Case 1: ONOS Failure test with 2x2 Leaf-spine - FAIL

• 1.1 Constructing test variables - PASS
• 1.2 Create and Apply cell file - PASS
• 1.3 Create and Install ONOS package - PASS
• 1.4 Starting ONOS service - PASS
• 1.5 Checking if ONOS CLI is ready - PASS
• 1.6 Starting Mininet Topology - PASS
• 1.7 Check whether the flow count is bigger than 116 - PASS
• 1.8 Check whether all flow status are ADDED - PASS
• 1.9 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1 - PASS
• 1.10 Connectivity for [u'olt10', u'vsg10'] CASE1 - PASS
• 1.11 Connectivity for [u'olt5', u'vsg5'] CASE1 - PASS
• 1.12 Killing ONOS instance - PASS
• 1.13 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1_Failure - PASS
• 1.14 Connectivity for [u'olt10', u'vsg10'] CASE1_Failure - PASS
• 1.15 Connectivity for [u'olt5', u'vsg5'] CASE1_Failure - PASS
• 1.16 Recovering ONOS instance - PASS
• 1.17 Checking if ONOS CLI is ready - PASS
• 1.18 Check whether the flow count is bigger than 116 - PASS
• 1.19 Check whether all flow status are ADDED - PASS
• 1.20 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1_Failure - FAIL
• IP connectivity failed
• 1.21 Connectivity for [u'olt10', u'vsg10'] CASE1_Failure - PASS
• 1.22 Connectivity for [u'olt5', u'vsg5'] CASE1_Failure - PASS

Case 2: ONOS Failure test with 4x4 Leaf-spine - FAIL

• 2.1 Create and Apply cell file - PASS
• 2.2 Create and Install ONOS package - PASS
• 2.3 Starting ONOS service - PASS
• 2.4 Checking if ONOS CLI is ready - PASS
• 2.5 Starting Mininet Topology - PASS
• 2.6 Check whether the flow count is bigger than 350 - PASS
• 2.7 Check whether all flow status are ADDED - PASS
• 2.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE2 - PASS
• 2.9 Connectivity for [u'olt10', u'vsg10'] CASE2 - PASS
• 2.10 Connectivity for [u'olt5', u'vsg5'] CASE2 - PASS
• 2.11 Killing ONOS instance - PASS
• 2.12 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE2_Failure - PASS
• 2.13 Connectivity for [u'olt10', u'vsg10'] CASE2_Failure - PASS
• 2.14 Connectivity for [u'olt5', u'vsg5'] CASE2_Failure - PASS
• 2.15 Recovering ONOS instance - PASS
• 2.16 Checking if ONOS CLI is ready - PASS
• 2.17 Check whether the flow count is bigger than 350 - FAIL
• Flow count looks wrong: False
• 2.18 Check whether all flow status are ADDED - PASS
• 2.19 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE3_Recovery - FAIL
• IP connectivity failed
• 2.20 Connectivity for [u'olt10', u'vsg10'] CASE3_Recovery - PASS
• 2.21 Connectivity for [u'olt5', u'vsg5'] CASE3_Recovery - PASS

Case 3: ONOS Failure test with single switch - PASS

• 3.1 Create and Apply cell file - PASS
• 3.2 Create and Install ONOS package - PASS
• 3.3 Starting ONOS service - PASS
• 3.4 Checking if ONOS CLI is ready - PASS
• 3.5 Starting Mininet Topology - PASS
• 3.6 Check whether the flow count is bigger than 15 - PASS
• 3.7 Check whether all flow status are ADDED - PASS
• 3.8 Connectivity for [u'h1', u'h2'] CASE3 - PASS
• 3.9 Connectivity for [u'olt10', u'vsg10'] CASE3 - PASS
• 3.10 Connectivity for [u'olt5', u'vsg5'] CASE3 - PASS
• 3.11 Killing ONOS instance - PASS
• 3.12 Connectivity for [u'h1', u'h2'] CASE3_Failure - PASS
• 3.13 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure - PASS
• 3.14 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure - PASS
• 3.15 Recovering ONOS instance - PASS
• 3.16 Checking if ONOS CLI is ready - PASS
• 3.17 Check whether the flow count is bigger than 15 - PASS
• 3.18 Check whether all flow status are ADDED - PASS
• 3.19 Connectivity for [u'h1', u'h2'] CASE3_Failure - PASS
• 3.20 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure - PASS
• 3.21 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure - PASS