Page tree

Have questions? Stuck? Please check our FAQ for some common questions and answers.

This wiki documents the current development version of ONOS (master). Refer to the Wiki Archives for documentation for all previous versions of ONOS.

Skip to end of metadata
Go to start of metadata
FUNCflow at 17 Jan 2019 11:32:54

FUNCflow

commit 8ae74a34f50812d031a8dafdf1d396fa72fc0350 (HEAD -] onos-2.0, origin/onos-2.0)
Author: Jordan Halterman [jordan@opennetworking.org]
AuthorDate: Wed Jan 16 13:42:28 2019 -0800
Commit: Ray Milkey [ray@opennetworking.org]
CommitDate: Wed Jan 16 22:17:50 2019 +0000

Upgrade to Atomix 3.1.5

Case 1: Pull onos branch and build onos on Teststation. - PASS

For loading from params file, and pull and build the latest ONOS package

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Uninstalling Atomix - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Creating ONOS package - PASS (tick)
  • 2.5 Installing Atomix - PASS (tick)
  • 2.6 Installing ONOS package - PASS (tick)
  • 2.7 Set up ONOS secure SSH - PASS (tick)
  • 2.8 Checking ONOS service - PASS (tick)
  • 2.9 Starting ONOS CLI sessions - PASS (tick)
  • 2.10 Checking ONOS nodes - PASS (tick)
  • 2.11 Checking ONOS applications - PASS (tick)

Case 10: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

  • 10.1 Setup Mininet Topology - PASS (tick)
  • 10.2 Assign switch to controller - PASS (tick)
  • 10.3 Comparing Mininet topology to ONOS topology - PASS (tick)

Case 11: Starting scapy with Mininet - PASS

  • 11.1 Creating Host component - No Result (warning)
  • 11.2 Start scapy components - PASS (tick)

Case 1000: Verify flow MAC selectors are correctly compiled - PASS

Install two flows with only MAC selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the MAC src and dst.

  • 1000.1 Add flows with MAC addresses as the only selectors - PASS (tick)
  • 1000.2 Check flow is in the ADDED state - PASS (tick)
  • 1000.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1000.4 Send a packet to verify the flows are correct - PASS (tick)

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 1100: Verify VLAN selector is correctly compiled - FAIL

Install one flow with only the VLAN selector specified, then verify the flow is added in ONOS, and finally broadcast a packet with the correct VLAN tag.

  • 1100.1 Add a flow with the VLAN tag as the only selector - PASS (tick)
  • 1100.2 Check flow is in the ADDED state - PASS (tick)
  • 1100.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1100.4 Send a packet to verify the flow are correct - FAIL (error)
    • Failed to send a packet

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 1200: Verify flow IP selectors are correctly compiled - PASS

Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.

  • 1200.1 Add flows with ARP addresses as the only selectors - PASS (tick)
  • 1200.2 Check flow is in the ADDED state - PASS (tick)
  • 1200.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1200.4 Send a packet to verify the flow is correct - PASS (tick)

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 1300: Verify the MPLS selector is correctly compiled on the flow. - PASS

Install one flow with an MPLS selector, verify the flow is added in ONOS, and finally send a packet via scapy that has a MPLS label.

  • 1300.1 Add a flow with a MPLS selector - PASS (tick)
  • 1300.2 Check flow is in the ADDED state - PASS (tick)
  • 1300.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1300.4 Send a packet to verify the flow is correct - PASS (tick)

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 1400: Verify flow IP selectors are correctly compiled - PASS

Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.

  • 1400.1 Add flows with IPv4 addresses as the only selectors - PASS (tick)
  • 1400.2 Check flow is in the ADDED state - PASS (tick)
  • 1400.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1400.4 Send a packet to verify the flow is correct - PASS (tick)

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 1500: Verify IPv6 selector is correctly compiled - PASS

Install two flows with only IP selectors specified, then verify flows are added in ONOS, finally send a packet that only specifies the IP src and dst.

  • 1500.1 Add flows with IPv6 addresses as the only selectors - PASS (tick)
  • 1500.2 Check flow is in the ADDED state - PASS (tick)
  • 1500.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1500.4 Send a packet to verify the flow is correct - PASS (tick)

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 1600: Verify the UDP selector is correctly compiled on the flow - PASS

Install a flow with only the UDP selector specified, verify the flow is added in ONOS, and finally send a UDP packet to verify the UDP selector is compiled correctly.

  • 1600.1 Add a flow with a UDP selector - PASS (tick)
  • 1600.2 Check flow is in the ADDED state - PASS (tick)
  • 1600.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1600.4 Send a packet to verify the flow is correct - PASS (tick)

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 1700: Verify the TCP selector is correctly compiled on the flow - PASS

Install a flow with only the TCP selector specified, verify the flow is added in ONOS, and finally send a TCP packet to verify the TCP selector is compiled correctly.

  • 1700.1 Add a flow with a TCP selector - PASS (tick)
  • 1700.2 Check flow is in the ADDED state - PASS (tick)
  • 1700.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1700.4 Send a packet to verify the flow is correct - PASS (tick)

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 1800: Verify the UDP selector is correctly compiled on the flow - FAIL

Install a flow with only the UDP selector specified, verify the flow is added in ONOS, and finally send a UDP packet to verify the UDP selector is compiled correctly.

  • 1800.1 Add a flow with a SCTP selector - PASS (tick)
  • 1800.2 Check flow is in the ADDED state - PASS (tick)
  • 1800.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1800.4 Send a packet to verify the flow is correct - FAIL (error)
    • Failed to send a packet

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 1900: Verify the ICMPv4 selector is correctly compiled on the flow - PASS

Install a flow with only the ICMPv4 selector specified, verify the flow is added in ONOS, and finally send a IMCPv4 packet to verify the ICMPv4 selector is compiled correctly.

  • 1900.1 Add a flow with a ICMPv4 selector - PASS (tick)
  • 1900.2 Check flow is in the ADDED state - PASS (tick)
  • 1900.3 Check flows are in Mininet's flow table - PASS (tick)
  • 1900.4 Send a packet to verify the flow is correct - PASS (tick)

Case 3000: Delete flows that were added through rest - PASS

  • 3000.1 Deleting flows - PASS (tick)

Case 2000: Verify the ICMPv6 selector is correctly compiled on the flow - PASS

Install a flow with only the ICMPv6 selector specified, verify the flow is added in ONOS, and finally send a IMCPv6 packet to verify the ICMPv6 selector is compiled correctly.

  • 2000.1 Add a flow with a ICMPv6 selector - PASS (tick)
  • 2000.2 Check flow is in the ADDED state - PASS (tick)
  • 2000.3 Check flows are in Mininet's flow table - PASS (tick)
  • 2000.4 Send a packet to verify the flow is correct - PASS (tick)

Case 12: Stop Mininet and Scapy - PASS

Stopping the current mininet topology to start up fresh

  • 12.1 Stopping and Removing Scapy Host Components - PASS (tick)
  • 12.2 Stopping Mininet - PASS (tick)

Case 100: - PASS

  • No labels