SCPFscaleTopo at 10 Nov 2015 02:23:02
Case 1: Constructing test variables - PASS
- 1.1 Constructing test variables - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Starting up Mininet and verifying topology - FAIL
Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS
- 10.1 Starting up TORUS 5x5 topology - PASS
- 10.2 Pinging all hosts - FAIL
- 10.3 Comparing MN topology to ONOS topology - PASS
Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 5x5 - FAIL
Balance masters to make sure each controller has some devices and stop ONOS node 3 service.
- 100.1 Balancing Masters - PASS
- 100.2 Pinging all hosts - FAIL
- 100.3 Bringing down node 3 - PASS
Case 11: Verifying topology: TORUS 5x5 - FAIL
Pinging all hosts andcomparing topology elements between Mininet and ONOS
- 11.1 Pinging all hosts - FAIL
- 11.2 Comparing MN topology to ONOS topology - PASS
Case 200: Bring ONOS node 3 up and balance masters: TORUS 5x5 - PASS
Bring node 3 back up and balance the masters
- 200.1 Balancing Masters - PASS
Case 11: Verifying topology: TORUS 5x5 - FAIL
Pinging all hosts andcomparing topology elements between Mininet and ONOS
- 11.1 Pinging all hosts - FAIL
- 11.2 Comparing MN topology to ONOS topology - PASS
Case 1000: Checking logs for errors, warnings, and exceptions - PASS
Case 10: Starting up Mininet and verifying topology - FAIL
Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS
- 10.1 Starting up TORUS 10x10 topology - PASS
- 10.2 Pinging all hosts - FAIL
- 10.3 Comparing MN topology to ONOS topology - PASS
Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 10x10 - FAIL
Balance masters to make sure each controller has some devices and stop ONOS node 3 service.
- 100.1 Balancing Masters - PASS
- 100.2 Pinging all hosts - FAIL
- 100.3 Bringing down node 3 - PASS
Case 11: Verifying topology: TORUS 10x10 - FAIL
Pinging all hosts andcomparing topology elements between Mininet and ONOS
- 11.1 Pinging all hosts - FAIL
- 11.2 Comparing MN topology to ONOS topology - PASS
Case 200: Bring ONOS node 3 up and balance masters: TORUS 10x10 - PASS
Bring node 3 back up and balance the masters
- 200.1 Balancing Masters - PASS
Case 11: Verifying topology: TORUS 10x10 - FAIL
Pinging all hosts andcomparing topology elements between Mininet and ONOS
- 11.1 Pinging all hosts - FAIL
- 11.2 Comparing MN topology to ONOS topology - PASS
Case 1000: Checking logs for errors, warnings, and exceptions - PASS
Case 10: Starting up Mininet and verifying topology - FAIL
Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS
- 10.1 Starting up TORUS 20x20 topology - PASS
- 10.2 Pinging all hosts - FAIL
- 10.3 Comparing MN topology to ONOS topology - PASS
Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 20x20 - FAIL
Balance masters to make sure each controller has some devices and stop ONOS node 3 service.
- 100.1 Balancing Masters - PASS
- 100.2 Pinging all hosts - FAIL
- 100.3 Bringing down node 3 - PASS
Case 11: Verifying topology: TORUS 20x20 - FAIL
Pinging all hosts andcomparing topology elements between Mininet and ONOS
- 11.1 Pinging all hosts - FAIL
- 11.2 Comparing MN topology to ONOS topology - PASS
Case 200: Bring ONOS node 3 up and balance masters: TORUS 20x20 - FAIL
Bring node 3 back up and balance the masters
- 200.1 Balancing Masters - FAIL
- Failed to balance masters
Case 11: Verifying topology: TORUS 20x20 - FAIL
Pinging all hosts andcomparing topology elements between Mininet and ONOS
- 11.1 Pinging all hosts - FAIL
- 11.2 Comparing MN topology to ONOS topology - PASS
Case 1000: Checking logs for errors, warnings, and exceptions - PASS