![HAbackupRecover](https://jenkins.onosproject.org/view/QA/job/postjob-VM/lastSuccessfulBuild/artifact/HAbackupRecover_master_20-builds_graph.jpg)
commit 6f0171362126864449cbd4eafc7cbf17635e02a0 (HEAD -] master, origin/master, origin/HEAD)
Author: Patryk Konopka [p.konopka2@samsung.com]
AuthorDate: Tue Nov 21 10:44:25 2017 +0100
Commit: Thomas Vachuska [tom@opennetworking.org]
CommitDate: Thu Apr 12 21:56:20 2018 +0000
[ONOS-7239] Fix - ModArp*Instruction not serialized in KryoNamespaces
Case 1: Starting up 7 node(s) ONOS cluster - PASS
Set up ONOS with 7 node(s) ONOS cluster
- 1.1 Constructing test variables - PASS
- 1.2 Apply cell to environment - PASS
- 1.3 Uninstalling ONOS package - PASS
- 1.4 Starting Mininet - PASS
- 1.5 Creating ONOS package - PASS
- 1.6 Installing ONOS package - PASS
- 1.7 Set up ONOS secure SSH - PASS
- 1.8 Checking ONOS service - PASS
- 1.9 Starting ONOS CLI sessions - PASS
- 1.10 Checking ONOS nodes - PASS
- 1.11 Activate apps defined in the params file - No Result
- 1.12 Set ONOS configurations - PASS
- 1.13 Check app ids - PASS
- 1.14 Set logging levels - PASS
Case 2: Assigning devices to controllers - PASS
Assign switches to ONOS using 'ovs-vsctl' and check that an ONOS node becomes the master of the device.
- 2.1 Assign switches to controllers - PASS
Case 8: Compare ONOS Topology view to Mininet topology - PASS
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 21: Assigning Controller roles for switches - PASS
Check that ONOS is connected to each device. Then manually assign mastership to specific ONOS nodes using 'device-role'
- 21.1 Assign mastership of switches to specific controllers - PASS
- 21.2 Check mastership was correctly assigned - PASS
Case 3: Adding host Intents - PASS
Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED
- 3.1 Install reactive forwarding app - PASS
- 3.2 Check app ids - PASS
- 3.3 Discovering Hosts( Via pingall for now ) - PASS
- 3.4 Uninstall reactive forwarding app - PASS
- 3.5 Check app ids - PASS
- 3.6 Add host intents via cli - PASS
- 3.7 Intent Anti-Entropy dispersion - PASS
Case 8: Compare ONOS Topology view to Mininet topology - PASS
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
Case 5: Setting up and gathering data for current state - PASS
- 5.1 Check that each switch has a master - PASS
- 5.2 Get the Mastership of each switch from each controller - No Result
- 5.3 Read device roles from ONOS - PASS
- 5.4 Check for consistency in roles from each controller - PASS
- 5.5 Get the intents from each controller - PASS
- 5.6 Check for consistency in Intents from each controller - PASS
- 5.7 Get the flows from each controller - PASS
- 5.8 Check for consistency in Flows from each controller - PASS
- 5.9 Get the OF Table entries - No Result
- 5.10 Start continuous pings - No Result
- 5.11 Collecting topology information from ONOS - No Result
- 5.12 Host view is consistent across ONOS nodes - PASS
- 5.13 Each host has an IP address - PASS
- 5.14 Cluster view is consistent across ONOS nodes - PASS
- 5.15 Cluster view correct across ONOS nodes - PASS
- 5.16 Comparing ONOS topology to MN - PASS
- 5.17 Device information is correct - PASS
- 5.18 Links are correct - PASS
- 5.19 Hosts are correct - PASS
Case 14: Start Leadership Election app - PASS
- 14.1 Install leadership election app - PASS
- 14.2 Run for election on each node - PASS
- 14.3 Active node was elected leader? - PASS
Case 15: Check that Leadership Election is still functional - PASS
- 15.1 Run for election on each node - PASS
- 15.2 Check that each node shows the same leader and candidates - PASS
- 15.3 Find current leader and withdraw - PASS
- 15.4 Check that a new node was elected leader - PASS
- 15.5 Check that that new leader was the candidate of old leader - PASS
- 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS
