Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
FUNCnetCfg at 01 Jul 2016 04:28:04
commit 4a9f3afe4dfaa2c85ab1d31c116b7e6ff13be0e5 (HEAD, origin/master, origin/HEAD, master)
Author: Gaurav Agrawal [gaurav.agrawal@huawei.com]
AuthorDate: Thu Jun 30 16:43:08 2016 +0530
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Fri Jul 1 01:37:36 2016 +0000
[ONOS-4784] Auto import of generated sources in target to IDEA intellij
Case 1: Constructing test variables and building ONOS package - PASS
This test case is mainly for loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 25: Preparing network-cfg.json to load configurations - PASS
- 25.1 Moving network-cfg.json to /home/sdn/onos/tools/package/config/ - PASS
Case 2: Starting up 7 node(s) ONOS cluster - PASS
Set up ONOS with 7 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
Case 20: Add Network configurations to the cluster - PASS
Add Network Configurations for devices not discovered yet. One device is allowed, the other disallowed.
- 20.1 Add Net Cfg for switch1 - PASS
- 20.2 Add Net Cfg for switch3 - PASS
- 20.3 Check net config - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 26: Check to see if the pre-startup configurations were set, then remove their allowed status - PASS
- 26.1 Checking configurations for Switches 5 and 6 - No Result
- 26.2 ONOS should only show devices S1, S2, S4, S5, and S6 - PASS
- 26.3 Removing allowed status from Switches 5 and 6 - No Result
Case 21: Check Devices After they initially connect to ONOS - PASS
- 21.1 Check net config - PASS
- 21.2 ONOS should only show devices S1, S2, and S4 - PASS
- 21.3 Check device annotations - PASS
Case 22: Add Network configurations for connected devices to the cluster - PASS
Add Network Configurations for discovered devices. One device is allowed, the other disallowed.
- 22.1 Add Net Cfg for switch2 - PASS
- 22.2 Add Net Cfg for switch4 - PASS
- 22.3 Check net config - PASS
Case 23: Check Devices after all configurations are set - PASS
- 23.1 Check net config - PASS
- 23.2 ONOS should only show devices S1 and S2 - PASS
- 23.3 Check device annotations - PASS
Case 24: Testing removal of configurations - PASS
- 24.1 Remove 'allowed' configuration from all devices - PASS
- 24.2 Check net config - PASS
- 24.3 Delete basic config for s1 and s2 - PASS
- 24.4 Check net config - PASS
- 24.5 Delete the net config for S3 - PASS
- 24.6 Check net config - PASS
- 24.7 Delete the net config for all devices - PASS
- 24.8 Check net config - PASS
- 24.9 Assert the net config for devices is empty - PASS