Mininet is a container orchestration system for network emulation. With Mininet and onos.py
, you can easily start up an ONOS cluster in a single VM.
Getting Mininet
In order to use onos.py
, you need Mininet. It's easy to install Mininet in an Ubuntu VM or server using apt-get
:
apt-get install mininet
or from source:
git clone http://github.com/mininet/mininet
mininet/util/install.sh -nfv
You can also download a pre-built Mininet VM.
Local Cluster Environment using onos.py
and Mininet
If you are using Mininet in a VM or on a physical server, it is easy to use onos.py
to start up a complete emulated ONOS network, including ONOS cluster, modeled control network, and data network.
This simplifies development on a laptop, because you can run a single development VM (or no VM at all if you are running on a Linux machine!) Moreover, it is more efficient than a multi-VM setup because the entire emulated network lives in a single VM and shares a single Linux kernel.
Chances are you're already using Mininet, so it's nice to be able to start an ONOS cluster using Mininet itself without installing or configuring additional software.
Note: This is work in progress - if you wish to try it now, you will need to get onos.py from the following patch: https://gerrit.onosproject.org/#/c/9143/
First, make sure that you have built ONOS in your Mininet VM or server using buck
:
cd ~/onos
buck build onos
Next, use Mininet and onos.py
to start up a virtual ONOS cluster and data network:
cd ~/onos/tools/dev/mininet
sudo mn --custom onos.py --controller onos,3 --topo torus,4,4
What does this do?
--custom onos.py
: uses onos.py
to extend Mininet with new controller and switch types
--controller onos,3
: tells Mininet to start up an ONOS controller cluster with 3 ONOS nodes
--topo torus,4,4
: tells Mininet to use a 4x4 torus topology for the data network
What software switch does this use?
By default, it uses Open vSwitch. onos.py replaces the default
switch with a new switch class called ONOSOVSSwitch
or --switch onosovs
. This switch class knows how to connect to an ONOS cluster with multiple IP addresses.
How can I use the user switch (or CPqD switch if I have it installed?)
In order to select the user switch (either Stanford reference switch or CPqD switch, depending on which one you have installed), you can use --switch onosuser
.
How can I get more information on Mininet, the mn
command, writing Mininet scripts, etc.?
For more information on Mininet, please check out http://docs.mininet.org
How can I specify the apps for ONOS to load?
For now, try using ONOS_APPS
or connecting to the karaf
console and using ONOS CLI commands. As root:
ONOS_APPS=drivers,openflow,fwd,proxyarp,mobility mn --custom onos.py --controller onos,3 --topo tree,3,3
or (with sudo
):
sudo env ONOS_APPS=drivers,openflow,fwd,proxyarp,mobility mn --custom onos.py --controller onos,3 --topo tree,3,3
or
ONOS_APPS=drivers,openflow,fwd,proxyarp,mobility sudo -E mn --custom onos.py --controller onos,3 --topo tree,3,3
Note that sudo
clears environment variables by default, but the ONOS_APPS
environment variable must be set in order for mn
to read it.
In the future, there should be an option to --controller onos
and/or ONOSCluster()
.
How are IP addresses of the ONOS cluster specified?
ONOSCluster
takes an ipBase
option; default is 192.168.123.0/24
How can I connect to the ONOS console?
Make sure karaf's bin
directory is in your path, then:
client -h 192.168.123.1 # or the address of the ONOS node you wish to connect to
How can I connect to the karaf console using ssh
?
ssh -p 8101 karaf@192.168.123.1
How can I connect to the ONOS GUI if ONOS is running in a Mininet host inside a VM?
One way is to use ssh port forwarding, e.g.
ssh -L 8101:192.168.123.1:8101 mininet-vm
Then open up http://localhost:8101/onos/ui/ in your browser.
Another way is to run a browser such as Firefox or Chromium in your development VM or server.
firefox &
We hope to make it easier and more automatic in the future.
How can I look at the karaf log file for (which usually contains ONOS's log messages) for onos1?
tail -f /tmp/onos1/log
How can I look at the onos-service
log file (which usually doesn't contain much of anything unless there are errors starting karaf) for onos1?
tail -f /tmp/onos1/onos.log
Can I ssh
into the ONOS cluster?
Not directly with this version of onos.py
, since the nodes are not running ssh
by default. However, if you have a Mininet source tree, you can attach to it using mininet/util/m
:
~/mininet/util/mn 192.168.123.1
Can I use the onos-*
scripts from tools/test/bin with this environment?
Not currently, but you should not need to use them for the most part.