Transaction Language 1 (TL1) is a management protocol that is widely used in the optical networking space. ONOS comes with the needed building blocks to connect and interact with TL1 devices.


Tl1Device is a container that holds the Netty channel and some device attributes such as login and password.

Tl1Command represents a command that is sent from the controller to a network element. Its typical structure is as below, and the interface defines various accessor methods as well as a builder.


Tl1Controller maintains a list of TL1 devices, allows you to connect to them, send and receive messages, and register listeners.

Tl1Listener defines the interface for notification of device connect/disconnect events.

Implementations of all these interfaces are prefixed with Default, for instance DefaultTl1Controller holds the implementation of the Tl1Controller interface.


Devices are added to the controller, and then need to be explicitly connected (which leads to a Netty channel being initialized). The controller stores devices using a ConcurrentMap<DeviceId, Tl1Device>. For every device, but this time identified by the device's Netty channel, it will also store a ConcurrentMap<Integer, CompletableFuture<String>>. This map is keyed on the message ctag (type Integer), and stores the future response (type String) of the device. An important consequence is that ctag's are assumed to be unique per device, and it is the responsibility of the sendMsg() caller to ensure this uniqueness.

Device Provider

The ONOS TL1 southbound is implemented in the Tl1DeviceProvider. This class implements the ONOS SB interface, and most importantly, will connect to the device when it is assigned the master role (in all other cases the instance will disconnect from the device). When a device is connected, the device provider will use the DeviceDescriptionDiscovery to fetch and update the device/port description.

Adding devices to ONOS is done by injecting them into the device provider, more specifically Here is an example JSON, that you will inject into ONOS using onos-netcfg $OC1 tl1.json.

  "devices": {
    "tl1:<ip>:<port>": {
      "tl1": {
        "ip": <ip>,
        "port": <port>,
        "username": <username>,
        "password": <password>
      "basic": {
        "driver": <driver-name>


Adding a new device to ONOS requires implementing a set of behaviors. For instance, to discover devices and their ports, implement the DeviceDescriptionDiscovery. If your device supports flow rules, implement the FlowRuleProgrammable. And so on. Go here for more information: Device Driver Subsystem.

In the following, let's take LumentumWaveReadyDiscovery as an example. Here you can see how the behavior interacts with the TL1 controller. For example, this is how we fetch the device description.

// Fetch device description
Tl1Command ddCmd = DefaultTl1Command.builder()
Future<String> dd = ctrl.sendMsg(deviceId, ddCmd);

try {
    String ddResponse = dd.get(TIMEOUT, TimeUnit.MILLISECONDS);

    return new DefaultDeviceDescription(defaultDescription, true, extractAnnotations(ddResponse));
} catch (InterruptedException | ExecutionException | TimeoutException e) {
    log.error("Device description not found", e);
    return defaultDescription;

We do three things: (1) build a TL1Command using a builder pattern, (2) send the message using the controller, and (3) wait for a response to arrive.

After implementing your behaviors, ensure that ONOS knows about them. Here is an example of the lumentum-drivers.xml.

<driver name="lumentum-waveready" manufacturer="Lumentum" hwVersion="WR*">
    <behaviour api=""
    <behaviour api=""

To ensure the TL1 provider and protocol are loaded on activation of your driver, you will need to specify this in your driver BUCK/pom.xml file as follows (note the required_apps/ section):

onos_app (
    app_name = 'org.onosproject.drivers.lumentum',
    title = 'Lumentum Device Drivers',
    category = 'Drivers',
    url = '',
    description = 'ONOS Lumentum Device Drivers application.',
    required_apps = [ 'org.onosproject.snmp', 'org.onosproject.faultmanagement', 'org.onosproject.optical-model',
<project xmlns=""
        <>Lumentum Device Drivers</>

Missing features / Help wanted

Here is a list of desirable features that unfortunately are not available in the current code base. Patches and bug reports are very welcome!