FUNCipv6Intent at 08 Oct 2017 11:40:49
commit 6fb6554bbd6c89cb08f538f4c5df6d4ecb6ec108 (HEAD, origin/onos-1.10, onos-1.10)
Author: Ray Milkey [ray@opennetworking.org]
AuthorDate: Tue Oct 3 20:56:39 2017 +0000
Commit: Ray Milkey [ray@opennetworking.org]
CommitDate: Tue Oct 3 21:02:37 2017 +0000
Revert "[WIP] Block ConfigFileBasedClusterMetadataProvider until valid configuration is found."
--
This reverts commit fd2e126aef3854292f4c6f786109f45f6e843fe7.
Change-Id: I21a8336fea75bb787a75f4bd2ee87ce6370b2086
Case 1: Constructing test variables and building ONOS package - PASS
This test case is mainly for loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Set up ONOS secure SSH - PASS
- 2.6 Starting ONOS service - PASS
- 2.7 Start ONOS cli - PASS
- 2.8 Checking that ONOS is ready - PASS
- 2.9 setup the ipv6NeighbourDiscovery - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Discover all hosts - PASS
- 13.1 Discover all hosts using pingall - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - PASS
This test case tests Host intents using 1 node(s) cluster;
Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc;
The test will use OF 1.3 OVS running in Mininet
- 1000.1 IPV6: Add host intents between h1 and h9 - PASS
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - PASS
- 1000.3 1HOP: Add host intents between h1 and h3 - PASS
- 1000.4 VLAN: Add vlan host intents between h5 and h24 - PASS
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - PASS
This test case will test point to point intents using 1 node(s) cluster;
Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc;
The test will use OF 1.3 OVS running in Mininet
- 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - PASS
- 2000.2 IPV6: Add point intents between h1 and h9 - PASS
- 2000.3 IPV6_2: Add point intents between h1 and h9 - PASS
- 2000.4 SDNIP-ICMP: Add point intents between h1 and h9 - PASS
- 2000.5 SDNIP-TCP: Add point intents between h1 and h9 - PASS
- 2000.6 DUALSTACK1: Add point intents between h3 and h11 - PASS
- 2000.7 VLAN: Add point intents between h5 and h24 - PASS
- 2000.8 1HOP: Add point intents between h1 and h9 - PASS
Case 3000: Single to Multi Point Intents Test - 1 NODE(S) - OF 1.3 - PASS
This test case will test single point to multi point intents using 1 node(s) cluster;
Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc;
The test will use OF 1.3 OVS running in Mininet
- 3000.1 NOOPTION: Add single point to multi point intents - PASS
- 3000.2 IPV6: Add single point to multi point intents - PASS
- 3000.3 IPV6_2: Add single point to multi point intents - PASS
- 3000.4 VLAN: Add single point to multi point intents - PASS
Case 4000: Multi To Single Point Intents Test - 1 NODE(S) - OF 1.3 - PASS
This test case will test single point to multi point intents using 1 node(s) cluster;
Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc;
The test will use OF 1.3 OVS running in Mininet
- 4000.1 NOOPTION: Add multi point to single point intents - PASS
- 4000.2 IPV6: Add multi point to single point intents - PASS
- 4000.3 IPV6_2: Add multi point to single point intents - PASS
- 4000.4 VLAN: Add multi point to single point intents - PASS
Case 5000: Test host mobility with host intents - PASS
- 5000.1 Testing host mobility by moving h1 from s5 to s6 - PASS
- 5000.2 IPV6: Add host intents between h1 and h9 - PASS
Case 6000: Test Single to Multiple End Point Failure - PASS
- 6000.1 NOOPTION: test end point failure for multi point to single point intents - PASS
- 6000.2 IPV6: test end point failure for multi point to single point intents - PASS
- 6000.3 IPV6_2: test end point faliure for multi point to single point intents - PASS
- 6000.4 VLAN: test end point failure for multi point to single point intents - PASS
- 6000.5 NOOPTION: test end point failure for single point to multi point intents - PASS
- 6000.6 IPV6: test end point failure for single point to multi point intents - PASS
- 6000.7 IPV6_2: test end point failure for single point to multi point intents - PASS
- 6000.8 VLAN: test end point failure for single point to multi point intents - PASS
Case 14: Stop Mininet topology - PASS
Stopping the current mininet topology to start up fresh
- 14.1 Stopping Mininet Topology - PASS