View Source

FUNCipv6Intent at 10 Aug 2017 20:16:21

commit e2d9dc732099427b4f7647afabd1e010e6096606 (HEAD, origin/master, origin/HEAD, master)
Author: Simon Hunt [simon@opennetworking.org]
AuthorDate: Thu Aug 10 15:21:04 2017 -0700
Commit: Simon Hunt [simon@opennetworking.org]
CommitDate: Thu Aug 10 19:05:00 2017 -0700

ONOS-6730: Topo View i18n for:

Case 1: Pull onos branch and build onos on Teststation. - PASS

For loading from params file, and pull and build the latest ONOS package

1.1 Constructing test variables - PASS

Case 2: Starting up 1 node(s) ONOS cluster - FAIL

Set up ONOS with 1 node(s) ONOS cluster

2.1 Apply cell to environment - PASS
2.2 Uninstalling ONOS package - PASS
2.3 Creating ONOS package - PASS
2.4 Installing ONOS package - PASS
2.5 Set up ONOS secure SSH - PASS
2.6 Checking ONOS service - PASS
2.7 Starting ONOS CLI sessions - PASS
2.8 Checking that ONOS is ready - PASS
2.9 setup the ipv6NeighbourDiscovery - FAIL

Failed to cfg set ipv6NeighborDiscovery

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

11.1 Starting Mininet topology with OF 1.3 switches - PASS

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

12.1 Assigning switches to controllers - PASS

Case 13: Discover all hosts - PASS

13.1 Discover all hosts using pingall - PASS

Case 16: Balance mastership of switches - PASS

16.1 Balancing mastership of switches - PASS

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

1000.1 IPV6: Add host intents between h1 and h9 - PASS
1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
1000.3 1HOP: Add host intents between h1 and h3 - PASS
1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case will test point to point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS
2000.2 IPV6: Add point intents between h1 and h9 - FAIL

Assertion Result for IPV6 point intent
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Failed
Link Down Passed
Link Down Topology State Passed
Link Down Ping6all Failed
Link Down Intent State Passed
Link Up Passed
Link Up Topology State Passed
Link Up Ping6all Failed
Link Up Intent State Passed
Remove Intents Passed

2000.3 IPV6_2: Add point intents between h1 and h9 - PASS
2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-ICMP IPV6 using ICMP point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Ping6all Failed
Remove Intents Passed

2000.5 SDNIP-TCP: Add point intents between h1 and h9 - FAIL

Assertion Result for SDNIP-TCP IPV6 using TCP point intents
Initial Flow Count Passed
Initial Flow State Passed
Initial Iperf6 Failed
Remove Intents Passed

2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
2000.7 VLAN: Add point intents between h5 and h24 - PASS
2000.8 1HOP: Add point intents between h1 and h9 - PASS

Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - PASS

This test case will test single point to multi point intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

3000.1 NOOPTION: Add single point to multi point intents - PASS
3000.2 IPV6: Add single point to multi point intents - PASS
3000.3 IPV6_2: Add single point to multi point intents - PASS
3000.4 VLAN: Add single point to multi point intents - PASS

Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - FAIL