Have questions? Stuck? Please check our FAQ for some common questions and answers.

HAsingleInstanceRestart at 05 Nov 2018 04:16:02

HAsingleInstanceRestart

commit 8d6edf3216f7bce64b92852ce8e4efd2be46dcd9 (HEAD -] onos-1.13, origin/onos-1.13)
Author: snehaprem [sneha.prem@infosys.com]
AuthorDate: Thu Nov 1 01:02:21 2018 -0400
Commit: Charles Chan [charles@opennetworking.org]
CommitDate: Fri Nov 2 06:12:21 2018 +0000

route-remove cli command with source type addition
--
(cherry picked from commit 7828d01ca571190c1c3ba526dd24ef6e7399c79c)

Case 1: Constructing test variables and building ONOS package - FAIL

For loading from params file, and pull and build the latest ONOS package

  • 1.1 Constructing test variables - PASS (tick)
  • 1.2 Apply cell to environment - PASS (tick)
  • 1.3 Uninstalling ONOS package - PASS (tick)
  • 1.4 Apply cell to environment - PASS (tick)
  • 1.5 Starting Mininet - PASS (tick)
  • 1.6 Creating ONOS package - PASS (tick)
  • 1.7 Installing ONOS package - PASS (tick)
  • 1.8 Set up ONOS secure SSH - PASS (tick)
  • 1.9 Checking ONOS service - PASS (tick)
  • 1.10 Starting ONOS CLI sessions - PASS (tick)
  • 1.11 Checking ONOS nodes - PASS (tick)
  • 1.12 Checking ONOS applications - FAIL (error)
    • Not all ONOS apps are activated
  • 1.13 Checking ONOS nodes - PASS (tick)
  • 1.14 Activate apps defined in the params file - No Result (warning)
  • 1.15 Set ONOS configurations - PASS (tick)
  • 1.16 Check app ids - PASS (tick)
  • 1.17 Set logging levels - PASS (tick)

Case 2: Assigning devices to controllers - PASS

Assign switches to ONOS using 'ovs-vsctl' and check that an ONOS node becomes the master of the device.

  • 2.1 Assign switches to controllers - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Checking ONOS nodes - PASS (tick)

Case 3: Adding host Intents - PASS

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

  • 3.1 Install reactive forwarding app - PASS (tick)
  • 3.2 Check app ids - PASS (tick)
  • 3.3 Discovering Hosts( Via pingall for now ) - PASS (tick)
  • 3.4 Uninstall reactive forwarding app - PASS (tick)
  • 3.5 Check app ids - PASS (tick)
  • 3.6 Add host intents via cli - PASS (tick)
  • 3.7 Intent Anti-Entropy dispersion - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - PASS (tick)

Case 5: Setting up and gathering data for current state - PASS

  • 5.1 Check that each switch has a master - PASS (tick)
  • 5.2 Get the Mastership of each switch from each controller - No Result (warning)
  • 5.3 Read device roles from ONOS - PASS (tick)
  • 5.4 Check for consistency in roles from each controller - PASS (tick)
  • 5.5 Get the intents from each controller - PASS (tick)
  • 5.6 Check for consistency in Intents from each controller - PASS (tick)
  • 5.7 Get the flows from each controller - PASS (tick)
  • 5.8 Check for consistency in Flows from each controller - PASS (tick)
  • 5.9 Get the OF Table entries - No Result (warning)
  • 5.10 Start continuous pings - No Result (warning)
  • 5.11 Collecting topology information from ONOS - No Result (warning)
  • 5.12 Host view is consistent across ONOS nodes - PASS (tick)
  • 5.13 Each host has an IP address - PASS (tick)
  • 5.14 Cluster view is consistent across ONOS nodes - PASS (tick)
  • 5.15 Cluster view correct across ONOS nodes - PASS (tick)
  • 5.16 Comparing ONOS topology to MN - PASS (tick)
  • 5.17 Device information is correct - PASS (tick)
  • 5.18 Links are correct - PASS (tick)
  • 5.19 Hosts are correct - PASS (tick)

Case 14: Start Leadership Election app - PASS

  • 14.1 Install leadership election app - PASS (tick)
  • 14.2 Run for election on each node - PASS (tick)
  • 14.3 Active node was elected leader? - PASS (tick)

