Due to a ransomware attack, the wiki was reverted to a July 2022 version. . We apologize for the lack of a more recent valid backup.
SRSwitchFailure at 08 Jul 2016 03:25:50
Case 1: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
- 1.1 Constructing test variables - PASS
- 1.2 Create and Apply cell file - PASS
- 1.3 Create and Install ONOS package - PASS
- 1.4 Starting ONOS service - PASS
- 1.5 Checking if ONOS CLI is ready - PASS
- 1.6 Starting Mininet Topology - PASS
- 1.7 Check whether the flow count is bigger than 116 - PASS
- 1.8 Check whether all flow status are ADDED - PASS
- 1.9 Check IP connectivity - PASS
- 1.10 Check VLAN connectivity - PASS
- 1.11 Kill spine101 - PASS
- 1.12 Check IP connectivity CASE1_Failure - PASS
- 1.13 Check VLAN connectivity CASE1_Failure - PASS
- 1.14 Recovering spine101 - PASS
- 1.15 Check whether the flow count is bigger than 116 - PASS
- 1.16 Check whether all flow status are ADDED - PASS
- 1.17 Check IP connectivity CASE1_Recovery - PASS
- 1.18 Check VLAN connectivity CASE1_Recovery - PASS
Case 2: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - FAIL
- 2.1 Create and Apply cell file - PASS
- 2.2 Create and Install ONOS package - PASS
- 2.3 Starting ONOS service - PASS
- 2.4 Checking if ONOS CLI is ready - PASS
- 2.5 Starting Mininet Topology - PASS
- 2.6 Check whether the flow count is bigger than 350 - PASS
- 2.7 Check whether all flow status are ADDED - PASS
- 2.8 Check IP connectivity - PASS
- 2.9 Check VLAN connectivity - PASS
- 2.10 Kill spine101 - PASS
- 2.11 Check IP connectivity CASE2_Failure - FAIL
- IP connectivity failed
- 2.12 Check VLAN connectivity CASE2_Failure - PASS
- 2.13 Recovering spine101 - PASS
- 2.14 Check whether the flow count is bigger than 350 - PASS
- 2.15 Check whether all flow status are ADDED - PASS
- 2.16 Check IP connectivity CASE2_Recovery - PASS
- 2.17 Check VLAN connectivity CASE2_Recovery - PASS
Case 4: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - PASS
- 4.1 Create and Apply cell file - PASS
- 4.2 Create and Install ONOS package - PASS
- 4.3 Starting ONOS service - PASS
- 4.4 Checking if ONOS CLI is ready - PASS
- 4.5 Starting Mininet Topology - PASS
- 4.6 Check whether the flow count is bigger than 116 - PASS
- 4.7 Check whether all flow status are ADDED - PASS
- 4.8 Check IP connectivity - PASS
- 4.9 Check VLAN connectivity - PASS
- 4.10 Kill spine101 - PASS
- 4.11 Check IP connectivity CASE3_Failure - PASS
- 4.12 Check VLAN connectivity CASE3_Failure - PASS
- 4.13 Recovering spine101 - PASS
- 4.14 Check whether the flow count is bigger than 116 - PASS
- 4.15 Check whether all flow status are ADDED - PASS
- 4.16 Check IP connectivity CASE3_Recovery - PASS
- 4.17 Check VLAN connectivity CASE3_Recovery - PASS
Case 5: Package and start ONOS using apps:drivers,segmentrouting,openflow-base,netcfghostprovider,netcfglinksprovider - FAIL
- 5.1 Create and Apply cell file - PASS
- 5.2 Create and Install ONOS package - PASS
- 5.3 Starting ONOS service - PASS
- 5.4 Checking if ONOS CLI is ready - PASS
- 5.5 Starting Mininet Topology - PASS
- 5.6 Check whether the flow count is bigger than 350 - PASS
- 5.7 Check whether all flow status are ADDED - PASS
- 5.8 Check IP connectivity - PASS
- 5.9 Check VLAN connectivity - PASS
- 5.10 Kill spine101 - PASS
- 5.11 Check IP connectivity CASE4_Failure - FAIL
- IP connectivity failed
- 5.12 Check VLAN connectivity CASE4_Failure - PASS
- 5.13 Recovering spine101 - PASS
- 5.14 Check whether the flow count is bigger than 350 - PASS
- 5.15 Check whether all flow status are ADDED - PASS
- 5.16 Check IP connectivity CASE4_Recovery - PASS
- 5.17 Check VLAN connectivity CASE4_Recovery - PASS