View Source

SRDynamic at 19 Mar 2017 16:53:51

Case 1: Bridging and Routing sanity test with 2x2 Leaf-spine - PASS

1.1 Constructing test variables - PASS
1.2 Create and Apply cell file - PASS
1.3 Create and Install ONOS package - PASS
1.4 Starting ONOS service - PASS
1.5 Checking if ONOS CLI is ready - PASS
1.6 Starting Mininet Topology - PASS
1.7 Check whether the flow count is bigger than 116 - PASS
1.8 Check whether all flow status are ADDED - PASS
1.9 Connectivity for [u'h1', u'h2', u'h3', u'h4'] - PASS
1.10 Connectivity for [u'olt10', u'vsg10'] - PASS
1.11 Connectivity for [u'olt5', u'vsg5'] - PASS
1.12 Pushing new configuration - No Result
1.13 Pushing new configuration - No Result
1.14 Check whether the flow count is bigger than 140 - PASS
1.15 Check whether all flow status are ADDED - PASS
1.16 Connectivity for [u'h1', u'h2', u'h3', u'h4', 'in1', 'out1'] CASE1 - PASS
1.17 Connectivity for [u'olt10', u'vsg10'] CASE1 - PASS
1.18 Connectivity for [u'olt5', u'vsg5'] CASE1 - PASS
1.19 Connectivity for ['olt1', 'vsg1'] CASE1 - PASS

Case 2: Bridging and Routing sanity test with 4x4 Leaf-spine - PASS

2.1 Create and Apply cell file - PASS
2.2 Create and Install ONOS package - PASS
2.3 Starting ONOS service - PASS
2.4 Checking if ONOS CLI is ready - PASS
2.5 Starting Mininet Topology - PASS
2.6 Check whether the flow count is bigger than 350 - PASS
2.7 Check whether all flow status are ADDED - PASS
2.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - PASS
2.9 Connectivity for [u'olt10', u'vsg10'] - PASS
2.10 Connectivity for [u'olt5', u'vsg5'] - PASS
2.11 Pushing new configuration - No Result
2.12 Pushing new configuration - No Result
2.13 Check whether the flow count is bigger than 380 - PASS
2.14 Check whether all flow status are ADDED - PASS
2.15 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8', 'in1', 'out1'] CASE2 - PASS
2.16 Connectivity for [u'olt10', u'vsg10'] CASE2 - PASS
2.17 Connectivity for [u'olt5', u'vsg5'] CASE2 - PASS
2.18 Connectivity for ['olt1', 'vsg1'] CASE2 - PASS

Case 3: Bridging and Routing sanity test with single switch - PASS

3.1 Create and Apply cell file - PASS
3.2 Create and Install ONOS package - PASS
3.3 Starting ONOS service - PASS
3.4 Checking if ONOS CLI is ready - PASS
3.5 Starting Mininet Topology - PASS
3.6 Check whether the flow count is bigger than 15 - PASS
3.7 Check whether all flow status are ADDED - PASS
3.8 Connectivity for [u'h1', u'h2'] - PASS
3.9 Connectivity for [u'olt10', u'vsg10'] - PASS
3.10 Connectivity for [u'olt5', u'vsg5'] - PASS
3.11 Pushing new configuration - No Result
3.12 Pushing new configuration - No Result
3.13 Check whether the flow count is bigger than 18 - PASS
3.14 Check whether all flow status are ADDED - PASS
3.15 Connectivity for [u'h1', u'h2', 'in1', 'out1'] CASE3 - PASS
3.16 Connectivity for [u'olt10', u'vsg10'] CASE3 - PASS
3.17 Connectivity for [u'olt5', u'vsg5'] CASE3 - PASS
3.18 Connectivity for ['olt1', 'vsg1'] CASE3 - PASS

Case 4: Bridging and Routing sanity test with 2x2 Leaf-spine - FAIL

4.1 Create and Apply cell file - PASS
4.2 Create and Install ONOS package - PASS
4.3 Starting ONOS service - PASS
4.4 Checking if ONOS CLI is ready - PASS
4.5 Starting Mininet Topology - PASS
4.6 Check whether the flow count is bigger than 116 - PASS
4.7 Check whether all flow status are ADDED - PASS
4.8 Connectivity for [u'h1', u'h2', u'h3', u'h4'] - PASS
4.9 Connectivity for [u'olt10', u'vsg10'] - PASS
4.10 Connectivity for [u'olt5', u'vsg5'] - PASS
4.11 Pushing new configuration - No Result
4.12 Pushing new configuration - No Result
4.13 Check whether the flow count is bigger than 140 - PASS
4.14 Check whether all flow status are ADDED - PASS
4.15 Connectivity for [u'h1', u'h2', u'h3', u'h4', 'in1', 'out1'] CASE4 - PASS
4.16 Connectivity for [u'olt10', u'vsg10'] CASE4 - PASS
4.17 Connectivity for [u'olt5', u'vsg5'] CASE4 - PASS
4.18 Connectivity for ['olt1', 'vsg1'] CASE4 - PASS
4.19 Killing ONOS instance - FAIL

