Page tree

Have questions? Stuck? Please check our FAQ for some common questions and answers.

This wiki documents the current development version of ONOS (master). Refer to the Wiki Archives for documentation for all previous versions of ONOS.

Skip to end of metadata
Go to start of metadata

HAsanity at 31 Jul 2017 11:29:59


commit 52f5828004e9c59774a94542e74af7dcc18d9771 (HEAD, origin/onos-1.9, onos-1.9)
Author: Ray Milkey [ray@onlab.us]
AuthorDate: Fri Jun 23 12:46:32 2017 -0700
Commit: Ray Milkey [ray@onlab.us]
CommitDate: Fri Jun 23 12:46:32 2017 -0700

Starting snapshot 1.9.3-SNAPSHOT

Case 1: Setting up test environment - PASS

Setup the test environment including installing ONOS, starting Mininet and ONOScli sessions.

  • 1.1 Create cell file - No Result (warning)
  • 1.2 Applying cell variable to environment - No Result (warning)
  • 1.3 Starting Mininet - PASS (tick)
  • 1.4 Git checkout and pull master - No Result (warning)
  • 1.5 Using mvn clean install - PASS (tick)
  • 1.6 Creating ONOS package - PASS (tick)
  • 1.7 Installing ONOS package - PASS (tick)
  • 1.8 Set up ONOS secure SSH - PASS (tick)
  • 1.9 Checking if ONOS is up yet - PASS (tick)
  • 1.10 Starting ONOS CLI sessions - PASS (tick)
  • 1.11 Checking ONOS nodes - PASS (tick)
  • 1.12 Activate apps defined in the params file - No Result (warning)
  • 1.13 Set ONOS configurations - PASS (tick)
  • 1.14 App Ids check - PASS (tick)

Case 2: Assigning devices to controllers - PASS

Assign switches to ONOS using 'ovs-vsctl' and check that an ONOS node becomes the master of the device.

  • 2.1 Assign switches to controllers - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 21: Assigning Controller roles for switches - PASS

Check that ONOS is connected to each device. Then manually assign mastership to specific ONOS nodes using 'device-role'

  • 21.1 Assign mastership of switches to specific controllers - PASS (tick)
  • 21.2 Check mastership was correctly assigned - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 3: Adding host Intents - PASS

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

  • 3.1 Install reactive forwarding app - PASS (tick)
  • 3.2 Check app ids - PASS (tick)
  • 3.3 Discovering Hosts( Via pingall for now ) - PASS (tick)
  • 3.4 Uninstall reactive forwarding app - PASS (tick)
  • 3.5 Check app ids - PASS (tick)
  • 3.6 Add host intents via cli - PASS (tick)
  • 3.7 Intent Anti-Entropy dispersion - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - PASS (tick)

Case 5: Setting up and gathering data for current state - PASS


  • 5.1 Check that each switch has a master - PASS (tick)
  • 5.2 Get the Mastership of each switch from each controller - PASS (tick)
  • 5.3 Check for consistency in roles from each controller - PASS (tick)
  • 5.4 Get the intents from each controller - PASS (tick)
  • 5.5 Check for consistency in Intents from each controller - PASS (tick)
  • 5.6 Get the flows from each controller - PASS (tick)
  • 5.7 Check for consistency in Flows from each controller - PASS (tick)
  • 5.8 Get the OF Table entries - No Result (warning)
  • 5.9 Start continuous pings - No Result (warning)
  • 5.10 Collecting topology information from ONOS - No Result (warning)
  • 5.11 Host view is consistent across ONOS nodes - PASS (tick)
  • 5.12 Each host has an IP address - PASS (tick)
  • 5.13 Cluster view is consistent across ONOS nodes - PASS (tick)
  • 5.14 Cluster view correct across ONOS nodes - PASS (tick)
  • 5.15 Comparing ONOS topology to MN - PASS (tick)
  • 5.16 Device information is correct - PASS (tick)
  • 5.17 Links are correct - PASS (tick)
  • 5.18 Hosts are correct - PASS (tick)

Case 14: Start Leadership Election app - PASS


  • 14.1 Install leadership election app - PASS (tick)
  • 14.2 Run for election on each node - PASS (tick)
  • 14.3 First node was elected leader - PASS (tick)

Case 16: Install Primitives app - PASS


  • 16.1 Install Primitives app - PASS (tick)

