Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 104: Check connectivity -

...

FAIL

  • 104.1 Ping between all hosts - PASS (tick)FAIL (error)
    • Failed to ping between all hosts

Case 5: Setting up and gathering data for current state - PASS

...

  • 7.1 Check that each switch has a master - PASS (tick)
  • 7.2 Read device roles from ONOS - PASS (tick)
  • 7.3 Check for consistency in roles from each controller - PASS (tick)
  • 7.4 Get the intents from each controller - PASS (tick)
  • 7.5 Check for consistency in Intents from each controller - PASS (tick)
  • 7.6 Compare current intents with intents before the failure - PASS (tick)
  • 7.7 Get the OF Table entries and compare to before component failure - PASS (tick)
  • 7.8 Leadership Election is still functional - PASS (tick)

Case 104: Check connectivity -

...

FAIL

  • 104.1 Ping between all hosts - PASS (tick)FAIL (error)
    • Failed to ping between all hosts

Case 15: Check that Leadership Election is still functional -

...

PASS

  • 15.1 Run for election on each node - FAIL (error)
    • At least one node failed to run for leadership
    • Skipping the rest of this case.
  • PASS (tick)
  • 15.2 Check that each node shows the same leader and candidates - PASS (tick)
  • 15.3 Find current leader and withdraw - PASS (tick)
  • 15.4 Check that a new node was elected leader - PASS (tick)
  • 15.5 Check that that new leader was the candidate of old leader - PASS (tick)
  • 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS (tick)
  • 15.7 Check that oldLeader is a candidate, and leader if only 1 node - No Result (warning)

Case 17: Check for basic functionality with distributed primitives -

...

PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

  • 17.1 Increment then get a default counter on each node - PASS (tick)
  • 17.2 Get then Increment a default counter on each node - PASS (tick)
  • 17.3 Counters we added have the correct values - PASS (tick)
  • 17.4 Add -8 to then get a default counter on each node - PASS (tick)
  • 17.5 Add 5 to then get a default counter on each node - PASS (tick)
  • 17.6 Get then add 5 to a default counter on each node - PASS (tick)
  • 17.7 Counters we added have the correct values - PASS (tick)
  • 17.8 Distributed Set get - PASS (tick)
  • 17.9 Distributed Set size - PASS (tick)
  • 17.10 Distributed Set add() - PASS (tick)
  • 17.11 Distributed Set addAll() - PASS (tick)
  • 17.12 Distributed Set contains() - PASS (tick)
  • 17.13 Distributed Set containsAll() - PASS (tick)
  • 17.14 Distributed Set remove() - PASS (tick)
  • 17.15 Distributed Set removeAll() - PASS (tick)
  • 17.16 Distributed Set addAll() - PASS (tick)
  • 17.17 Distributed Set clear() - PASS (tick)
  • 17.18 Distributed Set addAll() - PASS (tick)
  • 17.19 Distributed Set retain() - PASS (tick)
  • 17.20 Partitioned Transactional maps put - PASS (tick)
  • 17.21 Partitioned Transactional maps get - FAIL (error)
  • Partitioned Transactional Map values incorrect
  • Partitioned Transactional maps get - PASS (tick)
  • 17.22 Get the value of a new value - PASS (tick)
  • 17.23 Atomic Value set() - PASS (tick)
  • 17.24 Get the value after set() - PASS (tick)
  • 17.25 Atomic Value compareAndSet() - PASS (tick)
  • 17.26 Get the value after compareAndSet() - PASS (tick)
  • 17.27 Atomic Value getAndSet() - PASS (tick)
  • 17.28 Get the value after getAndSet() - PASS (tick)
  • 17.29 Atomic Value destory() - PASS (tick)
  • 17.30 Get the value after destroy() - PASS (tick)
  • 17.31 Work Queue add() - PASS (tick)
  • 17.32 Check the work queue stats - PASS (tick)
  • 17.33 Work Queue addMultiple() - PASS (tick)
  • 17.34 Check the work queue stats - PASS (tick)
  • 17.35 Work Queue takeAndComplete() 1 - PASS (tick)
  • 17.36 Check the work queue stats - PASS (tick)
  • 17.37 Work Queue takeAndComplete() 2 - PASS (tick)
  • 17.38 Check the work queue stats - PASS (tick)
  • 17.39 Work Queue destroy() - PASS (tick)
  • 17.40 Check the work queue stats - PASS (tick)

...

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 7: Running ONOS Constant State Tests -

...

FAIL

  • 7.1 Check that each switch has a master - PASS (tick)
  • 7.2 Read device roles from ONOS - PASS (tick)
  • 7.3 Check for consistency in roles from each controller - PASS (tick)FAIL (error)
    • ONOS nodes have different views of switch roles
  • 7.4 Get the intents from each controller - PASS (tick)
  • 7.5 Check for consistency in Intents from each controller - PASS (tick)
  • 7.6 Compare current intents with intents before the failure - PASS (tick)
  • 7.7 Get the OF Table entries and compare to before component failure - PASS (tick)
  • 7.8 Leadership Election is still functional - PASS (tick)

Case 104: Check connectivity -

...

FAIL

  • 104.1 Ping between all hosts - PASS (tick)FAIL (error)
    • Failed to ping between all hosts

Case 15: Check that Leadership Election is still functional - PASS

  • 15.1 Run for election on each node - PASS (tick)
  • 15.2 Check that each node shows the same leader and candidates - PASS (tick)
  • 15.3 Find current leader and withdraw - PASS (tick)
  • 15.4 Check that a new node was elected leader - PASS (tick)
  • 15.5 Check that that new leader was the candidate of old leader - PASS (tick)
  • 15.6 Run for election on old leader( just so everyone is in the hat ) - PASS (tick)
  • 15.7 Check that oldLeader is a candidate, and leader if only 1 node - No Result (warning)

Case 17: Check for basic functionality with distributed primitives - PASS

Test the methods of the distributed primitives (counters and sets) throught the cli

...

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 104: Check connectivity -

...

FAIL

  • 104.1 Ping between all hosts - PASS (tick)FAIL (error)
    • Failed to ping between all hosts

Case 10: Restore a link to ensure that Link Discovery is working properly - PASS

...

  • 8.1 Comparing ONOS topology to MN topology - PASS (tick)
  • 8.2 Hosts view is consistent across all ONOS nodes - PASS (tick)
  • 8.3 Hosts information is correct - PASS (tick)
  • 8.4 Host attachment points to the network - PASS (tick)
  • 8.5 Clusters view is consistent across all ONOS nodes - PASS (tick)
  • 8.6 There is only one SCC - PASS (tick)
  • 8.7 Device information is correct - PASS (tick)
  • 8.8 Links are correct - PASS (tick)
  • 8.9 Hosts are correct - PASS (tick)
  • 8.10 Checking ONOS nodes - PASS (tick)

Case 104: Check connectivity -

...

FAIL

  • 104.1 Ping between all hosts - PASS (tick)FAIL (error)
    • Failed to ping between all hosts

Case 13: Test Cleanup - PASS

...