FUNCoptical at 13 Dec 2015 01:24:07
commit 4aded4c8b7ee32d4331cb17799703679b31975da (HEAD, tag: 1.4.0-rc2)
Author: Brian O'Connor [bocon@onlab.us]
AuthorDate: Fri Dec 11 16:55:13 2015 -0800
Commit: Brian O'Connor [bocon@onlab.us]
CommitDate: Fri Dec 11 16:55:13 2015 -0800
Tagging 1.4.0-rc2
Case 1: Constructing test variables and building ONOS package - PASS
This test case is mainly for loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Mininet with Linc-OE startup - PASS
Start opticalTest.py topology included with ONOS
- 10.1 Starting mininet and LINC-OE - PASS
Case 21: Running Pingall - PASS
Use pingall to discover all hosts. Pingall is expected to fail.
- 21.1 Discover Hosts through Pingall - PASS
Case 22: Discover Hosts with arping - PASS
Send arpings between all the hosts to discover and verify them
- 22.1 Send arping between all hosts - PASS
Case 23: Compare ONOS Topology view to Mininet topology - PASS
Compare topology elements between Mininet and ONOS
- 23.1 Comparing Mininet topology to ONOS topology - PASS
Case 31: Install point intents between 2 packet layer device and ping the hosts - PASS
This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts
- 31.1 Adding point intents - PASS
- 31.2 Ping h1 and h5 - PASS
Case 32: Test add host intents between optical layer host - FAIL
Test host intents between 2 optical layer host
- 32.1 Adding host intents to h1 and h2 - FAIL
- Some of the intents are not in INSTALLED state
- 32.2 Removing host intents - FAIL
- Failed to remove host intents
Case 14: Stop Mininet topology - PASS
Stopping the current mininet topology to start up fresh
- 14.1 Stopping Mininet Topology - PASS
Case 2: Starting up 3 node(s) ONOS cluster - PASS
Set up ONOS with 3 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
Case 10: Mininet with Linc-OE startup - PASS
Start opticalTest.py topology included with ONOS
- 10.1 Starting mininet and LINC-OE - PASS
Case 21: Running Pingall - PASS
Use pingall to discover all hosts. Pingall is expected to fail.
- 21.1 Discover Hosts through Pingall - PASS
Case 22: Discover Hosts with arping - PASS
Send arpings between all the hosts to discover and verify them
- 22.1 Send arping between all hosts - PASS
Case 23: Compare ONOS Topology view to Mininet topology - PASS
Compare topology elements between Mininet and ONOS
- 23.1 Comparing Mininet topology to ONOS topology - PASS
Case 31: Install point intents between 2 packet layer device and ping the hosts - PASS
This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts
- 31.1 Adding point intents - PASS
- 31.2 Ping h1 and h5 - PASS
Case 32: Test add host intents between optical layer host - FAIL
Test host intents between 2 optical layer host
- 32.1 Adding host intents to h1 and h2 - PASS
- 32.2 Pinging h1 and h2 - FAIL
- Pinged failed between h1 and h2
- 32.3 Removing host intents - FAIL
- Failed to remove host intents
Case 14: Stop Mininet topology - PASS
Stopping the current mininet topology to start up fresh
- 14.1 Stopping Mininet Topology - PASS