Have questions? Stuck? Please check our FAQ for some common questions and answers.

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 229 Next »

FUNCipv6Intent at 21 Jul 2016 04:29:23

commit 4a6e91eefa3ab0e1ffc0afc83ca6a149d32d3f27 (HEAD, origin/master, origin/HEAD, master)
Author: Charles Chan [rascov@gmail.com]
AuthorDate: Tue Jul 19 18:36:33 2016 -0700
Commit: Gerrit Code Review [gerrit@onlab.us]
CommitDate: Thu Jul 21 01:34:45 2016 +0000

Fix NPE when ControlPlaneConnectPoint config is added after interface config

Case 1: Constructing test variables and building ONOS package - PASS

This test case is mainly for loading from params file, and pull and build the latest ONOS package

  • 1.1 Constructing test variables - PASS (tick)

Case 2: Starting up 1 node(s) ONOS cluster - PASS

Set up ONOS with 1 node(s) ONOS cluster

  • 2.1 Apply cell to environment - PASS (tick)
  • 2.2 Creating ONOS package - PASS (tick)
  • 2.3 Uninstalling ONOS package - PASS (tick)
  • 2.4 Installing ONOS package - PASS (tick)
  • 2.5 Starting ONOS service - PASS (tick)
  • 2.6 Start ONOS cli - PASS (tick)
  • 2.7 Checking that ONOS is ready - PASS (tick)
  • 2.8 setup the ipv6NeighbourDiscovery - PASS (tick)

Case 11: Start Mininet topology with OF 1.3 switches - PASS

Start mininet topology with OF 1.3 switches to test intents, exits out if topology did not start correctly

  • 11.1 Starting Mininet topology with OF 1.3 switches - PASS (tick)

Case 12: Assign switches to controllers - PASS

Assign OF 1.3 switches to ONOS nodes

  • 12.1 Assigning switches to controllers - PASS (tick)

Case 13: Discover all hosts - PASS

  • 13.1 Discover all hosts using pingall - PASS (tick)

Case 16: Balance mastership of switches - PASS

  • 16.1 Balancing mastership of switches - PASS (tick)

Case 1000: Host Intents Test - 1 NODE(S) - OF 1.3 - FAIL

This test case tests Host intents using 1 node(s) cluster; Different type of hosts will be tested in each step such as IPV6, Dual stack, VLAN etc; The test will use OF 1.3 OVS running in Mininet

  • 1000.1 IPV6: Add host intents between h1 and h9 - FAIL (error)
    • IPV6: Host intent test failed between two IPV6 hosts
  • 1000.2 DUALSTACK1: Add host intents between h3 and h11 - FAIL (error)
    • DUALSTACK: Host intent test failed between twodual stack host using IPV6
  • 1000.3 1HOP: Add host intents between h1 and h3 - FAIL (error)
    • 1HOP: Host intent test failed between twohost using IPV6 in the same switch
  • 1000.4 VLAN: Add vlan host intents between h5 and h24 - FAIL (error)
    • VLAN1: Host intent test failed between twohost using IPV6 in the same VLAN

Case 2000: Point Intents Test - 1 NODE(S) - OF 1.3 - No Result

  • 2000.1 NOOPTION: Add point intents between h1 and h9, ipv6 hosts - FAIL (error)
    • Assertion Result for NOOPTION point intent
    • Initial Intent State Failed
    • Initial Flow Count Passed
    • Initial Flow State Failed
    • Initial Ping6all Failed
    • Remove Intents Passed
  • 2000.2 IPV6: Add point intents between h1 and h9 - FAIL (error)
    • Assertion Result for IPV6 point intent
    • Initial Intent State Failed
    • Initial Flow Count Passed
    • Initial Flow State Failed
    • Initial Ping6all Failed
    • Link Down Passed
    • Link Down Topology State Failed
    • Link Down Ping6all Failed
    • Link Down Intent State Failed
    • Link Up Passed
    • Link Up Topology State Failed
    • Link Up Ping6all Failed
    • Link Up Intent State Failed
    • Remove Intents Passed
  • No labels