commit aec67f8d9c49a2c845b0fedb45a103f8006f5559 (HEAD, origin/master, origin/HEAD, master)
Author: MaheshRaju-Huawei [mahesh.somalaraju@huawei.com]
AuthorDate: Mon Jul 18 16:39:25 2016 +0530
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Tue Jul 19 08:02:29 2016 +0000

PCE WEB GUI defect Fixes[ONOS-4811,ONOS-4812, ONOS-4813]

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

• 1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS
• 2.6 Start ONOS cli - PASS
• 2.7 Checking that ONOS is ready - PASS
• 2.8 setup the ipv6NeighbourDiscovery - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 1000.1 IPV6: Add host intents between h1 and h9 - FAIL
• IPV6: Host intent test failed between two IPV6 hosts
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
• DUALSTACK: Host intent test failed between twodual stack host using IPV6
• 1000.3 1HOP: Add host intents between h1 and h3 - FAIL
• 1HOP: Host intent test failed between twohost using IPV6 in the same switch
• 1000.4 VLAN: Add vlan host intents between h5 and h24 - FAIL
• VLAN1: Host intent test failed between twohost using IPV6 in the same VLAN

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - No Result

• 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - FAIL
• Assertion Result for NOOPTION point intent
• Initial Intent State Failed
• Initial Flow Count Passed
• Initial Flow State Failed
• Initial Ping6all Failed
• Remove Intents Passed
• 2000.2 IPV6: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV6 point intent
• Initial Intent State Failed
• Initial Flow Count Passed
• Initial Flow State Failed
• Initial Ping6all Failed
• Link Down Passed
• Link Down Topology State Failed
• Link Down Ping6all Failed
• Link Down Intent State Failed
• Link Up Passed
• Link Up Topology State Failed
• Link Up Ping6all Failed
• Link Up Intent State Failed
• Remove Intents Passed
• 2000.3 IPV6_2: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV6 no mac address point intents
• Initial Intent State Failed
• Initial Flow Count Passed
• Initial Flow State Failed
• Initial Ping6all Failed
• Remove Intents Passed
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV6 using ICMP point intents
• Initial Intent State Failed
• Initial Flow Count Passed
• Initial Flow State Failed
• Initial Ping6all Failed
• Remove Intents Failed