Case 100: - PASS

• 100.1 Starting Mininet Topology - PASS
• 100.2 Connect switches to controller - PASS
• 100.3 Set up tunnel from Mininet node to onos node - PASS

commit dd415c31d8a0d57fbe4a3ab721e2a95d7afa4495 (HEAD, origin/onos-1.3, onos-1.3)
Author: Jonathan Hart [jono@onlab.us]
AuthorDate: Mon Nov 16 10:56:20 2015 -0800
Commit: Jonathan Hart [jono@onlab.us]
CommitDate: Mon Nov 16 14:14:24 2015 -0800

Protect against exceptions thrown in application's packet processors.

Case 101: Setting up test environment - PASS

• 101.1 Applying cell variable to environment - PASS
• 101.2 Creating ONOS package - PASS
• 101.3 Installing ONOS package - PASS
• 101.4 Checking if ONOS is up yet - PASS
• 101.5 Checking if ONOS CLI is ready - PASS
• 101.6 Activate sdn-ip application - PASS

Case 102: Loading methods from other Python file - PASS

Case 1: Ping tests between BGP peers and speakers - PASS

• 1.1 BGP speakers ping peers, expect all tests to succeed - PASS

Case 2: Check point-to-point intents - PASS

• 2.1 Check P2P intents number from ONOS CLI - PASS

Case 3: Check routes and M2S intents to all BGP peers - PASS

• 3.1 Check routes installed - PASS
• 3.2 Check M2S intents installed - PASS
• 3.3 Check whether all flow status are ADDED - PASS

Case 4: Ping test for each route, all hosts behind BGP peers - PASS

• 4.1 Check ping between each host pair - PASS

Case 5: Bring down links and check routes/intents - PASS

• 5.1 Bring down the link between sw32 and peer64514 - PASS
• 5.2 Check routes installed - PASS
• 5.3 Check M2S intents installed - PASS
• 5.4 Bring down the link between sw8 and peer64515 - PASS
• 5.5 Check routes installed - PASS
• 5.6 Check M2S intents installed - PASS
• 5.7 Bring down the link between sw28 and peer64516 - PASS
• 5.8 Check routes installed - PASS
• 5.9 Check M2S intents installed - PASS
• 5.10 Check whether all flow status are ADDED - PASS
• 5.11 BGP speakers ping peers, expect all tests to fail - PASS
• 5.12 Check ping between each host pair - PASS

Case 6: Bring up links and check routes/intents - PASS

• 6.1 Bring up the link between sw32 and peer64514 - PASS
• 6.2 Check routes installed - PASS
• 6.3 Check M2S intents installed - PASS
• 6.4 Bring up the link between sw8 and peer64515 - PASS
• 6.5 Check routes installed - PASS
• 6.6 Check M2S intents installed - PASS
• 6.7 Bring up the link between sw28 and peer64516 - PASS
• 6.8 Check routes installed - PASS
• 6.9 Check M2S intents installed - PASS
• 6.10 Check whether all flow status are ADDED - PASS
• 6.11 BGP speakers ping peers, expect all tests to succeed - PASS
• 6.12 Check ping between each host pair - PASS

Case 7: Stop edge sw32,check P-2-P and M-2-S intents, ping test - PASS

• 7.1 Stop sw32 - PASS
• 7.2 Check routes installed - PASS
• 7.3 Check M2S intents installed - PASS
• 7.4 Check P2P intents installed - PASS
• 7.5 Check ping between hosts behind BGP peers - PASS
• 7.6 Check ping between BGP peers and speakers - PASS
• 7.7 Check whether all flow status are ADDED - PASS

Case 8: Start the edge sw32, check P-2-P and M-2-S intents, ping test - PASS

• 8.1 Start sw32 - PASS
• 8.2 Check routes installed - PASS
• 8.3 Check M2S intents installed - PASS
• 8.4 Check P2P intents installed - PASS
• 8.5 Check whether all flow status are ADDED - PASS
• 8.6 BGP speakers ping peers, expect all tests to succeed - PASS
• 8.7 Check ping between each host pair - PASS

Case 9: Stop sw11 located in best path, check route number, P2P intent number, M2S intent number, ping test - PASS

• 9.1 Check flow entry number in sw11 - PASS
• 9.2 Check flow entry number in sw1 - PASS
• 9.3 Check flow entry number in sw7 - PASS
• 9.4 Stop sw11 - PASS
• 9.5 Check routes installed - PASS
• 9.6 Check M2S intents installed - PASS
• 9.7 Check P2P intents installed - PASS
• 9.8 Check whether all flow status are ADDED - PASS
• 9.9 BGP speakers ping peers, expect all tests to succeed - PASS
• 9.10 Check ping between each host pair - PASS

Case 10: Start sw11 which was stopped in CASE9, check route number, P2P intent number, M2S intent number, ping test - PASS

• 10.1 Check flow entry number in sw1 - PASS
• 10.2 Check flow entry number in sw7 - PASS
• 10.3 Start sw11 - PASS
• 10.4 Check routes installed - PASS
• 10.5 Check M2S intents installed - PASS
• 10.6 Check P2P intents installed - PASS
• 10.7 Check whether all flow status are ADDED - PASS
• 10.8 BGP speakers ping peers, expect all tests to succeed - PASS
• 10.9 Check ping between each host pair - PASS