Master-HA Sanity

commit 8b1b51e4a509a304e04cc4825b4597c7abad5157 (HEAD, origin/master, origin/HEAD, master)
Author: Aaron Kruglikov [aaron@onlab.us]
AuthorDate: Wed Jul 12 17:26:16 2017 -0700
Commit: Ray Milkey [ray@opennetworking.org]
CommitDate: Thu Jul 13 01:46:39 2017 +0000

Adding a note that Application ID's must be non-negative, this constraint is already written into the default implementation.

Case 1: Setting up test environment - PASS

Setup the test environment including installing ONOS, starting Mininet and ONOScli sessions.

• 1.1 Create cell file - No Result
• 1.2 Applying cell variable to environment - No Result
• 1.3 Starting Mininet - PASS
• 1.4 Git checkout and pull master - No Result
• 1.5 Creating ONOS package - PASS
• 1.6 Installing ONOS package - PASS
• 1.7 Set up ONOS secure SSH - PASS
• 1.8 Checking if ONOS is up yet - PASS
• 1.9 Starting ONOS CLI sessions - PASS
• 1.10 Checking ONOS nodes - PASS
• 1.11 Activate apps defined in the params file - No Result
• 1.12 Set ONOS configurations - PASS
• 1.13 App Ids check - PASS

Case 2: Assigning devices to controllers - PASS

Assign switches to ONOS using 'ovs-vsctl' and check that an ONOS node becomes the master of the device.

• 2.1 Assign switches to controllers - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 21: Assigning Controller roles for switches - PASS

Check that ONOS is connected to each device. Then manually assign mastership to specific ONOS nodes using 'device-role'

• 21.1 Assign mastership of switches to specific controllers - PASS
• 21.2 Check mastership was correctly assigned - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

Compare topology objects between Mininet and ONOS

• 8.1 Comparing ONOS topology to MN topology - PASS
• 8.2 Hosts view is consistent across all ONOS nodes - PASS
• 8.3 Hosts information is correct - PASS
• 8.4 Host attachment points to the network - PASS
• 8.5 Clusters view is consistent across all ONOS nodes - PASS
• 8.6 There is only one SCC - PASS
• 8.7 Device information is correct - PASS
• 8.8 Links are correct - PASS
• 8.9 Hosts are correct - PASS
• 8.10 Checking ONOS nodes - PASS

Case 3: Adding host Intents - PASS

Discover hosts by using pingall then assign predetermined host-to-host intents. After installation, check that the intent is distributed to all nodes and the state is INSTALLED

• 3.1 Install reactive forwarding app - PASS
• 3.2 Check app ids - PASS
• 3.3 Discovering Hosts( Via pingall for now ) - PASS
• 3.4 Uninstall reactive forwarding app - PASS
• 3.5 Check app ids - PASS
• 3.6 Add host intents via cli - PASS
• 3.7 Intent Anti-Entropy dispersion - PASS

Case 4: Verify connectivity by sending traffic across Intents - PASS

Ping across added host intents to check functionality and check the state of the intent

• 4.1 Check Intent state - PASS
• 4.2 Ping across added host intents - PASS
• 4.3 Check leadership of topics - PASS
• 4.4 Wait a minute then ping again - PASS

Case 5: Setting up and gathering data for current state - PASS

• 5.1 Check that each switch has a master - PASS
• 5.2 Get the Mastership of each switch from each controller - PASS
• 5.3 Check for consistency in roles from each controller - PASS
• 5.4 Get the intents from each controller - PASS
• 5.5 Check for consistency in Intents from each controller - PASS
• 5.6 Get the flows from each controller - PASS
• 5.7 Check for consistency in Flows from each controller - PASS
• 5.8 Get the OF Table entries - No Result
• 5.9 Start continuous pings - No Result
• 5.10 Collecting topology information from ONOS - No Result
• 5.11 Host view is consistent across ONOS nodes - PASS
• 5.12 Each host has an IP address - PASS
• 5.13 Cluster view is consistent across ONOS nodes - PASS
• 5.14 Cluster view correct across ONOS nodes - PASS
• 5.15 Comparing ONOS topology to MN - PASS
• 5.16 Device information is correct - PASS
• 5.17 Links are correct - PASS
• 5.18 Hosts are correct - PASS

