View Source

HAswapNodes at 25 Oct 2016 20:38:04

commit 0fc09dc516cc19b3dc524d2aae1393fc9c9bc969 (HEAD, origin/onos-1.7, onos-1.7)
Author: Thomas Vachuska [tom@onlab.us]
AuthorDate: Tue Oct 4 11:50:29 2016 -0700
Commit: Thomas Vachuska [tom@onlab.us]
CommitDate: Tue Oct 25 22:33:07 2016 +0000

Fixing onos-create-app to bomb if mvn command fails for some reason.
--
(cherry picked from commit 525651fdc03f8437e3c6fe69d4fb564a78f3e50a)

<iframe src="https://onos-jenkins.onlab.us/job/HAswapNodes/plot/Plot-HA/getPlot?index=1&width=500&height=300"noborder="0" width="500" height="300" scrolling="yes" seamless="seamless"></iframe>

Case 1: Setting up test environment - PASS

Setup the test environment including installing ONOS, starting Mininet and ONOScli sessions.

1.1 Create cell file - No Result
1.2 Applying cell variable to environment - PASS
1.3 Verify connectivity to cell - PASS
1.4 Setup server for cluster metadata file - PASS
1.5 Generate initial metadata file - PASS
1.6 Starting Mininet - PASS
1.7 Git checkout and pull master - No Result
1.8 Using mvn clean install - PASS
1.9 Copying backup config files - PASS
1.10 Creating ONOS package - PASS
1.11 Installing ONOS package - PASS
1.12 Checking if ONOS is up yet - PASS
1.13 Starting ONOS CLI sessions - PASS
1.14 Checking ONOS nodes - PASS
1.15 Activate apps defined in the params file - No Result
1.16 Set ONOS configurations - PASS
1.17 App Ids check - PASS

Case 2: Assigning devices to controllers - PASS

Assign switches to ONOS using 'ovs-vsctl' and check that an ONOS node becomes the master of the device.

2.1 Assign switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

8.1 Comparing ONOS topology to MN topology - PASS
8.2 Hosts view is consistent across all ONOS nodes - PASS
8.3 Hosts information is correct - PASS
8.4 Host attachment points to the network - PASS
8.5 Clusters view is consistent across all ONOS nodes - PASS
8.6 There is only one SCC - PASS
8.7 Device information is correct - PASS
8.8 Links are correct - PASS
8.9 Hosts are correct - PASS
8.10 Checking ONOS nodes - PASS

Case 21: Assigning Controller roles for switches - PASS

Check that ONOS is connected to each device. Then manually assign mastership to specific ONOS nodes using 'device-role'

21.1 Assign mastership of switches to specific controllers - PASS
21.2 Check mastership was correctly assigned - PASS

Case 3: Adding host Intents - PASS

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

3.1 Install reactive forwarding app - PASS
3.2 Check app ids - PASS
3.3 Discovering Hosts( Via pingall for now ) - PASS
3.4 Uninstall reactive forwarding app - PASS
3.5 Check app ids - PASS
3.6 Add host intents via cli - PASS
3.7 Intent Anti-Entropy dispersion - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

8.1 Comparing ONOS topology to MN topology - PASS
8.2 Hosts view is consistent across all ONOS nodes - PASS
8.3 Hosts information is correct - PASS
8.4 Host attachment points to the network - PASS
8.5 Clusters view is consistent across all ONOS nodes - PASS
8.6 There is only one SCC - PASS
8.7 Device information is correct - PASS
8.8 Links are correct - PASS
8.9 Hosts are correct - PASS
8.10 Checking ONOS nodes - PASS

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

4.1 Check Intent state - PASS
4.2 Ping across added host intents - PASS
4.3 Check leadership of topics - PASS
4.4 Wait a minute then ping again - PASS

Case 5: Setting up and gathering data for current state - PASS

5.1 Check that each switch has a master - PASS
5.2 Get the Mastership of each switch from each controller - PASS
5.3 Check for consistency in roles from each controller - PASS
5.4 Get the intents from each controller - PASS
5.5 Check for consistency in Intents from each controller - PASS
5.6 Get the flows from each controller - PASS
5.7 Check for consistency in Flows from each controller - PASS
5.8 Get the OF Table entries - No Result
5.9 Start continuous pings - No Result
5.10 Collecting topology information from ONOS - No Result
5.11 Host view is consistent across ONOS nodes - PASS
5.12 Each host has an IP address - PASS
5.13 Cluster view is consistent across ONOS nodes - PASS
5.14 Cluster view correct across ONOS nodes - PASS
5.15 Comparing ONOS topology to MN - PASS
5.16 Device information is correct - PASS
5.17 Links are correct - PASS
5.18 Hosts are correct - PASS

Case 14: Start Leadership Election app - PASS

14.1 Install leadership election app - PASS
14.2 Run for election on each node - PASS
14.3 First node was elected leader - PASS

Case 16: Install Primitives app - PASS

16.1 Install Primitives app - PASS

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

17.1 Increment then get a default counter on each node - PASS
17.2 Get then Increment a default counter on each node - PASS
17.3 Counters we added have the correct values - PASS
17.4 Add -8 to then get a default counter on each node - PASS
17.5 Add 5 to then get a default counter on each node - PASS
17.6 Get then add 5 to a default counter on each node - PASS
17.7 Counters we added have the correct values - PASS
17.8 Distributed Set get - PASS
17.9 Distributed Set size - PASS
17.10 Distributed Set add() - PASS
17.11 Distributed Set addAll() - PASS
17.12 Distributed Set contains() - PASS
17.13 Distributed Set containsAll() - PASS
17.14 Distributed Set remove() - PASS
17.15 Distributed Set removeAll() - PASS
17.16 Distributed Set addAll() - PASS
17.17 Distributed Set clear() - PASS
17.18 Distributed Set addAll() - PASS
17.19 Distributed Set retain() - PASS
17.20 Partitioned Transactional maps put - PASS
17.21 Partitioned Transactional maps get - PASS

Case 6: Swap some of the ONOS nodes - FAIL

6.1 Checking ONOS Logs for errors - No Result
6.2 Generate new metadata file - PASS
6.3 Start new nodes - PASS
6.4 Checking if ONOS is up yet - PASS
6.5 Starting ONOS CLI sessions - PASS
6.6 Checking ONOS nodes - FAIL

Failed to rerun for election

6.7 Reapplying cell variable to environment - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

8.1 Comparing ONOS topology to MN topology - FAIL

ONOS topology don't match Mininet

8.2 Hosts view is consistent across all ONOS nodes - FAIL

ONOS nodes have different views of hosts

8.3 Hosts information is correct - FAIL

Host information is incorrect

8.4 Host attachment points to the network - PASS