Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 232 Next »

FUNCoptical at 15 Jun 2016 03:42:44

commit 590160aa0f27bc32c246ab72a78019e7be409dec (HEAD, origin/master, origin/HEAD, master)
Author: Madan Jampani [madan@onlab.us]
AuthorDate: Tue Jun 14 16:49:44 2016 -0700
Commit: Brian O'Connor [bocon@onlab.us]
CommitDate: Wed Jun 15 05:37:13 2016 +0000

Ensure cluster metadata is setup as part of onos-run-karaf

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

  • 10.1 Starting mininet and LINC-OE - PASS (tick)

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

  • 21.1 Discover Hosts through Pingall - PASS (tick)

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

  • 22.1 Send arping between all hosts - PASS (tick)

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

  • 23.1 Comparing Mininet topology to ONOS topology - PASS (tick)

Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

  • 31.1 Adding point intents - FAIL (error)
    • Failed to add point intents
    • Skipping the rest of this case.

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

  • 32.1 Adding host intents to h1 and h2 - FAIL (error)
    • Some of the intents are not in INSTALLED state
  • 32.2 Removing host intents - FAIL (error)
    • Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

  • 19.1 Copying karaf logs - PASS (tick)

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

  • 10.1 Starting mininet and LINC-OE - PASS (tick)

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

  • 21.1 Discover Hosts through Pingall - PASS (tick)

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

  • 22.1 Send arping between all hosts - PASS (tick)

Case 23: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology elements between Mininet and ONOS

  • 23.1 Comparing Mininet topology to ONOS topology - FAIL (error)
    • ONOS incorrectly discovered the topology

Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

  • 31.1 Adding point intents - FAIL (error)
    • Failed to add point intents
    • Skipping the rest of this case.

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

  • 32.1 Adding host intents to h1 and h2 - FAIL (error)
    • Some of the intents are not in INSTALLED state
  • 32.2 Removing host intents - PASS (tick)

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

  • 19.1 Copying karaf logs - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

  • 10.1 Starting mininet and LINC-OE - PASS (tick)

Case 17: Enable intent compilation using Flow Objectives - PASS

  • 17.1 Enabling Flow Objectives - PASS (tick)

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

  • 21.1 Discover Hosts through Pingall - PASS (tick)

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

  • 22.1 Send arping between all hosts - PASS (tick)

Case 23: Compare ONOS Topology view to Mininet topology - PASS

Compare topology elements between Mininet and ONOS

  • 23.1 Comparing Mininet topology to ONOS topology - PASS (tick)

Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

  • 31.1 Adding point intents - FAIL (error)
    • Failed to add point intents
    • Skipping the rest of this case.

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

  • 32.1 Adding host intents to h1 and h2 - FAIL (error)
    • Some of the intents are not in INSTALLED state
  • 32.2 Removing host intents - FAIL (error)
    • Failed to remove host intents

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

  • 19.1 Copying karaf logs - PASS (tick)

Case 2: Starting up 3 node(s) ONOS cluster - PASS

Set up ONOS with 3 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)

Case 10: Mininet with Linc-OE startup - PASS

Start opticalTest.py topology included with ONOS

  • 10.1 Starting mininet and LINC-OE - PASS (tick)

Case 17: Enable intent compilation using Flow Objectives - FAIL

  • 17.1 Enabling Flow Objectives - FAIL (error)
    • Failed to activate Flow Objectives

Case 21: Running Pingall - PASS

Use pingall to discover all hosts. Pingall is expected to fail.

  • 21.1 Discover Hosts through Pingall - PASS (tick)

Case 22: Discover Hosts with arping - PASS

Send arpings between all the hosts to discover and verify them

  • 22.1 Send arping between all hosts - PASS (tick)

Case 23: Compare ONOS Topology view to Mininet topology - FAIL

Compare topology elements between Mininet and ONOS

  • 23.1 Comparing Mininet topology to ONOS topology - FAIL (error)
    • ONOS incorrectly discovered the topology

Case 31: Install point intents between 2 packet layer device and ping the hosts - FAIL

This testcase adds bidirectional point intents between 2 packet layer( mininet ) devices and ping mininet hosts

  • 31.1 Adding point intents - FAIL (error)
    • Failed to add point intents
    • Skipping the rest of this case.

Case 32: Test add host intents between optical layer host - FAIL

Test host intents between 2 optical layer host

  • 32.1 Adding host intents to h1 and h2 - FAIL (error)
    • Some of the intents are not in INSTALLED state
  • 32.2 Removing host intents - PASS (tick)

Case 14: Stop Mininet topology - PASS

Stopping the current mininet topology to start up fresh

  • 14.1 Stopping Mininet Topology - PASS (tick)

Case 19: Copy karaf logs - PASS

Copying the karaf logs to preserve them throughreinstalling ONOS

  • 19.1 Copying karaf logs - PASS (tick)
  • No labels