between spine101 and leaf2 - FAIL
• Failed to bring link up
• 1.13 Check full connectivity CASE1_Recovery - PASS

Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - FAIL

• 2.1 Create and Apply cell file - PASS
• 2.2 Create and Install ONOS package - PASS
• 2.3 Starting ONOS service - PASS
• 2.4 Checking if ONOS CLI is ready - PASS
• 2.5 Starting Mininet Topology - PASS
• 2.6 Check whether the flow count is bigger than 350 - PASS
• 2.7 Check whether all flow status are ADDED - PASS
• 2.8 Check full connectivity - PASS
• 2.9 Kill link between spine101 and leaf2 - PASS
• 2.10 Check full connectivity CASE2_Failure - PASS
• 2.11 Restore link between spine101 and leaf2 - FAIL
• Failed to bring link up
• 2.12 Check full connectivity CASE2_Recovery - PASS

Case 4: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - FAIL

• 4.1 Create and Apply cell file - PASS
• 4.2 Create and Install ONOS package - PASS
• 4.3 Starting ONOS service - PASS
• 4.4 Checking if ONOS CLI is ready - PASS
• 4.5 Starting Mininet Topology - PASS
• 4.6 Check whether the flow count is bigger than 116 - PASS
• 4.7 Check whether all flow status are ADDED - PASS
• 4.8 Check full connectivity - PASS
• 4.9 Kill link between spine101 and leaf2 - PASS
• 4.10 Check full connectivity CASE3_Failure - PASS
• 4.11 Restore link between spine101 and leaf2 - FAIL
• Failed to bring link up
• 4.12 Check full connectivity CASE3_Recovery - PASS

Case 5: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - FAIL

• 5.1 Create and Apply cell file - PASS
• 5.2 Create and Install ONOS package - PASS
• 5.3 Starting ONOS service - PASS
• 5.4 Checking if ONOS CLI is ready - PASS
• 5.5 Starting Mininet Topology - PASS
• 5.6 Check whether the flow count is bigger than 350 - PASS
• 5.7 Check whether all flow status are ADDED - PASS
• 5.8 Check full connectivity - PASS
• 5.9 Kill link between spine101 and leaf2 - PASS
• 5.10 Check full connectivity CASE2_Failure - PASS
• 5.11 Restore link between spine101 and leaf2 - FAIL
• Failed to bring link up
• 5.12 Check full connectivity CASE2_Recovery - PASS