- 15.7 Check that oldLeader is a candidate, and leader if only 1 node - No Result
Case 16: Install Primitives app - PASS
- 16.1 Install Primitives app - PASS
Case 17: Check for basic functionality with distributed primitives - PASS
Test the methods of the distributed primitives (counters and sets) throught the cli
- 17.1 Increment then get a default counter on each node - PASS
- 17.2 Get then Increment a default counter on each node - PASS
- 17.3 Counters we added have the correct values - PASS
- 17.4 Add -8 to then get a default counter on each node - PASS
- 17.5 Add 5 to then get a default counter on each node - PASS
- 17.6 Get then add 5 to a default counter on each node - PASS
- 17.7 Counters we added have the correct values - PASS
- 17.8 Distributed Set get - PASS
- 17.9 Distributed Set size - PASS
- 17.10 Distributed Set add() - PASS
- 17.11 Distributed Set addAll() - PASS
- 17.12 Distributed Set contains() - PASS
- 17.13 Distributed Set containsAll() - PASS
- 17.14 Distributed Set remove() - PASS
- 17.15 Distributed Set removeAll() - PASS
- 17.16 Distributed Set addAll() - PASS
- 17.17 Distributed Set clear() - PASS
- 17.18 Distributed Set addAll() - PASS
- 17.19 Distributed Set retain() - PASS
- 17.20 Partitioned Transactional maps put - PASS
- 17.21 Partitioned Transactional maps get - PASS
- 17.22 Get the value of a new value - PASS
- 17.23 Atomic Value set() - PASS
- 17.24 Get the value after set() - PASS
- 17.25 Atomic Value compareAndSet() - PASS
- 17.26 Get the value after compareAndSet() - PASS
- 17.27 Atomic Value getAndSet() - PASS
- 17.28 Get the value after getAndSet() - PASS
- 17.29 Atomic Value destory() - PASS
- 17.30 Get the value after destroy() - PASS
- 17.31 Work Queue add() - PASS
- 17.32 Check the work queue stats - PASS
- 17.33 Work Queue addMultiple() - PASS
- 17.34 Check the work queue stats - PASS
- 17.35 Work Queue takeAndComplete() 1 - PASS
- 17.36 Check the work queue stats - PASS
- 17.37 Work Queue takeAndComplete() 2 - PASS
- 17.38 Check the work queue stats - PASS
- 17.39 Work Queue destroy() - PASS
- 17.40 Check the work queue stats - PASS
Case 6: Restart entire ONOS cluster with backed up state - PASS
- 6.1 Backup ONOS data - PASS
- 6.2 Checking ONOS Logs for errors - No Result
- 6.3 Uninstalling ONOS package - PASS
- 6.4 Installing ONOS package - PASS
- 6.5 Restore ONOS data - PASS
- 6.6 Restart ONOS nodes - No Result
- 6.7 Set up ONOS secure SSH - PASS
- 6.8 Checking ONOS service - PASS
- 6.9 Starting ONOS CLI sessions - PASS
Case 8: Compare ONOS Topology view to Mininet topology - PASS
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 3: Adding host Intents - PASS
Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED
- 3.1 Install reactive forwarding app - PASS
- 3.2 Check app ids - PASS
- 3.3 Discovering Hosts( Via pingall for now ) - PASS
- 3.4 Uninstall reactive forwarding app - PASS
- 3.5 Check app ids - PASS
- 3.6 Add host intents via cli - PASS
- 3.7 Intent Anti-Entropy dispersion - PASS
Case 7: Running ONOS Constant State Tests - PASS
- 7.1 Check that each switch has a master - PASS
- 7.2 Read device roles from ONOS - PASS
- 7.3 Check for consistency in roles from each controller - PASS
- 7.4 Get the intents from each controller - PASS
- 7.5 Check for consistency in Intents from each controller - PASS
- 7.6 Leadership Election is still functional - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
Case 15: Check that Leadership Election is still functional - PASS
- 15.1 Run for election on each node - PASS
- 15.2 Check that each node shows the same leader and candidates - PASS
- 15.3 Find current leader and withdraw - PASS
- 15.4 Check that a new node was elected leader - PASS
- 15.5 Check that that new leader was the candidate of old leader - PASS
- 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS
