SRSwitchFailure at 29 Nov 2016 09:16:29
Case 1: Bridging and Routing sanity test with 2x2 Leaf-spine - PASS
- 1.1 Constructing test variables - PASS
- 1.2 Create and Apply cell file - PASS
- 1.3 Create and Install ONOS package - PASS
- 1.4 Starting ONOS service - PASS
- 1.5 Checking if ONOS CLI is ready - PASS
- 1.6 Starting Mininet Topology - PASS
- 1.7 Check whether the flow count is bigger than 116 - PASS
- 1.8 Check whether all flow status are ADDED - PASS
- 1.9 Connectivity for [u'h1', u'h2', u'h3', u'h4'] - PASS
- 1.10 Connectivity for [u'olt10', u'vsg10'] - PASS
- 1.11 Connectivity for [u'olt5', u'vsg5'] - PASS
- 1.12 Kill spine101 - PASS
- 1.13 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1_Failure - PASS
- 1.14 Connectivity for [u'olt10', u'vsg10'] CASE1_Failure - PASS
- 1.15 Connectivity for [u'olt5', u'vsg5'] CASE1_Failure - PASS
- 1.16 Recovering spine101 - PASS
- 1.17 Check whether the flow count is bigger than 116 - PASS
- 1.18 Check whether all flow status are ADDED - PASS
- 1.19 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1_Recovery - PASS
- 1.20 Connectivity for [u'olt10', u'vsg10'] CASE1_Recovery - PASS
- 1.21 Connectivity for [u'olt5', u'vsg5'] CASE1_Recovery - PASS
Case 2: Bridging and Routing sanity test with 4x4 Leaf-spine - PASS
- 2.1 Create and Apply cell file - PASS
- 2.2 Create and Install ONOS package - PASS
- 2.3 Starting ONOS service - PASS
- 2.4 Checking if ONOS CLI is ready - PASS
- 2.5 Starting Mininet Topology - PASS
- 2.6 Check whether the flow count is bigger than 350 - PASS
- 2.7 Check whether all flow status are ADDED - PASS
- 2.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - PASS
- 2.9 Connectivity for [u'olt10', u'vsg10'] - PASS
- 2.10 Connectivity for [u'olt5', u'vsg5'] - PASS
- 2.11 Kill spine101 - PASS
- 2.12 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE2_Failure - PASS
- 2.13 Connectivity for [u'olt10', u'vsg10'] CASE2_Failure - PASS
- 2.14 Connectivity for [u'olt5', u'vsg5'] CASE2_Failure - PASS
- 2.15 Recovering spine101 - PASS
- 2.16 Check whether the flow count is bigger than 350 - PASS
- 2.17 Check whether all flow status are ADDED - PASS
- 2.18 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE2_Recovery - PASS
- 2.19 Connectivity for [u'olt10', u'vsg10'] CASE2_Recovery - PASS
- 2.20 Connectivity for [u'olt5', u'vsg5'] CASE2_Recovery - PASS
Case 4: Bridging and Routing sanity test with 2x2 Leaf-spine - FAIL
- 4.1 Create and Apply cell file - PASS
- 4.2 Create and Install ONOS package - PASS
- 4.3 Starting ONOS service - FAIL
- ONOS service did not start properly
- 4.4 Checking if ONOS CLI is ready - PASS
- 4.5 Starting Mininet Topology - PASS
- 4.6 Check whether the flow count is bigger than 116 - PASS
- 4.7 Check whether all flow status are ADDED - PASS
- 4.8 Connectivity for [u'h1', u'h2', u'h3', u'h4'] - PASS
- 4.9 Connectivity for [u'olt10', u'vsg10'] - PASS
- 4.10 Connectivity for [u'olt5', u'vsg5'] - PASS
- 4.11 Kill spine101 - PASS
- 4.12 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE3_Failure - PASS
- 4.13 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure - PASS
- 4.14 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure - PASS
- 4.15 Recovering spine101 - PASS
- 4.16 Check whether the flow count is bigger than 116 - PASS
- 4.17 Check whether all flow status are ADDED - PASS
- 4.18 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE3_Recovery - PASS
- 4.19 Connectivity for [u'olt10', u'vsg10'] CASE3_Recovery - PASS
- 4.20 Connectivity for [u'olt5', u'vsg5'] CASE3_Recovery - PASS
Case 5: Bridging and Routing sanity test with 4x4 Leaf-spine - PASS
- 5.1 Create and Apply cell file - PASS
- 5.2 Create and Install ONOS package - PASS
- 5.3 Starting ONOS service - PASS
- 5.4 Checking if ONOS CLI is ready - PASS
- 5.5 Starting Mininet Topology - PASS
- 5.6 Check whether the flow count is bigger than 350 - PASS
- 5.7 Check whether all flow status are ADDED - PASS
- 5.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - PASS
- 5.9 Connectivity for [u'olt10', u'vsg10'] - PASS
- 5.10 Connectivity for [u'olt5', u'vsg5'] - PASS
- 5.11 Kill spine101 - PASS
- 5.12 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE4_Failure - PASS
- 5.13 Connectivity for [u'olt10', u'vsg10'] CASE4_Failure - PASS
- 5.14 Connectivity for [u'olt5', u'vsg5'] CASE4_Failure - PASS
- 5.15 Recovering spine101 - PASS
- 5.16 Check whether the flow count is bigger than 350 - PASS
- 5.17 Check whether all flow status are ADDED - PASS
- 5.18 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE4_Recovery - PASS
- 5.19 Connectivity for [u'olt10', u'vsg10'] CASE4_Recovery - PASS
- 5.20 Connectivity for [u'olt5', u'vsg5'] CASE4_Recovery - PASS