Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
FUNCflow at 14 Nov 2020 13:09:27
commit 7898ceda95b0e27a048c9fcee5e5c8daa332a4d4 (HEAD, origin/onos-1.15, onos-1.15)
Author: Jian Li [pyguni@gmail.com]
AuthorDate: Mon Oct 5 22:36:41 2020 +0900
Commit: Jian Li [pyguni@gmail.com]
CommitDate: Mon Oct 5 22:56:34 2020 +0900
Fix: make all openstack resource name optional
Case 1: Pull onos branch and build onos on Teststation. - PASS
For loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Uninstalling Atomix - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Creating ONOS package - PASS
- 2.5 Installing Atomix - PASS
- 2.6 Installing ONOS package - PASS
- 2.7 Set up ONOS secure SSH - PASS
- 2.8 Checking ONOS service - PASS
- 2.9 Starting ONOS CLI sessions - PASS
- 2.10 Checking ONOS nodes - PASS
- 2.11 Checking ONOS applications - PASS
Case 10: Compare ONOS Topology view to Mininet topology - PASS
Compare topology elements between Mininet and ONOS
- 10.1 Setup Mininet Topology - PASS
- 10.2 Assign switch to controller - PASS
- 10.3 Comparing Mininet topology to ONOS topology - PASS
Case 11: Starting scapy with Mininet - PASS
- 11.1 Creating Host component - No Result
- 11.2 Start scapy components - PASS
Case 1000: Verify flow MAC selectors are correctly compiled - PASS
Install two flows with only MAC selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the MAC src and dst.
- 1000.1 Add flows with MAC addresses as the only selectors - PASS
- 1000.2 Check flow is in the ADDED state - PASS
- 1000.3 Check flows are in Mininet's flow table - PASS
- 1000.4 Send a packet to verify the flows are correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 1100: Verify VLAN selector is correctly compiled - PASS
Install one flow with only the VLAN selector specified, then verify the flow is added in ONOS, and finally broadcast a packet with the correct VLAN tag.
- 1100.1 Add a flow with the VLAN tag as the only selector - PASS
- 1100.2 Check flow is in the ADDED state - PASS
- 1100.3 Check flows are in Mininet's flow table - PASS
- 1100.4 Send a packet to verify the flow are correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 1200: Verify flow IP selectors are correctly compiled - PASS
Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.
- 1200.1 Add flows with ARP addresses as the only selectors - PASS
- 1200.2 Check flow is in the ADDED state - PASS
- 1200.3 Check flows are in Mininet's flow table - PASS
- 1200.4 Send a packet to verify the flow is correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 1300: Verify the MPLS selector is correctly compiled on the flow. - PASS
Install one flow with an MPLS selector, verify the flow is added in ONOS, and finally send a packet via scapy that has a MPLS label.
- 1300.1 Add a flow with a MPLS selector - PASS
- 1300.2 Check flow is in the ADDED state - PASS
- 1300.3 Check flows are in Mininet's flow table - PASS
- 1300.4 Send a packet to verify the flow is correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 1400: Verify flow IP selectors are correctly compiled - PASS
Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.
- 1400.1 Add flows with IPv4 addresses as the only selectors - PASS
- 1400.2 Check flow is in the ADDED state - PASS
- 1400.3 Check flows are in Mininet's flow table - PASS
- 1400.4 Send a packet to verify the flow is correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 1500: Verify IPv6 selector is correctly compiled - PASS
Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.
- 1500.1 Add flows with IPv6 addresses as the only selectors - PASS
- 1500.2 Check flow is in the ADDED state - PASS
- 1500.3 Check flows are in Mininet's flow table - PASS
- 1500.4 Send a packet to verify the flow is correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 1600: Verify the UDP selector is correctly compiled on the flow - PASS
Install a flow with only the UDP selector specified, verify the flow is added in ONOS, and finally send a UDP packet to verify the UDP selector is compiled correctly.
- 1600.1 Add a flow with a UDP selector - PASS
- 1600.2 Check flow is in the ADDED state - PASS
- 1600.3 Check flows are in Mininet's flow table - PASS
- 1600.4 Send a packet to verify the flow is correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 1700: Verify the TCP selector is correctly compiled on the flow - PASS
Install a flow with only the TCP selector specified, verify the flow is added in ONOS, and finally send a TCP packet to verify the TCP selector is compiled correctly.
- 1700.1 Add a flow with a TCP selector - PASS
- 1700.2 Check flow is in the ADDED state - PASS
- 1700.3 Check flows are in Mininet's flow table - PASS
- 1700.4 Send a packet to verify the flow is correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 1800: Verify the UDP selector is correctly compiled on the flow - PASS
Install a flow with only the UDP selector specified, verify the flow is added in ONOS, and finally send a UDP packet to verify the UDP selector is compiled correctly.
- 1800.1 Add a flow with a SCTP selector - PASS
- 1800.2 Check flow is in the ADDED state - PASS
- 1800.3 Check flows are in Mininet's flow table - PASS
- 1800.4 Send a packet to verify the flow is correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 1900: Verify the ICMPv4 selector is correctly compiled on the flow - PASS
Install a flow with only the ICMPv4 selector specified, verify the flow is added in ONOS, and finally send a IMCPv4 packet to verify the ICMPv4 selector is compiled correctly.
- 1900.1 Add a flow with a ICMPv4 selector - PASS
- 1900.2 Check flow is in the ADDED state - PASS
- 1900.3 Check flows are in Mininet's flow table - PASS
- 1900.4 Send a packet to verify the flow is correct - PASS
Case 3000: Delete flows that were added through rest - PASS
- 3000.1 Deleting flows - PASS
Case 2000: Verify the ICMPv6 selector is correctly compiled on the flow - PASS
Install a flow with only the ICMPv6 selector specified, verify the flow is added in ONOS, and finally send a IMCPv6 packet to verify the ICMPv6 selector is compiled correctly.
- 2000.1 Add a flow with a ICMPv6 selector - PASS
- 2000.2 Check flow is in the ADDED state - PASS
- 2000.3 Check flows are in Mininet's flow table - PASS
- 2000.4 Send a packet to verify the flow is correct - PASS
Case 12: Stop Mininet and Scapy - PASS
Stopping the current mininet topology to start up fresh
- 12.1 Stopping and Removing Scapy Host Components - PASS
- 12.2 Stopping Mininet - PASS