- 15.7 Check that oldLeader is a candidate, and leader if only 1 node - No Result
Case 17: Check for basic functionality with distributed primitives - PASS
Test the methods of the distributed primitives (counters and sets) throught the cli
- 17.1 Increment then get a default counter on each node - PASS
- 17.2 Get then Increment a default counter on each node - PASS
- 17.3 Counters we added have the correct values - PASS
- 17.4 Add -8 to then get a default counter on each node - PASS
- 17.5 Add 5 to then get a default counter on each node - PASS
- 17.6 Get then add 5 to a default counter on each node - PASS
- 17.7 Counters we added have the correct values - PASS
- 17.8 Distributed Set get - PASS
- 17.9 Distributed Set size - PASS
- 17.10 Distributed Set add() - PASS
- 17.11 Distributed Set addAll() - PASS
- 17.12 Distributed Set contains() - PASS
- 17.13 Distributed Set containsAll() - PASS
- 17.14 Distributed Set remove() - PASS
- 17.15 Distributed Set removeAll() - PASS
- 17.16 Distributed Set addAll() - PASS
- 17.17 Distributed Set clear() - PASS
- 17.18 Distributed Set addAll() - PASS
- 17.19 Distributed Set retain() - PASS
- 17.20 Partitioned Transactional maps put - PASS
- 17.21 Partitioned Transactional maps get - PASS
- 17.22 Get the value of a new value - PASS
- 17.23 Atomic Value set() - PASS
- 17.24 Get the value after set() - PASS
- 17.25 Atomic Value compareAndSet() - PASS
- 17.26 Get the value after compareAndSet() - PASS
- 17.27 Atomic Value getAndSet() - PASS
- 17.28 Get the value after getAndSet() - PASS
- 17.29 Atomic Value destory() - PASS
- 17.30 Get the value after destroy() - PASS
- 17.31 Work Queue add() - PASS
- 17.32 Check the work queue stats - PASS
- 17.33 Work Queue addMultiple() - PASS
- 17.34 Check the work queue stats - PASS
- 17.35 Work Queue takeAndComplete() 1 - PASS
- 17.36 Check the work queue stats - PASS
- 17.37 Work Queue takeAndComplete() 2 - PASS
- 17.38 Check the work queue stats - PASS
- 17.39 Work Queue destroy() - PASS
- 17.40 Check the work queue stats - PASS
Case 9: Turn off a link to ensure that Link Discovery is working properly - PASS
- 9.1 Kill Link between s28 and s3 - PASS
Case 8: Compare ONOS Topology view to Mininet topology - PASS
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
Case 10: Restore a link to ensure that Link Discovery is working properly - PASS
- 10.1 Bring link between s28 and s3 back up - PASS
Case 8: Compare ONOS Topology view to Mininet topology - PASS
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
Case 11: Killing a switch to ensure it is discovered correctly - PASS
- 11.1 Kill s5 - PASS
Case 8: Compare ONOS Topology view to Mininet topology - PASS
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
Case 12: Adding a switch to ensure it is discovered correctly - PASS
- 12.1 Add back s5 - PASS
Case 8: Compare ONOS Topology view to Mininet topology - PASS
Compare topology objects between Mininet and ONOS
- 8.1 Comparing ONOS topology to MN topology - PASS
- 8.2 Hosts view is consistent across all ONOS nodes - PASS
- 8.3 Hosts information is correct - PASS
- 8.4 Host attachment points to the network - PASS
- 8.5 Clusters view is consistent across all ONOS nodes - PASS
- 8.6 There is only one SCC - PASS
- 8.7 Device information is correct - PASS
- 8.8 Links are correct - PASS
- 8.9 Hosts are correct - PASS
- 8.10 Checking ONOS nodes - PASS
Case 4: Verify connectivity by sending traffic across Intents - PASS
Ping across added host intents to check functionality and check the state of the intent
- 4.1 Check Intent state - PASS
- 4.2 Ping across added host intents - PASS
- 4.3 Check leadership of topics - PASS
- 4.4 Wait a minute then ping again - PASS
Case 13: Test Cleanup - PASS
- 13.1 Checking raft log size - PASS
- 13.2 Killing tcpdumps - No Result
- 13.3 Checking ONOS Logs for errors - No Result
- 13.4 Stopping Mininet - PASS