Case 15: Check that Leadership Election is still functional - PASS

  • 15.1 Run for election on each node - PASS (tick)
  • 15.2 Check that each node shows the same leader and candidates - PASS (tick)
  • 15.3 Find current leader and withdraw - PASS (tick)
  • 15.4 Check that a new node was elected leader - PASS (tick)
  • 15.5 Check that that new leader was the candidate of old leader - PASS (tick)
  • 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS (tick)
  • 15.7 Check that oldLeader is a candidate, and leader if only 1 node - No Result (warning)

Case 16: Install Primitives app - PASS

  • 16.1 Install Primitives app - PASS (tick)

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

  • 17.1 Increment then get a default counter on each node - PASS (tick)
  • 17.2 Get then Increment a default counter on each node - PASS (tick)
  • 17.3 Counters we added have the correct values - PASS (tick)
  • 17.4 Add -8 to then get a default counter on each node - PASS (tick)
  • 17.5 Add 5 to then get a default counter on each node - PASS (tick)
  • 17.6 Get then add 5 to a default counter on each node - PASS (tick)
  • 17.7 Counters we added have the correct values - PASS (tick)
  • 17.8 Distributed Set get - PASS (tick)
  • 17.9 Distributed Set size - PASS (tick)
  • 17.10 Distributed Set add() - PASS (tick)
  • 17.11 Distributed Set addAll() - PASS (tick)
  • 17.12 Distributed Set contains() - PASS (tick)
  • 17.13 Distributed Set containsAll() - PASS (tick)
  • 17.14 Distributed Set remove() - PASS (tick)
  • 17.15 Distributed Set removeAll() - PASS (tick)
  • 17.16 Distributed Set addAll() - PASS (tick)
  • 17.17 Distributed Set clear() - PASS (tick)
  • 17.18 Distributed Set addAll() - PASS (tick)
  • 17.19 Distributed Set retain() - PASS (tick)
  • 17.20 Partitioned Transactional maps put - PASS (tick)
  • 17.21 Partitioned Transactional maps get - PASS (tick)
  • 17.22 Get the value of a new value - PASS (tick)
  • 17.23 Atomic Value set() - PASS (tick)
  • 17.24 Get the value after set() - PASS (tick)
  • 17.25 Atomic Value compareAndSet() - PASS (tick)
  • 17.26 Get the value after compareAndSet() - PASS (tick)
  • 17.27 Atomic Value getAndSet() - PASS (tick)
  • 17.28 Get the value after getAndSet() - PASS (tick)
  • 17.29 Atomic Value destory() - PASS (tick)
  • 17.30 Get the value after destroy() - PASS (tick)
  • 17.31 Work Queue add() - PASS (tick)
  • 17.32 Check the work queue stats - PASS (tick)
  • 17.33 Work Queue addMultiple() - PASS (tick)
  • 17.34 Check the work queue stats - PASS (tick)
  • 17.35 Work Queue takeAndComplete() 1 - PASS (tick)
  • 17.36 Check the work queue stats - PASS (tick)
  • 17.37 Work Queue takeAndComplete() 2 - PASS (tick)
  • 17.38 Check the work queue stats - PASS (tick)
  • 17.39 Work Queue destroy() - PASS (tick)
  • 17.40 Check the work queue stats - PASS (tick)

Case 6: Restart ONOS node - PASS

Killing ONOS process and restart cli sessions once onos is up.

  • 6.1 Checking ONOS Logs for errors - No Result (warning)
  • 6.2 Killing ONOS processes - PASS (tick)
  • 6.3 Checking if ONOS is up yet - PASS (tick)
  • 6.4 Starting ONOS CLI sessions - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Checking ONOS nodes - PASS (tick)

Case 3: Adding host Intents - PASS

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

  • 3.1 Install reactive forwarding app - PASS (tick)
  • 3.2 Check app ids - PASS (tick)
  • 3.3 Discovering Hosts( Via pingall for now ) - PASS (tick)
  • 3.4 Uninstall reactive forwarding app - PASS (tick)
  • 3.5 Check app ids - PASS (tick)
  • 3.6 Add host intents via cli - PASS (tick)
  • 3.7 Intent Anti-Entropy dispersion - PASS (tick)

Case 7: Running ONOS Constant State Tests - PASS

  • 7.1 Check that each switch has a master - PASS (tick)
  • 7.2 Read device roles from ONOS - PASS (tick)
  • 7.3 Check for consistency in roles from each controller - PASS (tick)
  • 7.4 Compare switch roles from before failure - PASS (tick)
  • 7.5 Get the intents from each controller - PASS (tick)
  • 7.6 Check for consistency in Intents from each controller - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - PASS (tick)