Failed to turn off ONOS Instance

4.20 Removing host configuration - No Result
4.21 Removing configuration - No Result
4.22 Removing vlan configuration - No Result
4.23 Check whether the flow count is bigger than 116 - PASS
4.24 Check whether all flow status are ADDED - PASS
4.25 Connectivity for [u'h1', u'h2', u'h3', u'h4', 'in1', 'out1'] CASE4_after - PASS
4.26 Connectivity for [u'olt10', u'vsg10'] CASE4_after - PASS
4.27 Connectivity for [u'olt5', u'vsg5'] CASE4_after - PASS
4.28 Connectivity for ['olt1', 'vsg1'] CASE4_after - PASS

Case 5: Bridging and Routing sanity test with 4x4 Leaf-spine - FAIL

5.1 Create and Apply cell file - PASS
5.2 Create and Install ONOS package - PASS
5.3 Starting ONOS service - PASS
5.4 Checking if ONOS CLI is ready - PASS
5.5 Starting Mininet Topology - PASS
5.6 Check whether the flow count is bigger than 350 - PASS
5.7 Check whether all flow status are ADDED - PASS
5.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] - PASS
5.9 Connectivity for [u'olt10', u'vsg10'] - PASS
5.10 Connectivity for [u'olt5', u'vsg5'] - PASS
5.11 Pushing new configuration - No Result
5.12 Pushing new configuration - No Result
5.13 Check whether the flow count is bigger than 380 - PASS
5.14 Check whether all flow status are ADDED - PASS
5.15 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8', 'in1', 'out1'] CASE5 - PASS
5.16 Connectivity for [u'olt10', u'vsg10'] CASE5 - PASS
5.17 Connectivity for [u'olt5', u'vsg5'] CASE5 - PASS
5.18 Connectivity for ['olt1', 'vsg1'] CASE5 - PASS
5.19 Killing ONOS instance - FAIL

Failed to turn off ONOS Instance

5.20 Removing host configuration - No Result
5.21 Removing configuration - No Result
5.22 Removing vlan configuration - No Result
5.23 Check whether the flow count is bigger than 350 - PASS
5.24 Check whether all flow status are ADDED - PASS
5.25 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8', 'in1', 'out1'] CASE5_After - PASS
5.26 Connectivity for [u'olt10', u'vsg10'] CASE5_After - PASS
5.27 Connectivity for [u'olt5', u'vsg5'] CASE5_After - PASS
5.28 Connectivity for ['olt1', 'vsg1'] CASE5_After - PASS

Case 6: Bridging and Routing sanity test with single switch - FAIL

6.1 Create and Apply cell file - PASS
6.2 Create and Install ONOS package - PASS
6.3 Starting ONOS service - PASS
6.4 Checking if ONOS CLI is ready - PASS
6.5 Starting Mininet Topology - PASS
6.6 Check whether the flow count is bigger than 15 - PASS
6.7 Check whether all flow status are ADDED - PASS
6.8 Connectivity for [u'h1', u'h2'] - PASS
6.9 Connectivity for [u'olt10', u'vsg10'] - PASS
6.10 Connectivity for [u'olt5', u'vsg5'] - PASS
6.11 Pushing new configuration - No Result
6.12 Pushing new configuration - No Result
6.13 Check whether the flow count is bigger than 20 - PASS
6.14 Check whether all flow status are ADDED - PASS
6.15 Connectivity for [u'h1', u'h2', 'in1', 'out1'] CASE6 - PASS
6.16 Connectivity for [u'olt10', u'vsg10'] CASE6 - PASS
6.17 Connectivity for [u'olt5', u'vsg5'] CASE6 - PASS
6.18 Connectivity for ['olt1', 'vsg1'] CASE6 - PASS
6.19 Killing ONOS instance - FAIL

Failed to turn off ONOS Instance

6.20 Removing host configuration - No Result
6.21 Removing configuration - No Result
6.22 Removing vlan configuration - No Result
6.23 Check whether the flow count is bigger than 15 - PASS
6.24 Check whether all flow status are ADDED - PASS
6.25 Connectivity for [u'h1', u'h2', 'in1', 'out1'] CASE6_After - PASS
6.26 Connectivity for [u'olt10', u'vsg10'] CASE6_After - PASS
6.27 Connectivity for [u'olt5', u'vsg5'] CASE6_After - PASS
6.28 Connectivity for ['olt1', 'vsg1'] CASE6_After - PASS