commit e9c0c6e49e6ad4282a9200b769e0d3e1ead47163 (HEAD, origin/master, origin/HEAD, master)
Author: Jonathan Hart [jono@opennetworking.org]
AuthorDate: Wed Aug 9 16:44:13 2017 -0700
Commit: Ray Milkey [ray@opennetworking.org]
CommitDate: Thu Aug 10 00:16:15 2017 +0000

Remove dependencies from EVPN route system on unicast route system.

Case 1: Pull onos branch and build onos on Teststation. - PASS

For loading from params file, and pull and build the latest ONOS package

• 1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - FAIL

Set up ONOS with 1 node(s) ONOS cluster

• 2.1 Apply cell to environment - PASS
• 2.2 Uninstalling ONOS package - PASS
• 2.3 Creating ONOS package - PASS
• 2.4 Installing ONOS package - PASS
• 2.5 Set up ONOS secure SSH - PASS
• 2.6 Checking ONOS service - PASS
• 2.7 Starting ONOS CLI sessions - PASS
• 2.8 Checking that ONOS is ready - PASS
• 2.9 setup the ipv6NeighbourDiscovery - FAIL
• Failed to cfg set ipv6NeighborDiscovery

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

• 11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

• 12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

• 13.1 Discover all hosts using pingall - PASS

Case 16: Balance mastership of switches - PASS

• 16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 1000.1 IPV6: Add host intents between h1 and h9 - PASS
• 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
• 1000.3 1HOP: Add host intents between h1 and h3 - FAIL
• 1HOP: Host intent test failed between twohost using IPV6 in the same switch
• 1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS
• 2000.2 IPV6: Add point intents between h1 and h9 - FAIL
• Assertion Result for IPV6 point intent
• Initial Flow Count Passed
• Initial Flow State Passed
• Initial Ping6all Failed
• Link Down Passed
• Link Down Topology State Passed
• Link Down Ping6all Failed
• Link Down Intent State Passed
• Link Up Passed
• Link Up Topology State Passed
• Link Up Ping6all Failed
• Link Up Intent State Passed
• Remove Intents Passed
• 2000.3 IPV6_2: Add point intents between h1 and h9 - PASS
• 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-ICMP IPV6 using ICMP point intents
• Initial Flow Count Passed
• Initial Flow State Passed
• Initial Ping6all Failed
• Remove Intents Passed
• 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL
• Assertion Result for SDNIP-TCP IPV6 using TCP point intents
• Initial Flow Count Passed
• Initial Flow State Passed
• Initial Iperf6 Failed
• Remove Intents Passed
• 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
• 2000.7 VLAN: Add point intents between h5 and h24 - PASS
• 2000.8 1HOP: Add point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 3000.1 NOOPTION: Add single point to multi point intents - PASS
• 3000.2 IPV6: Add single point to multi point intents - PASS
• 3000.3 IPV6_2: Add single point to multi point intents - PASS
• 3000.4 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

• 4000.1 NOOPTION: Add multi point to single point intents - PASS
• 4000.2 IPV6: Add multi point to single point intents - PASS
• 4000.3 IPV6_2: Add multi point to single point intents - PASS
• 4000.4 VLAN: Add multi point to single point intents - FAIL
• Assertion results for IPV6 multi to single point intent with IPV6 type and no MAC addresses in the same VLAN
• Initial Flow Count Passed
• Initial Flow State Passed
• Initial Ping6all Failed
• Remove Intents Passed

Case 5000: Test host mobility with host intents - No Result