Page tree

This is an archive of the ONOS 1.4 wiki. For the current ONOS wiki, look here.

Skip to end of metadata
Go to start of metadata
SCPFscaleTopo at 01 Mar 2016 14:10:58

Case 1: Constructing test variables - PASS

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Starting up Mininet and verifying topology - PASS

Starting Mininet with a scalling topology and comparing topology elements between Mininet and ONOS

  • 10.1 Starting up TORUS 5x5 topology - PASS (tick)

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 5x5 - PASS

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - PASS (tick)

Case 100: Balancing Masters and bring ONOS node 3 down: TORUS 5x5 - No Result

Balance masters to make sure each controller has some devices and stop ONOS node 3 service.

  • 100.1 Bringing down node 3 - No Result (warning)

Case 300: - PASS

  • 300.1 Balancing Masters - PASS (tick)

Case 11: Verifying topology: TORUS 5x5 - PASS

Pinging all hosts and comparing topology elements between Mininet and ONOS

  • 11.1 Comparing MN topology to ONOS topology - PASS (tick)
  • No labels