FUNCipv6Intent at 20 Jul 2016 11:06:12
commit cb4a3db30bc9fa4540d5ac56d61e8ab1be243790 (HEAD, origin/master, origin/HEAD, master)
Author: Sanjana Agarwal [sanjana@onlab.us]
AuthorDate: Thu Jul 14 11:42:48 2016 -0700
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Tue Jul 19 20:56:08 2016 +0000
Made changes as per comments.
Case 1: Constructing test variables and building ONOS package - PASS
This test case is mainly for loading from params file, and pull and build the latest ONOS package
- 1.1 Constructing test variables - PASS
Case 2: Starting up 1 node(s) ONOS cluster - PASS
Set up ONOS with 1 node(s) ONOS cluster
- 2.1 Apply cell to environment - PASS
- 2.2 Creating ONOS package - PASS
- 2.3 Uninstalling ONOS package - PASS
- 2.4 Installing ONOS package - PASS
- 2.5 Starting ONOS service - PASS
- 2.6 Start ONOS cli - PASS
- 2.7 Checking that ONOS is ready - PASS
- 2.8 setup the ipv6NeighbourDiscovery - PASS
Case 11: Start Mininet topology with OF 1.3 switches - PASS
Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly
- 11.1 Starting Mininet topology with OF 1.3 switches - PASS
Case 12: Assign switches to controllers - PASS
Assign OF 1.3 switches to ONOS nodes
- 12.1 Assigning switches to controllers - PASS
Case 13: Discover all hosts - PASS
- 13.1 Discover all hosts using pingall - PASS
Case 16: Balance mastership of switches - PASS
- 16.1 Balancing mastership of switches - PASS
Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - FAIL
This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet
- 1000.1 IPV6: Add host intents between h1 and h9 - FAIL
- IPV6: Host intent test failed between two IPV6 hosts
- 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL
- DUALSTACK: Host intent test failed between twodual stack host using IPV6
- 1000.3 1HOP: Add host intents between h1 and h3 - FAIL
- 1HOP: Host intent test failed between twohost using IPV6 in the same switch
- 1000.4 VLAN: Add vlan host intents between h5 and h24 - FAIL
- VLAN1: Host intent test failed between twohost using IPV6 in the same VLAN
Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - No Result
- 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - FAIL
- Assertion Result for NOOPTION point intent
- Initial Intent State Failed
- Initial Flow Count Passed
- Initial Flow State Failed
- Initial Ping6all Failed
- Remove Intents Failed
- 2000.2 IPV6: Add point intents between h1 and h9 - FAIL
- Assertion Result for IPV6 point intent
- Initial Intent State Failed
- Initial Flow Count Passed
- Initial Flow State Failed
- Initial Ping6all Failed
- Link Down Passed
- Link Down Topology State Failed
- Link Down Ping6all Failed
- Link Down Intent State Failed
- Link Up Passed
- Link Up Topology State Failed
- Link Up Ping6all Failed
- Link Up Intent State Failed
- Remove Intents Failed
- 2000.3 IPV6_2: Add point intents between h1 and h9 - FAIL
- Assertion Result for IPV6 no mac address point intents
- Initial Intent State Failed
- Initial Flow Count Passed
- Initial Flow State Failed
- Initial Ping6all Failed
- Remove Intents Failed