Icon

Have questions? Stuck? Please check our FAQ for some common questions and answers.

This wiki documents the current development version of ONOS (master). Refer to the Wiki Archives for documentation for all previous versions of ONOS.

Skip to end of metadata
Go to start of metadata
HAkillNodes at 20 Mar 2017 12:26:16

commit 3002cb124bd932b725afbe199dd0249a36aa15d2 (HEAD, origin/onos-1.9, onos-1.9)
Author: sivachidambaram subramanian [sisubram@partner.ciena.com]
AuthorDate: Wed Mar 8 13:53:30 2017 +0530
Commit: Thomas Vachuska [tom@onlab.us]
CommitDate: Mon Mar 13 18:19:48 2017 +0000

ONOS-6082
--
(cherry picked from commit 12c08c07dbb6ca9f54a8be7f96ac2bd6d80c709d)

Case 1: Setting up test environment - PASS

Setup the test environment including installing ONOS, starting Mininet and ONOScli sessions.

  • 1.1 Create cell file - No Result (warning)
  • 1.2 Applying cell variable to environment - No Result (warning)
  • 1.3 Starting Mininet - PASS (tick)
  • 1.4 Git checkout and pull master - No Result (warning)
  • 1.5 Using mvn clean install - PASS (tick)
  • 1.6 Make sure ONOS service doesn't automatically respawn - No Result (warning)
  • 1.7 Creating ONOS package - PASS (tick)
  • 1.8 Installing ONOS package - PASS (tick)
  • 1.9 Set up ONOS secure SSH - PASS (tick)
  • 1.10 Checking if ONOS is up yet - PASS (tick)
  • 1.11 Starting ONOS CLI sessions - PASS (tick)
  • 1.12 Clean up ONOS service changes - No Result (warning)
  • 1.13 Checking ONOS nodes - PASS (tick)
  • 1.14 Activate apps defined in the params file - No Result (warning)
  • 1.15 Set ONOS configurations - PASS (tick)
  • 1.16 App Ids check - PASS (tick)

Case 2: Assigning devices to controllers - PASS

Assign switches to ONOS using 'ovs-vsctl' and check that an ONOS node becomes the master of the device.

  • 2.1 Assign switches to controllers - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 21: Assigning Controller roles for switches - PASS

Check that ONOS is connected to each device. Then manually assign mastership to specific ONOS nodes using 'device-role'

  • 21.1 Assign mastership of switches to specific controllers - PASS (tick)
  • 21.2 Check mastership was correctly assigned - PASS (tick)

Case 3: Adding host Intents - PASS

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

  • 3.1 Install reactive forwarding app - PASS (tick)
  • 3.2 Check app ids - PASS (tick)
  • 3.3 Discovering Hosts( Via pingall for now ) - PASS (tick)
  • 3.4 Uninstall reactive forwarding app - PASS (tick)
  • 3.5 Check app ids - PASS (tick)
  • 3.6 Add host intents via cli - PASS (tick)
  • 3.7 Intent Anti-Entropy dispersion - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - PASS (tick)

Case 5: Setting up and gathering data for current state - PASS

  • 5.1 Check that each switch has a master - PASS (tick)
  • 5.2 Get the Mastership of each switch from each controller - PASS (tick)
  • 5.3 Check for consistency in roles from each controller - PASS (tick)
  • 5.4 Get the intents from each controller - PASS (tick)
  • 5.5 Check for consistency in Intents from each controller - PASS (tick)
  • 5.6 Get the flows from each controller - PASS (tick)
  • 5.7 Check for consistency in Flows from each controller - PASS (tick)
  • 5.8 Get the OF Table entries - No Result (warning)
  • 5.9 Start continuous pings - No Result (warning)
  • 5.10 Collecting topology information from ONOS - No Result (warning)
  • 5.11 Host view is consistent across ONOS nodes - PASS (tick)
  • 5.12 Each host has an IP address - PASS (tick)
  • 5.13 Cluster view is consistent across ONOS nodes - PASS (tick)
  • 5.14 Cluster view correct across ONOS nodes - PASS (tick)
  • 5.15 Comparing ONOS topology to MN - PASS (tick)
  • 5.16 Device information is correct - PASS (tick)
  • 5.17 Links are correct - PASS (tick)
  • 5.18 Hosts are correct - PASS (tick)

Case 14: Start Leadership Election app - PASS

  • 14.1 Install leadership election app - PASS (tick)
  • 14.2 Run for election on each node - PASS (tick)
  • 14.3 First node was elected leader - PASS (tick)

Case 16: Install Primitives app - PASS

  • 16.1 Install Primitives app - PASS (tick)

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

  • 17.1 Increment then get a default counter on each node - PASS (tick)
  • 17.2 Get then Increment a default counter on each node - PASS (tick)
  • 17.3 Counters we added have the correct values - PASS (tick)
  • 17.4 Add -8 to then get a default counter on each node - PASS (tick)
  • 17.5 Add 5 to then get a default counter on each node - PASS (tick)
  • 17.6 Get then add 5 to a default counter on each node - PASS (tick)
  • 17.7 Counters we added have the correct values - PASS (tick)
  • 17.8 Distributed Set get - PASS (tick)
  • 17.9 Distributed Set size - PASS (tick)
  • 17.10 Distributed Set add() - PASS (tick)
  • 17.11 Distributed Set addAll() - PASS (tick)
  • 17.12 Distributed Set contains() - PASS (tick)
  • 17.13 Distributed Set containsAll() - PASS (tick)
  • 17.14 Distributed Set remove() - PASS (tick)
  • 17.15 Distributed Set removeAll() - PASS (tick)
  • 17.16 Distributed Set addAll() - PASS (tick)
  • 17.17 Distributed Set clear() - PASS (tick)
  • 17.18 Distributed Set addAll() - PASS (tick)
  • 17.19 Distributed Set retain() - PASS (tick)
  • 17.20 Partitioned Transactional maps put - PASS (tick)
  • 17.21 Partitioned Transactional maps get - PASS (tick)

Case 61: Kill minority of ONOS nodes - PASS

  • 61.1 Checking ONOS Logs for errors - No Result (warning)
  • 61.2 Kill 2 ONOS nodes - PASS (tick)
  • 61.3 Checking ONOS nodes - PASS (tick)
  • No labels