commit 36dd8f1608a728c546425fd9bf782edd65b3a8e7 (HEAD, origin/master, origin/HEAD, master)
Author: Simon Hunt [simon@onlab.us]
AuthorDate: Fri Aug 26 18:54:45 2016 -0700
Commit: Simon Hunt [simon@onlab.us]
CommitDate: Fri Aug 26 19:12:43 2016 -0700

Added mojo icons:

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

• 1.1 Constructing test variables - PASS

Case 25: Preparing network-cfg.json to load configurations - PASS

• 25.1 Moving network-cfg.json to /home/sdn/onos/tools/package/config/ - PASS

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Creating ONOS package - PASS
• 2.3 Uninstalling ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Starting ONOS service - PASS

Case 20: Add Network configurations to the cluster - PASS

Add Network Configurations for devices not discovered yet. One device is allowed, the other disallowed.

• 20.1 Add Net Cfg for switch1 - PASS
• 20.2 Add Net Cfg for switch3 - PASS
• 20.3 Check net config - PASS

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 27: Posting network configurations to the top level web resource - PASS

• 27.1 Get json object from Net Cfg - No Result
• 27.2 Posting json object to Net Cfg - No Result
• 27.3 Compare device with ONOS - No Result
• 27.4 Check net config - PASS
• 27.5 ONOS should only show devices S1, S2, S4, S5 and S6 - PASS
• 27.6 Modify json object so S6 is disallowed - PASS

Case 26: Check to see if the pre-startup configurations were set, then remove their allowed status - PASS

• 26.1 Checking configurations for Switches 5 and 6 - No Result
• 26.2 ONOS should only show devices S1, S2, S4, and S5 - PASS
• 26.3 Removing allowed status from Switches 5 and 6 - No Result

Case 21: Check Devices After they initially connect to ONOS - FAIL

• 21.1 Check net config - FAIL
• Net Cfg is different on some nodes.
• 21.2 ONOS should only show devices S1, S2, and S4 - PASS
• 21.3 Check device annotations - PASS

Case 22: Add Network configurations for connected devices to the cluster - PASS

Add Network Configurations for discovered devices. One device is allowed, the other disallowed.

• 22.1 Add Net Cfg for switch2 - PASS
• 22.2 Add Net Cfg for switch4 - PASS
• 22.3 Check net config - PASS

Case 23: Check Devices after all configurations are set - FAIL

• 23.1 Check net config - PASS
• 23.2 ONOS should only show devices S1 and S2 - PASS
• 23.3 Check device annotations - FAIL
• Incorrect annotations for configured devices.

Case 24: Testing removal of configurations - PASS

• 24.1 Remove 'allowed' configuration from all devices - PASS
• 24.2 Check net config - PASS
• 24.3 Delete basic config for s1 and s2 - PASS
• 24.4 Check net config - PASS
• 24.5 Delete the net config for S3 - PASS
• 24.6 Check net config - PASS
• 24.7 Delete the net config for all devices - PASS
• 24.8 Check net config - PASS
• 24.9 Assert the net config for devices is empty - PASS