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

  • 17.1 Increment then get a default counter on each node - PASS (tick)
  • 17.2 Get then Increment a default counter on each node - PASS (tick)
  • 17.3 Counters we added have the correct values - PASS (tick)
  • 17.4 Add -8 to then get a default counter on each node - PASS (tick)
  • 17.5 Add 5 to then get a default counter on each node - PASS (tick)
  • 17.6 Get then add 5 to a default counter on each node - PASS (tick)
  • 17.7 Counters we added have the correct values - PASS (tick)
  • 17.8 Distributed Set get - PASS (tick)
  • 17.9 Distributed Set size - PASS (tick)
  • 17.10 Distributed Set add() - PASS (tick)
  • 17.11 Distributed Set addAll() - PASS (tick)
  • 17.12 Distributed Set contains() - PASS (tick)
  • 17.13 Distributed Set containsAll() - PASS (tick)
  • 17.14 Distributed Set remove() - PASS (tick)
  • 17.15 Distributed Set removeAll() - PASS (tick)
  • 17.16 Distributed Set addAll() - PASS (tick)
  • 17.17 Distributed Set clear() - PASS (tick)
  • 17.18 Distributed Set addAll() - PASS (tick)
  • 17.19 Distributed Set retain() - PASS (tick)
  • 17.20 Partitioned Transactional maps put - PASS (tick)
  • 17.21 Partitioned Transactional maps get - PASS (tick)

Case 6: Wait 60 seconds instead of inducing a failure - PASS


Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 7: Running ONOS Constant State Tests - PASS


  • 7.1 Check that each switch has a master - PASS (tick)
  • 7.2 Read device roles from ONOS - PASS (tick)
  • 7.3 Check for consistency in roles from each controller - PASS (tick)
  • 7.4 Compare switch roles from before failure - PASS (tick)
  • 7.5 Get the intents and compare across all nodes - PASS (tick)
  • 7.6 Check for consistency in Intents from each controller - PASS (tick)
  • 7.7 Compare current intents with intents before the failure - PASS (tick)
  • 7.8 Get the OF Table entries and compare to before component failure - PASS (tick)
  • 7.9 Leadership Election is still functional - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - PASS (tick)

Case 15: Check that Leadership Election is still functional - PASS


  • 15.1 Run for election on each node - PASS (tick)
  • 15.2 Check that each node shows the same leader and candidates - PASS (tick)
  • 15.3 Find current leader and withdraw - PASS (tick)
  • 15.4 Check that a new node was elected leader - PASS (tick)
  • 15.5 Check that that new leader was the candidate of old leader - PASS (tick)
  • 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS (tick)
  • 15.7 Check that oldLeader is a candidate, and leader if only 1 node - PASS (tick)

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

  • 17.1 Increment then get a default counter on each node - PASS (tick)
  • 17.2 Get then Increment a default counter on each node - PASS (tick)
  • 17.3 Counters we added have the correct values - PASS (tick)
  • 17.4 Add -8 to then get a default counter on each node - PASS (tick)
  • 17.5 Add 5 to then get a default counter on each node - PASS (tick)
  • 17.6 Get then add 5 to a default counter on each node - PASS (tick)
  • 17.7 Counters we added have the correct values - PASS (tick)
  • 17.8 Distributed Set get - PASS (tick)
  • 17.9 Distributed Set size - PASS (tick)
  • 17.10 Distributed Set add() - PASS (tick)
  • 17.11 Distributed Set addAll() - PASS (tick)
  • 17.12 Distributed Set contains() - PASS (tick)
  • 17.13 Distributed Set containsAll() - PASS (tick)
  • 17.14 Distributed Set remove() - PASS (tick)
  • 17.15 Distributed Set removeAll() - PASS (tick)
  • 17.16 Distributed Set addAll() - PASS (tick)
  • 17.17 Distributed Set clear() - PASS (tick)
  • 17.18 Distributed Set addAll() - PASS (tick)
  • 17.19 Distributed Set retain() - PASS (tick)
  • 17.20 Partitioned Transactional maps put - PASS (tick)
  • 17.21 Partitioned Transactional maps get - PASS (tick)

Case 9: Turn off a link to ensure that Link Discovery is working properly - PASS


  • 9.1 Kill Link between s3 and s28 - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - PASS (tick)

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS


  • 10.1 Bring link between s3 and s28 back up - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - PASS (tick)

Case 11: Killing a switch to ensure it is discovered correctly - PASS


  • 11.1 Kill s5 - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - PASS (tick)

Case 12: Adding a switch to ensure it is discovered correctly - PASS


  • 12.1 Add back s5 - PASS (tick)

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

  • 4.1 Check Intent state - PASS (tick)
  • 4.2 Ping across added host intents - PASS (tick)
  • 4.3 Check leadership of topics - PASS (tick)
  • 4.4 Wait a minute then ping again - PASS (tick)

Case 13: Test Cleanup - PASS


  • 13.1 Killing tcpdumps - No Result (warning)
  • 13.2 Stopping Mininet - PASS (tick)
  • 13.3 Checking ONOS Logs for errors - No Result (warning)
  • No labels