Case 15: Check that Leadership Election is still functional - PASS

  • 15.1 Run for election on each node - PASS (tick)
  • 15.2 Check that each node shows the same leader and candidates - PASS (tick)
  • 15.3 Find current leader and withdraw - PASS (tick)
  • 15.4 Check that a new node was elected leader - PASS (tick)
  • 15.5 Check that that new leader was the candidate of old leader - PASS (tick)
  • 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS (tick)
  • 15.7 Check that oldLeader is a candidate, and leader if only 1 node - No Result (warning)

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

  • 17.1 Increment then get a default counter on each node - PASS (tick)
  • 17.2 Get then Increment a default counter on each node - PASS (tick)
  • 17.3 Counters we added have the correct values - PASS (tick)
  • 17.4 Add -8 to then get a default counter on each node - PASS (tick)
  • 17.5 Add 5 to then get a default counter on each node - PASS (tick)
  • 17.6 Get then add 5 to a default counter on each node - PASS (tick)
  • 17.7 Counters we added have the correct values - PASS (tick)
  • 17.8 Distributed Set get - PASS (tick)
  • 17.9 Distributed Set size - PASS (tick)
  • 17.10 Distributed Set add() - PASS (tick)
  • 17.11 Distributed Set addAll() - PASS (tick)
  • 17.12 Distributed Set contains() - PASS (tick)
  • 17.13 Distributed Set containsAll() - PASS (tick)
  • 17.14 Distributed Set remove() - PASS (tick)
  • 17.15 Distributed Set removeAll() - PASS (tick)
  • 17.16 Distributed Set addAll() - PASS (tick)
  • 17.17 Distributed Set clear() - PASS (tick)
  • 17.18 Distributed Set addAll() - PASS (tick)
  • 17.19 Distributed Set retain() - PASS (tick)
  • 17.20 Partitioned Transactional maps put - PASS (tick)
  • 17.21 Partitioned Transactional maps get - PASS (tick)
  • 17.22 Get the value of a new value - PASS (tick)
  • 17.23 Atomic Value set() - PASS (tick)
  • 17.24 Get the value after set() - PASS (tick)
  • 17.25 Atomic Value compareAndSet() - PASS (tick)
  • 17.26 Get the value after compareAndSet() - PASS (tick)
  • 17.27 Atomic Value getAndSet() - PASS (tick)
  • 17.28 Get the value after getAndSet() - PASS (tick)
  • 17.29 Atomic Value destory() - PASS (tick)
  • 17.30 Get the value after destroy() - PASS (tick)
  • 17.31 Work Queue add() - PASS (tick)
  • 17.32 Check the work queue stats - PASS (tick)
  • 17.33 Work Queue addMultiple() - PASS (tick)
  • 17.34 Check the work queue stats - PASS (tick)
  • 17.35 Work Queue takeAndComplete() 1 - PASS (tick)
  • 17.36 Check the work queue stats - PASS (tick)
  • 17.37 Work Queue takeAndComplete() 2 - PASS (tick)
  • 17.38 Check the work queue stats - PASS (tick)
  • 17.39 Work Queue destroy() - PASS (tick)
  • 17.40 Check the work queue stats - PASS (tick)

Case 9: Turn off a link to ensure that Link Discovery is working properly - PASS

  • 9.1 Kill Link between s28 and s3 - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Checking ONOS nodes - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - FAIL (error)
    • Intents have not been installed correctly, pings failed.
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - FAIL (error)
    • Intents have not been installed correctly, pings failed.

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

  • 10.1 Bring link between s28 and s3 back up - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Checking ONOS nodes - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - FAIL (error)
    • Intents have not been installed correctly, pings failed.
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - FAIL (error)
    • Intents have not been installed correctly, pings failed.

Case 11: Killing a switch to ensure it is discovered correctly - PASS

  • 11.1 Kill s5 - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Checking ONOS nodes - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - FAIL (error)
    • Intents have not been installed correctly, pings failed.
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - FAIL (error)
    • Intents have not been installed correctly, pings failed.

Case 12: Adding a switch to ensure it is discovered correctly - PASS

  • 12.1 Add back s5 - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Checking ONOS nodes - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - FAIL

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - FAIL (error)
    • Intents have not been installed correctly, pings failed.
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - FAIL (error)
    • Intents have not been installed correctly, pings failed.

Case 13: Test Cleanup - PASS

  • 13.1 Checking raft log size - PASS (tick)
  • 13.2 Killing tcpdumps - No Result (warning)
  • 13.3 Checking ONOS Logs for errors - No Result (warning)
  • 13.4 Stopping Mininet - PASS (tick)