Case 14: Start Leadership Election app - PASS

• 14.1 Install leadership election app - PASS
• 14.2 Run for election on each node - PASS
• 14.3 First node was elected leader - PASS

Case 16: Install Primitives app - PASS

• 16.1 Install Primitives app - PASS

Case 17: Check for basic functionality with distributed primitives - FAIL

Test the methods of the distributed primitives (counters and sets) throught the cli

• 17.1 Increment then get a default counter on each node - PASS
• 17.2 Get then Increment a default counter on each node - PASS
• 17.3 Counters we added have the correct values - PASS
• 17.4 Add -8 to then get a default counter on each node - PASS
• 17.5 Add 5 to then get a default counter on each node - PASS
• 17.6 Get then add 5 to a default counter on each node - PASS
• 17.7 Counters we added have the correct values - PASS
• 17.8 Distributed Set get - PASS
• 17.9 Distributed Set size - PASS
• 17.10 Distributed Set add() - FAIL
• Set add was incorrect
• 17.11 Distributed Set addAll() - FAIL
• Set addAll was incorrect
• 17.12 Distributed Set contains() - FAIL
• Set contains failed
• 17.13 Distributed Set containsAll() - PASS
• 17.14 Distributed Set remove() - FAIL
• Set remove was incorrect
• 17.15 Distributed Set removeAll() - FAIL
• Set removeAll was incorrect
• 17.16 Distributed Set addAll() - FAIL
• Set addAll was incorrect
• 17.17 Distributed Set clear() - FAIL
• Set clear was incorrect
• 17.18 Distributed Set addAll() - FAIL
• Set addAll was incorrect
• 17.19 Distributed Set retain() - FAIL
• Set retain was incorrect
• 17.20 Partitioned Transactional maps put - PASS
• 17.21 Partitioned Transactional maps get - FAIL
• Partitioned Transactional Map values incorrect
• 17.22 Get the value of a new value - FAIL
• Error getting atomic Value None, found: ['null', 'null', 'null', None, 'null', 'null', 'null']
• 17.23 Atomic Value set() - FAIL
• Error setting atomic Value[1, 1, 1, -1, 1, 1, 1]
• 17.24 Get the value after set() - FAIL
• Error getting atomic Value foo, found: ['foo', 'foo', 'foo', None, 'foo', 'foo', 'foo']
• 17.25 Atomic Value compareAndSet() - PASS
• 17.26 Get the value after compareAndSet() - FAIL
• Error getting atomic Value bar, found: ['bar', 'bar', 'bar', None, 'bar', 'bar', 'bar']
• 17.27 Atomic Value getAndSet() - PASS
• 17.28 Get the value after getAndSet() - FAIL
• Error getting atomic Value: expected baz, found: ['baz', 'baz', 'baz', None, 'baz', 'baz', 'baz']
• 17.29 Atomic Value destory() - PASS
• 17.30 Get the value after destroy() - FAIL
• Error getting atomic Value None, found: ['null', 'null', 'null', None, 'null', 'null', 'null']
• 17.31 Work Queue add() - PASS
• 17.32 Check the work queue stats - No Result

Case 6: Wait 60 seconds instead of inducing a failure - PASS

Case 8: Compare ONOS Topology view to Mininet topology - PASS

• 8.1 Comparing ONOS topology to MN topology - FAIL
• ONOS topology don't match Mininet
• 8.2 Hosts view is consistent across all ONOS nodes - FAIL
• ONOS nodes have different views of hosts
• 8.3 Hosts information is correct - FAIL
• Host information is incorrect
• 8.4 Host attachment points to the network - PASS