Case 1: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

• 1.1 Constructing test variables - PASS
• 1.2 Create and Apply cell file - PASS
• 1.3 Create and Install ONOS package - PASS
• 1.4 Starting ONOS service - PASS
• 1.5 Checking if ONOS CLI is ready - PASS
• 1.6 Starting Mininet Topology - PASS
• 1.7 Check whether the flow count is bigger than 116 - PASS
• 1.8 Check whether all flow status are ADDED - PASS
• 1.9 Check IP connectivity - PASS
• 1.10 Check VLAN connectivity - PASS
• 1.11 Kill spine101 - PASS
• 1.12 Check IP connectivity CASE1_Failure - PASS
• 1.13 Check VLAN connectivity CASE1_Failure - PASS
• 1.14 Recovering spine101 - PASS
• 1.15 Check whether the flow count is bigger than 116 - PASS
• 1.16 Check whether all flow status are ADDED - PASS
• 1.17 Check IP connectivity CASE1_Recovery - PASS
• 1.18 Check VLAN connectivity CASE1_Recovery - PASS

Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - FAIL

• 2.1 Create and Apply cell file - PASS
• 2.2 Create and Install ONOS package - PASS
• 2.3 Starting ONOS service - PASS
• 2.4 Checking if ONOS CLI is ready - PASS
• 2.5 Starting Mininet Topology - PASS
• 2.6 Check whether the flow count is bigger than 350 - PASS
• 2.7 Check whether all flow status are ADDED - PASS
• 2.8 Check IP connectivity - PASS
• 2.9 Check VLAN connectivity - PASS
• 2.10 Kill spine101 - PASS
• 2.11 Check IP connectivity CASE2_Failure - FAIL
• IP connectivity failed
• 2.12 Check VLAN connectivity CASE2_Failure - PASS
• 2.13 Recovering spine101 - PASS
• 2.14 Check whether the flow count is bigger than 350 - PASS
• 2.15 Check whether all flow status are ADDED - PASS
• 2.16 Check IP connectivity CASE2_Recovery - PASS
• 2.17 Check VLAN connectivity CASE2_Recovery - PASS

Case 4: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS

• 4.1 Create and Apply cell file - PASS
• 4.2 Create and Install ONOS package - PASS
• 4.3 Starting ONOS service - PASS
• 4.4 Checking if ONOS CLI is ready - PASS
• 4.5 Starting Mininet Topology - PASS
• 4.6 Check whether the flow count is bigger than 116 - PASS
• 4.7 Check whether all flow status are ADDED - PASS
• 4.8 Check IP connectivity - PASS
• 4.9 Check VLAN connectivity - PASS
• 4.10 Kill spine101 - PASS
• 4.11 Check IP connectivity CASE3_Failure - PASS
• 4.12 Check VLAN connectivity CASE3_Failure - PASS
• 4.13 Recovering spine101 - PASS
• 4.14 Check whether the flow count is bigger than 116 - PASS
• 4.15 Check whether all flow status are ADDED - PASS
• 4.16 Check IP connectivity CASE3_Recovery - PASS
• 4.17 Check VLAN connectivity CASE3_Recovery - PASS

Case 5: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - FAIL

• 5.1 Create and Apply cell file - PASS
• 5.2 Create and Install ONOS package - PASS
• 5.3 Starting ONOS service - PASS
• 5.4 Checking if ONOS CLI is ready - PASS
• 5.5 Starting Mininet Topology - PASS
• 5.6 Check whether the flow count is bigger than 350 - PASS
• 5.7 Check whether all flow status are ADDED - PASS
• 5.8 Check IP connectivity - PASS
• 5.9 Check VLAN connectivity - PASS
• 5.10 Kill spine101 - PASS
• 5.11 Check IP connectivity CASE4_Failure - FAIL
• IP connectivity failed
• 5.12 Check VLAN connectivity CASE4_Failure - PASS
• 5.13 Recovering spine101 - PASS
• 5.14 Check whether the flow count is bigger than 350 - PASS
• 5.15 Check whether all flow status are ADDED - PASS
• 5.16 Check IP connectivity CASE4_Recovery - PASS
• 5.17 Check VLAN connectivity CASE4_Recovery - PASS