SROnosFailure at 16 Sep 2017 11:50:45
Case 1: ONOS Failure test with 2x2 Leaf-spine - FAIL
- 1.1 Constructing test variables - PASS
- 1.2 Create and Apply cell file - PASS
- 1.3 Create and Install ONOS package - PASS
- 1.4 Starting ONOS service - PASS
- 1.5 Checking if ONOS CLI is ready - PASS
- 1.6 Starting Mininet Topology - PASS
- 1.7 Check whether the flow count is bigger than 116 - FAIL
- Flow count looks wrong: False
- 1.8 Check whether all flow status are ADDED - PASS
- 1.9 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1 - FAIL
- 1.10 Connectivity for [u'olt10', u'vsg10'] CASE1 - FAIL
- 1.11 Connectivity for [u'olt5', u'vsg5'] CASE1 - FAIL
- 1.12 Killing ONOS instance - PASS
- 1.13 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1_Failure - FAIL
- 1.14 Connectivity for [u'olt10', u'vsg10'] CASE1_Failure - FAIL
- 1.15 Connectivity for [u'olt5', u'vsg5'] CASE1_Failure - FAIL
- 1.16 Recovering ONOS instance - PASS
- 1.17 Checking if ONOS CLI is ready - PASS
- 1.18 Checking ONOS nodes - PASS
- 1.19 Check whether the flow count is bigger than 116 - FAIL
- Flow count looks wrong: False
- 1.20 Check whether all flow status are ADDED - PASS
- 1.21 Connectivity for [u'h1', u'h2', u'h3', u'h4'] CASE1_Failure - FAIL
- 1.22 Connectivity for [u'olt10', u'vsg10'] CASE1_Failure - FAIL
- 1.23 Connectivity for [u'olt5', u'vsg5'] CASE1_Failure - FAIL
Case 2: ONOS Failure test with 4x4 Leaf-spine - FAIL
- 2.1 Create and Apply cell file - PASS
- 2.2 Create and Install ONOS package - PASS
- 2.3 Starting ONOS service - PASS
- 2.4 Checking if ONOS CLI is ready - PASS
- 2.5 Starting Mininet Topology - PASS
- 2.6 Check whether the flow count is bigger than 350 - FAIL
- Flow count looks wrong: False
- 2.7 Check whether all flow status are ADDED - PASS
- 2.8 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE2 - FAIL
- 2.9 Connectivity for [u'olt10', u'vsg10'] CASE2 - FAIL
- 2.10 Connectivity for [u'olt5', u'vsg5'] CASE2 - FAIL
- 2.11 Killing ONOS instance - PASS
- 2.12 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE2_Failure - FAIL
- 2.13 Connectivity for [u'olt10', u'vsg10'] CASE2_Failure - FAIL
- 2.14 Connectivity for [u'olt5', u'vsg5'] CASE2_Failure - FAIL
- 2.15 Recovering ONOS instance - PASS
- 2.16 Checking if ONOS CLI is ready - PASS
- 2.17 Checking ONOS nodes - PASS
- 2.18 Check whether the flow count is bigger than 350 - FAIL
- Flow count looks wrong: False
- 2.19 Check whether all flow status are ADDED - PASS
- 2.20 Connectivity for [u'h1', u'h2', u'h3', u'h4', u'h5', u'h6', u'h7', u'h8'] CASE3_Recovery - FAIL
- 2.21 Connectivity for [u'olt10', u'vsg10'] CASE3_Recovery - FAIL
- 2.22 Connectivity for [u'olt5', u'vsg5'] CASE3_Recovery - FAIL
Case 3: ONOS Failure test with single switch - FAIL
- 3.1 Create and Apply cell file - PASS
- 3.2 Create and Install ONOS package - PASS
- 3.3 Starting ONOS service - PASS
- 3.4 Checking if ONOS CLI is ready - PASS
- 3.5 Starting Mininet Topology - PASS
- 3.6 Check whether the flow count is bigger than 15 - FAIL
- Flow count looks wrong: False
- 3.7 Check whether all flow status are ADDED - PASS
- 3.8 Connectivity for [u'h1', u'h2'] CASE3 - FAIL
- 3.9 Connectivity for [u'olt10', u'vsg10'] CASE3 - FAIL
- 3.10 Connectivity for [u'olt5', u'vsg5'] CASE3 - FAIL
- 3.11 Killing ONOS instance - PASS
- 3.12 Connectivity for [u'h1', u'h2'] CASE3_Failure - FAIL
- 3.13 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure - FAIL
- 3.14 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure - FAIL
- 3.15 Recovering ONOS instance - PASS
- 3.16 Checking if ONOS CLI is ready - PASS
- 3.17 Checking ONOS nodes - PASS
- 3.18 Check whether the flow count is bigger than 15 - FAIL
- Flow count looks wrong: False
- 3.19 Check whether all flow status are ADDED - PASS
- 3.20 Connectivity for [u'h1', u'h2'] CASE3_Failure - FAIL
- 3.21 Connectivity for [u'olt10', u'vsg10'] CASE3_Failure - FAIL
- 3.22 Connectivity for [u'olt5', u'vsg5'] CASE3_Failure - FAIL