FUNCoptical at 08 Dec 2015 23:52:24
commit 2156461ee9c69a26c395c955825ca3ee899c497b (HEAD, origin/master, origin/HEAD, master)
Author: Brian O'Connor [bocon@onlab.us]
AuthorDate: Sat Dec 5 19:24:59 2015 -0800
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Wed Dec 9 00:50:04 2015 +0000
ONOS-3529 Updating FlowEntryBuilder to avoid calling getTable on OF_1.0 messages
Case 1: Constructing test variables and building ONOS package - PASS
This test case is mainly for loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Mininet with Linc-OE startup - PASS
Start opticalTest.py topology included with ONOS
- 10.1 Starting mininet and LINC-OE - PASS
Case 21: Running Pingall - PASS
Use pingall to discover all hosts. Pingall is expected to fail.
- 21.1 Discover Hosts through Pingall - PASS
Case 22: Discover Hosts with arping - PASS
Send arpings between all the hosts to discover and verify them
- 22.1 Send arping between all hosts - PASS
Case 23: Compare ONOS Topology view to Mininet topology - FAIL
Compare topology elements between Mininet and ONOS
- 23.1 Comparing Mininet topology to ONOS topology - FAIL
- ONOS incorrectly discovered the topology
Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL
This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts
- 31.1 Adding point intents - FAIL
- Failed to add point intents
- Skipping the rest of this case.
Case 32: Test add host intents between optical layer host - FAIL
Test host intents between 2 optical layer host
- 32.1 Adding host intents to h1 and h2 - FAIL
- Some of the intents are not in INSTALLED state
- 32.2 Removing host intents - FAIL
- Failed to remove host intents
Case 14: Stop Mininet topology - PASS
Stopping the current mininet topology to start up fresh
- 14.1 Stopping Mininet Topology - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Mininet with Linc-OE startup - PASS
Start opticalTest.py topology included with ONOS
- 10.1 Starting mininet and LINC-OE - PASS
Case 21: Running Pingall - PASS
Use pingall to discover all hosts. Pingall is expected to fail.
- 21.1 Discover Hosts through Pingall - PASS
Case 22: Discover Hosts with arping - PASS
Send arpings between all the hosts to discover and verify them
- 22.1 Send arping between all hosts - PASS
Case 23: Compare ONOS Topology view to Mininet topology - FAIL
Compare topology elements between Mininet and ONOS
- 23.1 Comparing Mininet topology to ONOS topology - FAIL
- ONOS incorrectly discovered the topology
Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL
This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts
- 31.1 Adding point intents - FAIL
- Failed to add point intents
- Skipping the rest of this case.
Case 32: Test add host intents between optical layer host - FAIL
Test host intents between 2 optical layer host
- 32.1 Adding host intents to h1 and h2 - FAIL
- Some of the intents are not in INSTALLED state
- 32.2 Removing host intents - FAIL
- Failed to remove host intents
Case 14: Stop Mininet topology - PASS
Stopping the current mininet topology to start up fresh
- 14.1 Stopping Mininet Topology - PASS